Sreejith, Nair M; Dr.Mohanan, P(Cochin University Of Science And Technology, October 7, 2013)
[+]
[-]
Abstract:
With the recent progress and rapid increase in the field of communication, the designs of antennas for small mobile terminals with enhanced radiation characteristics are acquiring great importance. Compactness, efficiency, high data rate capacity etc. are the major criteria for the new generation antennas. The challenging task of the microwave scientists and engineers is to design a compact printed radiating structure having broadband behavior along with good efficiency and enhanced gain. Printed antenna technology has received popularity among antenna scientists after the introduction of planar transmission lines in mid-seventies. When we view the antenna through a transmission line concept, the mechanism behind any electromagnetic radiator is quite simple and interesting. Any electromagnetic system with a discontinuity is radiating electromagnetic energy. The size, shape and orientation of the discontinuities control the radiation characteristics of the system such as radiation pattern, gain, polarization etc. It can be either resonant or non-resonant.
This thesis deals with antennas that are developed from a class of transmission lines known as coplanar strip-CPS, a planar analogy of parallel pair transmission line. The specialty of CPS is its symmetric structure compared to other transmission lines, which makes the antenna structures developed from CPS quite simple for design and fabrication. The structural modifications on either metallic strip of CPS results in different antennas. The first part of the thesis discusses a single band and dual band design derived from open ended slot lines which are very much suitable for 2.4 and 5.2 GHz WLAN applications. The second section of the study is vectored into the development of enhanced gain dipoles. A single band dipole and a wide band enhanced gain dipole suitable for 5.2/5.8 GHZ band and imaging applications are developed and discussed. Last part of the thesis discusses the development of directional UWBs. Three different types of ultra-compact UWBs are developed and almost all the frequency domain and time domain analysis of the structures are discussed.
Description:
Department of Electronics
Cochin University of Science and Technology
Sudheep, Elayidom M; Dr.Sumam Mary,Idicula(Cochin University of Science and Technology, 2012)
[+]
[-]
Abstract:
Data mining is one of the hottest research areas nowadays as it has got wide variety of applications in common man’s life to make the world a better place to live. It is all about finding interesting hidden patterns in a huge history data base. As an example, from a sales data base, one can find an interesting
pattern like “people who buy magazines tend to buy news papers also” using data mining. Now in the sales point of view the advantage is that one can place these things together in the shop to increase sales. In this research work, data mining is effectively applied to a domain called placement chance prediction, since taking wise career decision is so crucial for anybody for sure. In India technical manpower analysis is carried out by an organization named National Technical Manpower Information System (NTMIS), established in 1983-84 by India's Ministry of Education & Culture. The NTMIS comprises of a lead centre in the IAMR, New Delhi, and 21 nodal centres located at different parts
of the country. The Kerala State Nodal Centre is located at Cochin University of Science and Technology. In Nodal Centre, they collect placement information by sending postal questionnaire to passed out students on a regular basis. From this raw data available in the nodal centre, a history data base was prepared. Each record in this data base includes entrance rank ranges, reservation, Sector, Sex, and a particular engineering. From each such combination of attributes from the history data base of student records, corresponding placement chances is computed and stored in the history data base. From this data, various popular data mining models are built and tested. These models can be used to predict the most suitable branch for a particular new student with one of the above combination of criteria.
Also a detailed performance comparison of the various data mining models is done.This research work proposes to use a combination of data mining models namely a hybrid stacking ensemble for better predictions. A strategy to predict the overall absorption rate for various branches as well as the time it takes for all the students of a particular branch to get placed etc are also proposed.
Finally, this research work puts forward a new data mining algorithm namely C 4.5 * stat for numeric data sets which has been proved to have competent accuracy over standard benchmarking data sets called UCI data sets. It also proposes an optimization strategy called parameter tuning to
improve the standard C 4.5 algorithm.
As a summary this research work passes through all four dimensions for a typical data mining research work, namely application to a domain, development of classifier models, optimization and ensemble methods.
Description:
Department of Computer Science, Cochin University of Science and Technology
Suresh, Kumar P; Dr. Radhakrishnan, P(Cochin University of Science & Technology, October , 2003)
[+]
[-]
Abstract:
In recent years,photonics has emerged as an essential technology related to such diverse fields like laser technology,fiber optics,communication,optical signal processing,computing,entertainment,consumer electronics etc.Availabilities of semiconductor lasers and low loss fibers have also revolutionized the field of sensor technology including telemetry. There exist fiber optic sensors which are sensitive,reliable.light weight and accurate devices which find applications in wide range of areas like biomedicine,aviation,surgery,pollution monitoring etc.,apart from areas in basic sciences.The present thesis deals with the design,fabrication and characterization of a variety of cost effective and sensitive fiber optic sensors for the trace detetction of certain environment pollutants in air and water.The sensor design is carried out using the techniques like evanescent waves,micro bending and long period gratings.
Description:
International School of Photonics,
Cochin University of Science and Technology
Reji Kumar, R; Dr. Jacob, Philip(Cochin University of Science and Technology, December , 2009)
[+]
[-]
Abstract:
Hevea latex is a natural biological liquid of very complex composition .Besides rubber hydrocarbons,it contains many proteinous and resinous substances,carbohydrates,inorganic matter,water,and others.The Dry Rubber Content (DRC) of latex varies according to season, tapping system,weather,soil conditions ,clone,age of the tree etc. The true DRC of the latex must be determined to ensure fair prices for the latex during commercial exchange.The DRC of Hevea latex is a very familiar term to all in the rubber industry.It has been the basis for incentive payments to tappers who bring in more than the daily agreed poundage of latex.It is an important parameter for rubber and latex processing industries for automation and verious decesion making processes.This thesis embodies the efforts made by me to determine the DRC of rubber latex following different analytical tools such as MIR absorption,thermal analysis.dielectric spectroscopy and NIR reflectance.The rubber industry is still Looking for a compact instrument that is accurate economical,easy to use and environment friendly.I hope the results presented in this thesis will help to realise this goal in the near future.
Description:
Department of Instrumentation,
Cochin University of Science and Technology
Nishamol, M S; Dr.Vasudevan, K(Cochin University of Science and Technology, January 4, 2012)
[+]
[-]
Abstract:
Antennas are necessary and vital components of communication and radar systems, but sometimes their inability to adjust to new operating scenarios can limit system performance. Reconfigurable antennas can adjust with changing system requirements or environmental conditions and provide additional levels of functionality that may result in wider instantaneous frequency bandwidths, more
extensive scan volumes, and radiation patterns with more desirable side lobe distributions. Their agility and diversity created new horizons for different types of applications especially in cognitive radio, Multiple Input Multiple Output Systems, satellites and many other applications. Reconfigurable antennas satisfy the requirements for increased functionality, such as direction finding, beam steering,
radar, control and command, within a confined volume. The intelligence associated with the reconfigurable antennas revolved around switching mechanisms utilized. In the present work, we have investigated frequency reconfigurable polarization diversity antennas using two methods: 1. By using low-loss, high-isolation switches such as PIN diode, the antenna can be structurally reconfigured to maintain the elements near their resonant dimensions for different frequency bands and/or polarization.
2. Secondly, the incorporation of variable capacitors or varactors, to overcome many problems faced in using switches and their biasing. The performances of these designs have been studied using standard simulation tools used in industry/academia and they have been experimentally verified. Antenna design guidelines are also deduced by accounting the resonances. One of the major contributions of the thesis lies in the analysis of the designed antennas using FDTD based numerical computation to validate their performance.
Description:
Department of Electronics, Cochin University of Science and Technology
Dinesh, R; Dr Mohanan, P(Cochin University of Science and Technology, April , 2015)
[+]
[-]
Abstract:
The main objective of this thesis is to design and develop spectral signature
based chipless RFID tags Multiresonators are essential component of
spectral signature based chipless tags. To enhance the data coding capacity in
spectral signature based tags require large number of resonances in a limited
bandwidth. The frequency of the resonators have to be close to each other.
To achieve this condition, the quality factor of each resonance needs to be
high. The thesis discusses about various types of multiresonators, their practical
implementation and how they can be used in design. Encoding of data
into spectral domain is another challenge in chipless tag design. Here, the
technique used is the presence or absence encoding technique. The presence
of a resonance is used to encode Logic 1 and absence of a speci c resonance is
used to encode Logic 0. Di erent types of multiresonators such as open stub
multiresonators, coupled bunch hairpin resonators and shorted slot ground
ring resonator are proposed in this thesis.
Sona, Narayanan; Rani, Joseph; Sreekumar, A; Sudha Kartha, C(Cochin University Of Science And Technology, February , 2015)
[+]
[-]
Abstract:
The main focus of the present study was to develop ideal low band gap D-A copolymers for photoconducting and non-linear optical applications. This chapter summarizes the overall research work done. Designed copolymers were synthesized via direct arylation or Suzuki coupling reactions. Copolymers were characterized by theoretical and experimental methods. The suitability of these copolymers in photoconducting and optical limiting devices has been investigated.The results suggest that the copolymers investigated in the present study have a good non-linear optical response and are comparable to or even better than the D-A copolymers reported in the literature and hence could be chosen as ideal candidates with potential applications for non-linear optics. The results also show that the structures of the polymers have great impact on NLO properties. Copolymers studied here exhibits good optical limiting property at 532 nm wavelength due to two-photon absorption (TPA) process. The results revealed that the two copolymers, (P(EDOT-BTSe) and P(PH-TZ)) exhibited strong two-photon absorption and superior optical power limiting properties, which are much better than that of others.
Rekha, James K; Poulose Jacob,K; Sreela Sasi(Cochin University of Science and Technology, January , 2010)
[+]
[-]
Abstract:
Most of the commercial and financial data are stored in decimal fonn. Recently, support for decimal arithmetic has received increased attention due to the growing importance in financial analysis, banking, tax calculation, currency conversion, insurance, telephone billing and accounting. Performing decimal arithmetic with systems that do not support decimal computations may give a result with representation error, conversion error, and/or rounding error. In this world of precision, such errors are no more tolerable. The errors can be eliminated and better accuracy can be achieved if decimal computations are done using Decimal Floating Point (DFP) units. But the floating-point arithmetic units in today's general-purpose microprocessors are based on the binary number system, and the decimal computations are done using binary arithmetic. Only few common decimal numbers can be exactly represented in Binary Floating Point (BF P). ln many; cases, the law requires that results generated from financial calculations performed on a computer should exactly match with manual calculations. Currently many applications involving fractional decimal data perform decimal computations either in software or with a combination of software and hardware. The performance can be dramatically improved by complete hardware DFP units and this leads to the design of processors that include DF P hardware.VLSI implementations using same modular building blocks can decrease system design and manufacturing cost. A multiplexer realization is a natural choice from the viewpoint of cost and speed.This thesis focuses on the design and synthesis of efficient decimal MAC (Multiply ACeumulate) architecture for high speed decimal processors based on IEEE Standard for Floating-point Arithmetic (IEEE 754-2008). The research goal is to design and synthesize deeimal'MAC architectures to achieve higher performance.Efficient design methods and architectures are developed for a high performance DFP MAC unit as part of this research.
Description:
Department of Computer Science, Cochin University of Science and Technology
Joseph,P M; Dr.Saseendran Pillai,P R(Cochin University of Science & Technology, May , 1992)
[+]
[-]
Abstract:
Systems which employ underwater acoustic energy
for observation or communication are called sonar systems. The active and passive sonars are the two
types of systems used for the detection and localisation
of targets in underwater. Active sonar involves the
transmission of an acoustic signal which, when reflected
from a target, provides the sonar receiver with a basis
for the detection and estimation. Passive sonar bases
its detection and estimation on sounds which emanate
from the target itself--Machinery noise, flow noise,
transmission from its own active sonar etc.Electroacoustic transducers are used in sonar
systems for the transmission and detection of acoustic
energy. The transducer which is used for the transmission
of acoustic energy is called projector and the
one used for reception is called hydrophone. Since a
single transducer is not sufficient enough for long
range and directional transmission, a properly distributed
array of transducers are to be used [9-11].The need and requirement for spatial processing
to generate the most favourable directivity patterns for
transducer systems used in underwater applications have
already been analysed by several investigators [12-21].The desired directivity pattern can be either generated
by the use of suitable focussing techniques or by an
array of non-directional sensor elements, whose arrangements,
spacing and the mode of excitation provide the
required radiation pattern or by the combination of
these.While computing
that
the directivity pattern, it is
assumed strength of the elements are
unaffected by
the
the
source
acoustic pressure at each source.
However, in closely packed a r r a y s , the acoustic interaction
effects experienced among the elements will
modify the behaviour of individual elements and in turn
will reduce the acoust ic source leve 1 wi t h respect to
the maximum t heoret i cal va 1ue a s well as degrade the
beam pa t tern. Th i s ef fect shou 1d be reduced in systems
that are intended to generate high acoustic power output
and unperturbed beam patterns [2,22-31].The work herein presented includes an approach
for designing efficient and well behaved underwater
transd~cer arrays, taking into account the acoustic
interaction effect experienced among the closely packed
multielement arrays.Architectural modifications
reducing the interaction effect
different radiating apertures.
Description:
Department of Electronics, Cochin University
of Science and Technology.