Choudhury, P K(Microwave and Optical Technology Letters, November 25, 2002)
[+]
[-]
Abstract:
A fairly rigorous analytical treatment of the power characteristics
of dielectric optical waveguides with Piet Hein core-cross
sectional geometry is presented in this paper. This kind of wareguide
structure would be advantageous owing to the absence of corners,
which are found in rectangular guides, resulting in undesirable loss (hit
to the scattering of light. In order to simplify this theoretical approach.
em approximation of vanishing refractive index difference between the
guiding and the non-guiding sections is implemented. The variation eJ
logarithmic power is shown for different dimensions of the core, corresponding
to different azimuthal modal indices. It is found that the nutlet
with higher index values carry less logaritlunic power in the lower tail
of the propagation 's constant range, and this feature affects the higher
tail. A better kind of uniformity of the power distribution is observed
near the higher tail of the range of propagation Constants
Ceramics of composition BaO-Ln2O3-STiO2 have been prepared with four elements (Ln=La,Pr,Nd.Sm) by a conventional solid state ceramic preparation route and the dielectric properties measured in the microwave frequency range
The dielectric ceramics BaNd2Ti3Oto, BaNd2Ti4O12 and BaNd2Ti5O14 have been prepared by
Conventional solid state ceramic route. The sintered ceramic samples have been characterized by
X-ray diffraction and Scanning Electron Microscopy (SEM). The dielectric properties in the
microwave frequency range have been measured using conventional microwave dielectric
resonator methods. The BaNd2Ti1O10, BaN2Ti4O12 and BaNd2Ti5O14 have dielectric constants
(Er) ~ 60, 84 and 77 respectively. They have relatively high quality factors
Abdul Khalam,L; Sreemoolanadhan,H; Ratheesh, R; Mohanan, P; Sebastian,M T(ELSEVIER, 2003)
[+]
[-]
Abstract:
Microwave dielectric resonators (DRs) based on Ba(B1,2Nbi/2)03 [B' = La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Y, Yb, and In] complex
perovskites have been prepared by conventional solid state ceramic route. The dielectric properties (relative permittivity, Er; quality factor, Q;
and resonant frequency, rr) of the ceramics have been measured in the frequency range 4-6 GHz using resonance methods. The resonators
have relatively high dielectric constant in the range 36-45, high quality factor and small temperature variation of resonant frequency. The
dielectric properties are found to depend on the tolerance factor (t), ionic radius (r), and lattice parameter (ap)
Mailadil,Sebastian T; Sam,Solomon; Ravindran,Ratheesh(Regional Research Laboratory, April , 1999)
[+]
[-]
Abstract:
Microwave ceramic dielectric resonators (DRs) based on RETiNbO6
(RE = Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Y, and Yb)
have been prepared using the conventional solid -state ceramic
route. The DR samples are characterized using XRD and SEM
methods. The microwave dielectric properties are measured
using resonant methods and a net work analyzer . The ceramics
based on Ce, Pr, Nd, and Sin have dielectric constants in the
range 32-54 and positive coefficient of thermal variation of
resonant frequency (r,). The ceramics based on Gd, Tb, Dy, Y.
and Yb have dielectric constants in the range 19-22 and
negative Tf
The propagation of pulse waves in coplanar waveguides
(CPWs) is investigated, and these CPWs are assumed to be fabricated
on a single -layer low- temperature co-fired ceramic (LTCC) substrate.
The input pulse wave can be a Gaussian pulse or a sinusoldally modulated
Gaussian pulse. Based on the standard Galerkin 's method in the
spectral domain, combined with fast Fourier transform (FFT), the pulse
waveform and delay in CPWs are demonstrated and compared for a second plate, oriented orthogonally to the primary planar element,
thus producing a crossed planar monopole (CPM), which is
simpler to produce and has lower cost than a conical monopole. In
this paper, further measurements have been made on this element
Suma,M N; Sreedevi, Menon K; Bijumon, P V; Sebastian,M T; Mohanan, P(Microwave and Optical Technology Letters, April 20, 2005)
[+]
[-]
Abstract:
In this paper, we present an effective excitation of a reelangular
dielectric resonator antennas (DRA) with a conductor-hacked
coplanar waveguide (CB-CPW). The radiation and resonance characteristics
are found to van,, depending on the orientation of the DR on
doe coplanar feed line. The effect of finite and infinite ground planes of
CB-CPIV on the radiation characteristics of the rectangular DRA is
studied. The orientation and position of the DR are optimized for maximum
gain and bandwidth. The optimized antenna ,geometry offers
--10.46 dBi gain and 7.5% bandwidth with low cross-polar radiation
characteristics
Paulson,M; Sona,Kundukulam O; Aanandan,C K; Mohanan, P(Department of Electronics, September , 2001)
[+]
[-]
Abstract:
The arrow shaped microstrip antenna, which produces
dual frequency dual polarisation operation with considera-ble size reduction compared to conventional patches has been
reported [I]. These antennas provide greater area reduction and
improved gain compared to drum shaped patches [2]. Prediction
of the resonance frequency of drum shaped patches [3] and circular
patches for broadband operation [4] are available in the literature.
In this Letter, we propose empirical formulas for calculating
the resonance frequencies of the arrow shaped microstrip antenna.
These antennas can be employed for obtaining dual frequency
with the same polarisation, bandwidth enhancement, circular
polarisation etc. by varying its different parameters or by introducing
slots. The proposed design equations provide an easier and
simple way of predicting the resonant frequencies of these patches.
A simple technique for calculating the resonance frequencies of a
compact arrow-shaped microstrip antenna is presented and discussed . The accuracy of the method is validated by experimental results
Sona,Kundukulam O; Paulson,M; Aanandan,C K; Mohanan, P; K G Nair(Department of Electronics, October , 2002)
[+]
[-]
Abstract:
A dual-port microstrip antenna with a crescent shaped
patch with excellent isolation betwecn the ports has been reportcd [I].
Since circular-sided geometries are inore compact than rectangular
oncs, thcy find morc applications in microstrip arrays. The crcscent
shaped antenna geometry [ I ] provides greater area rcductioii compared
to other circular sided patches for broadband operation [2]. In this
Lctter, formulac for calculating thc TM, I and TMZI mode resonant
frequencies of this microstrip antenna, obtained by modifying the
equations of a standard circular patch [3] are presentcd. Thcorctical
results are compared with experimental observations aid the validity
of the computation is established.
Biju Kumar, S; Raveendranath, U; Mohanan, P; Mathew, K T; Hajian,M; Ligthart, L P(Microwave and Optical Technology Letters, July 20, 2000)
[+]
[-]
Abstract:
A simple and efficient method for determining the complex
permittivity of dielectric materials from both reflected and transmitted signals is presented. It is also novel because the technique is implemented using two pyramidal horns without any focusing mechanisms. The dielectric constant of a noninteractive and distributive (NID) mixture of dielectrics is also determined
Vermeeren,G; Rogier,H; Olyslager,F; Zutter De,D(IEE Electronics letters,UK, September 13, 2001)
[+]
[-]
Abstract:
A single-feed rectangular-ring microstrip antenna is proposed for
indoor communication under the Bluetooth protocol. The
dimensions of the antenna together with the location of the feed
point are optimized through field simulations in order to cover the
Bluetooth bandwidth and to avoid linear polarization. The
performance and the efficiency of the antenna are illustrated in a
real indoor environment
Hsieh,Gui-Bin; Chen,Ming-Huang; Wong,Kin-Lu Wong(IEE Electronics letters,UK, June 21, 2001)
[+]
[-]
Abstract:
A novel technique for obtaining dual-hand circular polarization
(CP) radiation of a single-feed circular microstrip antenna in
proposed and demonstrated. By embedding two pain of arc shaped
slots of proper lengths close to the boundary of a circular
patch, and protruding one of the arc-shaped slots with a narrow
slit, the circular microstrip antenna can perform dual-hand CP
radiation using a single probe feed. Details of the antenna design
Binoy,G S; Aanandan,C K; Mohanan, P; Vasudevan, K(Microwave Engineering Group,Department of Electronics, January 5, 2002)
[+]
[-]
Abstract:
A novel dual frequency design of a square microstrip antenna coaxially
fed along the diagonal with a chip capacitor mounted at the bottom of
the stub is introduced. This design provides enhanced area reduction and
good cross-polarization levels. The antenna design can be used as a compact
antenna system where limited size is a major requirement. The details of the
antenna design and experimental results are presented
Sona,Kundukulam O; Manju,Paulson; Aanandan,C K; Mohanan, P(Microwave and Optical Technology Letters, December 5, 2001)
[+]
[-]
Abstract:
Dual frequency operation is achieved from a compact
microstrip antenna by loading a pair of narrow slots close to its radiating
edges. The two frequencies have parallel polarization planes and similar
radiation characteristics. The ratio between the two operating frequencies
can be tuned in the range (1.14-1. 24), which is much smaller than that
of similar designs. The above excellent radiation characteristics are
achieved along with an area reduction of - 75% compared to the
standard rectangular patch
Jianlang,Li; Liren,Liu; Yingchun,Guo; Huaisheng,Wang; Changhe,Zhou(Microwave and Optical Technology Letters, December 20, 1999)
[+]
[-]
Abstract:
The transient interaction between a refraction index grating
and light beams during simultaneous writing and thermal fixing of
a photorefractive hologram is investigated. With a diffusion- and
photovoltaic-dominated carrier transport mechanism and carrier thermal
activation (temperature dependent) considered in Fe:LiNbO3 crystal, from
the standpoint of field-material coupling, the theoretical thermal fixing
time and the space-charge field buildup, spatial distribution, and temperature
dependence are given numerically by combining the band transport
model with mobile ions with the coupled-wave equation
Design and development of a new feed -horn antenna
with low sidelobe levels is reported . The E-walls of this
antenna are fabricated with low -loss dielectric substrate ,
periodicallyloaded with thin conducting strips . The antenna
is found to be simulating the radiation characteristics of metallic
Corrugated horns . This can be an ideal substitute for metallic
Corrugated horns with added advantages like light -weight and low
production cost
The (Ba1-x Srx) (Nd1/2, Nb1/2) O3 ceramics have been prepared by the conventional
ceramic route for different values of x. Addition of a small amount of
CeO2(1 wt%) as a sintering aid increased the density of the samples. The structure
and microstructure of the sintered samples are studied by X-ray diffraction
and SEM methods. The dielectric properties of the samples are measured in the
microwave frequency region as a function of composition. The dielectric constant
decreases as x increases. The coefficient of thermal variation of resonant
frequency decreases as the Sr content increases and goes to the negative side.
The dielectric properties of (Ba1-x Srx) (Nd1/2, Nb1/2) O3 are in the range suitable
for application as dielectric resonators in microwave circuits
Pazhoor Bijumon, Varghese; Mohanan, P; Mailadil, Thomas Sebastian(The Japan Society of Applied Physics, 2002)
[+]
[-]
Abstract:
Microwave ceramic dielectric materials Ca5Nb2TiO12 and Ca5Ta2TiO12 have been prepared by a conventional solid-state
ceramic process. The structure was studied by X-ray diffraction and the dielectric properties were characterized at microwave
frequencies. The ceramics posses a relatively high dielectric constant, very low dielectric loss (Q5 x f > 30000GHz) and
small temperature variation of resonant frequency. These materials are potential candidates for dielectric resonator
applications in microwave integrated circuits. [DOI: 10. 1 143/JJAP.41.3834]
Dielectric ceramics based on solid solution phases of [RE1_x= REr]TiNb06, where REI_s = Nd, Pr, Sm and RE' = Dy, Gd and Y, were prepared by the conventional solid-state ceramic route for values of x. The ceramic samples are characterized by X-ray diffraction and microwave methods. Ceramics based on RE (Pr, Nd and Sm) belonging to aeschynite group shows positive value of Tf and those based on RE (Gd, Dy and Y) belonging to euxenite group show negative value of r f. The solid solution phases between the aeschynite and the euxenite group shows intermediate dielectric constant and r f values. The results indicate the possibility of tailoring the dielectric properties by varying the composition of the solid solution phases. The range of solid solubility of euxenite in aeschenite and aeschenite
in euxenite are different for different rare earth ions