|
Abstract:
|
Systems which employ underwater acoustic energy
for observation or communication are called sonar systems. The active and passive sonars are the two
types of systems used for the detection and localisation
of targets in underwater. Active sonar involves the
transmission of an acoustic signal which, when reflected
from a target, provides the sonar receiver with a basis
for the detection and estimation. Passive sonar bases
its detection and estimation on sounds which emanate
from the target itself--Machinery noise, flow noise,
transmission from its own active sonar etc.Electroacoustic transducers are used in sonar
systems for the transmission and detection of acoustic
energy. The transducer which is used for the transmission
of acoustic energy is called projector and the
one used for reception is called hydrophone. Since a
single transducer is not sufficient enough for long
range and directional transmission, a properly distributed
array of transducers are to be used [9-11].The need and requirement for spatial processing
to generate the most favourable directivity patterns for
transducer systems used in underwater applications have
already been analysed by several investigators [12-21].The desired directivity pattern can be either generated
by the use of suitable focussing techniques or by an
array of non-directional sensor elements, whose arrangements,
spacing and the mode of excitation provide the
required radiation pattern or by the combination of
these.While computing
that
the directivity pattern, it is
assumed strength of the elements are
unaffected by
the
the
source
acoustic pressure at each source.
However, in closely packed a r r a y s , the acoustic interaction
effects experienced among the elements will
modify the behaviour of individual elements and in turn
will reduce the acoust ic source leve 1 wi t h respect to
the maximum t heoret i cal va 1ue a s well as degrade the
beam pa t tern. Th i s ef fect shou 1d be reduced in systems
that are intended to generate high acoustic power output
and unperturbed beam patterns [2,22-31].The work herein presented includes an approach
for designing efficient and well behaved underwater
transd~cer arrays, taking into account the acoustic
interaction effect experienced among the closely packed
multielement arrays.Architectural modifications
reducing the interaction effect
different radiating apertures. |