| URI: | http://dyuthi.cusat.ac.in/purl/5469 |
| Files | Size |
|---|---|
| Dyuthi T-2510.pdf | (5.567Mb) |
| Abstract: | We are in the cutting edge of a new era of development without leaving any promises to next generation. But the scale and size of the problem are only partially blamed. The juggernaut of Globalisation has trampled upon whatever little hope we might have had making a quick transition to a less energy – intensive world. “Environment friendliness begins at home”. Our quest for productivity and profitability should progress simultaneous with our cooperative responsibility of leaving behind a clean and green earth for the generation to come. Climate change is the most pressing global environmental challenge being faced by humanity, with the quest for better productivity for our fragile ecosystem. It is too late to rely solely on reduction in Green house gas emissions to mitigate climate change although this is undoubtedly crucial. Coastal belts are more prone to these devastating impacts and its protection is an intensive filed of research. The present study describes how the colourful Carotenoids and Chlorophylls can be used in rapid hand on tool in conjunction with molecular biology to open sources and it also explores the fate of organic matter in the aquatic system and underlying sediments. |
| Description: | Department of Chemical Oceanography, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2151 |
| Files | Size |
|---|---|
| Dyuthi-T0510.pdf | (7.907Mb) |
| Abstract: | The marine microorganisms are yet to be exploited as a source of natural pigments for probable utilization in various industries. Hence, in this study focus was made only on pigment producing marine bacteria for pigment production and evaluation of the same for some application besides development of an ideal bioprocess for subsequent indigenous production of the pigment using the same organism towards ultimate industrial application. |
| Description: | Department of Biotechnology, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2805 |
| Files | Size |
|---|---|
| Dyuthi-T0826.pdf | (7.837Mb) |
| Abstract: | The main objectives of the investigations reported in the present thesis are the following: (1) to find out some industrial wastes as cheaper additives to augment the air-blowing polymerization process of bitumen. This will bring down the cost of production of industrial bitumen which can be applied for the manufacture of bitumenous paints, roofing and flooring materials etc. (2) to find out suitable promoters for the above additives. This will bring down the consumption of the additives (3) to help in the industrial pollution control (4) to investigate the usefulness of the industrial bitumen produced in the production of bituminous paints (5) to find out thekinetic parameters of the reactions invovled with different additives. This is essential for the design, construction and operation of new industrial bitumen plants using the additives investigated. This will also enable us to establish the mechanism of the reactions involved in the process |
| Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3765 |
| Files | Size |
|---|---|
| Dyuthi-T1726.pdf | (2.841Mb) |
| Abstract: | Rapid changes in the technological environment of marine logistics and the increasing integration of waterborne, air and land transport systems have fostered a revolution in the design and operations of transport vehicles, cargo handling technology, and terminal facilities. This in turn has caused major changes in the functions of and uses of ports. From literature, it was found that these changes were very slow in case of Indian ports and the performances of port operations were poor when compared with similar ports in the same region. It was also found that a very few studies were conducted to identify the reasons for slow improvements in the performances of Indian major ports. In this thesis, an attempt is made to find out the operational problems of Indian major ports and to analyze the reasons for it. Some solutions have also been found out using management tools |
| Description: | School of Management Studies, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3841 |
| Files | Size |
|---|---|
| Dyuthi-T1772.pdf | (70.76Mb) |
| Abstract: | This proposed thesis is entitled “Plasma Polymerised Organic Thin Films: A study on the Structural, Electrical, and Nonlinear Optical Properties for Possible Applications. Polymers and polymer based materials find enormous applications in the realm of electronics and optoelectronics. They are employed as both active and passive components in making various devices. Enormous research activities are going on in this area for the last three decades or so, and many useful contributions are made quite accidentally. Conducting polymers is such a discovery, and eversince the discovery of conducting polyacetylene, a new branch of science itself has emerged in the form of synthetic metals. Conducting polymers are useful materials for many applications like polymer displays, high density data storage, polymer FETs, polymer LEDs, photo voltaic devices and electrochemical cells. With the emergence of molecular electronics and its potential in finding useful applications, organic thin films are receiving an unusual attention by scientists and engineers alike. This is evident from the vast literature pertaining to this field appearing in various journals. Recently, computer aided design of organic molecules have added further impetus to the ongoing research activities in this area. Polymers, especially, conducting polymers can be prepared both in the bulk and in the thinfilm form. However, many applications necessitate that they are grown in the thin film form either as free standing or on appropriate substrates. As far as their bulk counterparts are concerned, they can be prepared by various polymerisation techniques such as chemical routes and electrochemical means. A survey of the literature reveals that polymers like polyaniline, polypyrrole, polythiophene, have been investigated with a view to studying their structural electrical and optical properties. Among the various alternate techniques employed for the preparation of polymer thin films, the method of plasma polymerisation needs special attention in this context. The technique of plasma polymerisation is an inexpensive method and often requires very less infra structure. This method includes the employment of ac, rf, dc, microwave and pulsed sources. They produce pinhole free homogeneous films on appropriate substrates under controlled conditions. In conventional plasma polymerisation set up, the monomer is fed into an evacuated chamber and an ac/rf/dc/ w/pulsed discharge is created which enables the monomer species to dissociate, leading to the formation of polymer thin films. However, it has been found that the structure and hence the properties exhibited by plasma polymerized thin films are quite different from that of their counterparts produced by other thin film preparation techniques such as electrochemical deposition or spin coating. The properties of these thin films can be tuned only if the interrelationship between the structure and other properties are understood from a fundamental point of view. So very often, a through evaluation of the various properties is a pre-requisite for tailoring the properties of the thin films for applications. It has been found that conjugation is a necessary condition for enhancing the conductivity of polymer thin films. RF technique of plasma polymerisation is an excellent tool to induce conjugation and this modifies the electrical properties too. Both oxidative and reductive doping can be employed to modify the electrical properties of the polymer thin films for various applications. This is where organic thin films based on polymers scored over inorganic thin films, where in large area devices can be fabricated with organic semiconductors which is difficult to achieve by inorganic materials. For such applications, a variety of polymers have been synthesized such as polyaniline, polythiophene, polypyrrole etc. There are newer polymers added to this family every now and then. There are many virgin areas where plasma polymers are yet to make a foray namely low-k dielectrics or as potential nonlinear optical materials such as optical limiters. There are also many materials which are not been prepared by the method of plasma polymerisation. Some of the materials which are not been dealt with are phenyl hydrazine and tea tree oil. The advantage of employing organic extracts like tea tree oil monomers as precursors for making plasma polymers is that there can be value addition to the already existing uses and possibility exists in converting them to electronic grade materials, especially semiconductors and optically active materials for photonic applications. One of the major motivations of this study is to synthesize plasma polymer thin films based on aniline, phenyl hydrazine, pyrrole, tea tree oil and eucalyptus oil by employing both rf and ac plasma polymerisation techniques. This will be carried out with the objective of growing thin films on various substrates such as glass, quartz and indium tin oxide (ITO) coated glass. There are various properties namely structural, electrical, dielectric permittivity, nonlinear optical properties which are to be evaluated to establish the relationship with the structure and the other properties. Special emphasis will be laid in evaluating the optical parameters like refractive index (n), extinction coefficient (k), the real and imaginary components of dielectric constant and the optical transition energies of the polymer thin films from the spectroscopic ellipsometric studies. Apart from evaluating these physical constants, it is also possible to predict whether a material exhibit nonlinear optical properties by ellipsometric investigations. So further studies using open aperture z-scan technique in order to evaluate the nonlinear optical properties of a few selected samples which are potential nonlinear optical materials is another objective of the present study. It will be another endeavour to offer an appropriate explanation for the nonlinear optical properties displayed by these films. Doping of plasma polymers is found to modify both the electrical conductivity and optical properties. Iodine is found to modify the properties of the polymer thin films. However insitu iodine doping is tricky and the film often looses its stability because of the escape of iodine. An appropriate insitu technique of doping will be developed to dope iodine in to the plasma polymerized thin films. Doping of polymer thin films with iodine results in improved and modified optical and electrical properties. However it requires tools like FTIR and UV-Vis-NIR spectroscopy to elucidate the structural and optical modifications imparted to the polymer films. This will be attempted here to establish the role of iodine in the modification of the properties exhibited by the films |
| URI: | http://dyuthi.cusat.ac.in/purl/660 |
| Files | Size |
|---|---|
| Dyuthi-T0365.pdf | (7.009Mb) |
| Abstract: | HINDI |
| Description: | Department of Hindi,CUSAT |
| URI: | http://dyuthi.cusat.ac.in/purl/4798 |
| Files | Size |
|---|---|
| Dyuthi-T1895.pdf | (5.579Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/1294 |
| Files | Size |
|---|---|
| Sheela V P 1985.PDF | (79.28Kb) |
| Abstract: | HINDI |
| Description: | Department of Hindi, Cochin University of Science 8. Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/4858 |
| Files | Size |
|---|---|
| Dyuthi-T1955.pdf | (12.41Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/5506 |
| Files | Size |
|---|---|
| Dyuthi T-2548.pdf | (18.12Mb) |
| Abstract: | This thesis attempts to gain insight on the mathematical approach to estuarine oceanographic systems; also to closely understand the governing processes in the estuarine environment as well as in the adjoining river reaches. The main aim was to conduct pollution routing for tropical estuarine environment namely, for the Cochin estuary. In this context, attempts have been made to apply, verify and validate the application of models, pre- prepared with necessary modifications to suit the area of interest by use of RIVMIX and WASP tools. Finally the thesis concludes by highlighting the advantages and limitations in modelling water bodies and concurrentlysimulates most of the possible scenarios within the purview of this work. |
| Description: | Department of Physical Oceanography, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2819 |
| Files | Size |
|---|---|
| Dyuthi-T0839.pdf | (8.802Mb) |
| Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/xmlui/purl/1965 |
| Files | Size |
|---|---|
| Dyuthi-T0441.pdf | (10.50Mb) |
| Abstract: | Polycyclic Aromatic Hydrocarbons and other toxic compounds from industrial effluents are noted for their high potency for skin, lung, bladder and gastrointestinal cancers. Increased industrialization, and population growth led to greater production of wastes, Pesticides and PAHs have received attention due to their carcinogenic effects. The main objectives of the study were; to collect base line data on the concentration of PAHs in seawater and sediment from the west coast of India, the concentration of PAHs in certain species of fishes, the comparative levels of PAHs in fish, the influence of sediment characteristics on the concentration of PAH in sediment, changes in PAH concentration in water, sediment and fish, to provide a base line concentration of trace metals in water, sediment and fish, the seasonal changes in content of selected trace metals in water, sediment and fish from the west coast of India. The present study revealed that a predominance of silt and clay at all stations in the off Cochin area. The study has provided comprehensive information available to date for PAHs in seawater, sediment and fishes from the west cost of India especially from the Quilon to Mangalore region. |
| URI: | http://dyuthi.cusat.ac.in/purl/751 |
| Files | Size |
|---|---|
| Dyuthi-T0188.pdf | (6.246Mb) |
| Abstract: | As the application of polymeric complexes is enormous, there exists a continuing interest in the synthesis and characterization of these complexes. The synthetic and characterization parts are very important in an academic point of view. Further in an application point of view also polymeric ligands/complexes are gaining attention.The thesis is divided in to six chapters, in which the first chapter gives an introduction along with a brief review on polymeric ligands/ complexes. The second chapter explains the different procedure adopted for the whole work along with the details of the reagents/ instruments used. The third chapter gives a report of the detailed study regarding the synthesis and characterization of eighteen complexes. While the fourth chapter is a report of the ion removal studies using three polymeric ligands, the fifth chapter explains the development of a polymeric complex as ion selective electrode material for the fabrication of a CC ion selective electrode. The sixth chapter presents the summary and tables, figures and references are given separately at the end. |
| Description: | Department of Applied Chemistry, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3823 |
| Files | Size |
|---|---|
| Dyuthi-T1754.pdf | (1.744Mb) |
| Abstract: | The current research investigates the possibility of using single walled carbon nanotubes (SWNTs) as filler in polymers to impart several properties to the matrix polymer. SWNTs in a polymer matrix like poly(ethylene terephthalate) induce nucleation in its melt crystallization, provide effective reinforcement and impart electrical conductivity. We adopt a simple melt compounding technique for incorporating the nanotubes into the polymer matrix. For attaining a better dispersion of the filler, an ultrasound assisted dissolution-evaporation method has also been tried. The resulting enhancement in the materials properties indicates an improved disentanglement of the nanotube ropes, which in turn provides effective matrix-filler interaction. PET-SWNT nanocomposite fibers prepared through melt spinning followed by subsequent drawing are also found to have significantly higher mechanical propertiesas compared to pristine PET fiber.SWNTs also find applications in composites based on elastomers such as natural rubber as they can impart electrical conductivity with simultaneous improvement in the mechanical properties. |
| Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2206 |
| Files | Size |
|---|---|
| Dyuthi-T0560.pdf | (6.843Mb) |
| Description: | School of environmental studies, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2172 |
| Files | Size |
|---|---|
| Dyuthi-T0524.pdf | (3.318Mb) |
| Abstract: | Phosphate (Pi) is one among the most important essential residues in maintenance and inheritance of life, with far diverse physiological role as structural, functional and energy transduction. Phosphate accumulation in wastewaters containing run off of fertilizers and industrial discharges is a global problem that results in algal blooms in bays, lakes and waterways. Currently available methods for removing phosphates from wastewater are based primarily on polyP accumulation by the activated sludge bacteria. PolyP plays a critical role in several environmental and biotechnological problems. Possible relation of interaction between polyP accumulation phenomenon, the low biomass, low Pi uptake, and varying results obtained in response to the impact of sodium chloride, pH, temperature, various inorganic salts and additional carbon sources studied, are all intriguing observations in the present investigation. The results of the present study have evidenced very clearly the scope for potential strains of bacteria from both sea water and marine sediments which could be exploited both for Pi removal in wastewater released by industries and intensive aquaculture practices in to the aquatic environment as well as to harness the potential strains for industrial production of polyP which was wide range of applications. |
| URI: | http://dyuthi.cusat.ac.in/purl/117 |
| Files | Size |
|---|---|
| Dyuthi-T0187.pdf | (6.192Mb) |
| Abstract: | PP has been getting much attention over the years because it is a very durable polymer commonly used in aggressive environments including automotive battery casings, fuel containers etc. They are used to make bottles, fibers for clothing, components in cars etc. However, it has some shortcomings such as low dimensional and thermal stability. Materials such as metal oxides with sizes of the order 1–50 nm have received a great deal of attention because of their versatile applications in polymer/ inorganic nanocomposites, optoelectronic devices, biomedical materials, and other areas. They are stable under harsh process conditions and also regarded as safe materials to human beings and animals. In the present investigation, PP is modified by incorporating metal oxide nanoparticles such as ZnO and TiO2 by simple melt mixing method. Melt spinning method was used to prepare PP/metal oxide nanocomposite fibers. Various studies have been carried out on these composites and fibers. In the first part of the study, ZnO nanoparticles were prepared from ZnCl2 and NaOH in presence of chitosan, PVA, ethanol and starch. This is a simple and inexpensive method compared to other methods. Change in morphology and particle size of ZnO were studied. Least particle size was obtained in chitosan medium. The particles were characterized by using XRD, SEM, TEM, TGA and EDAX. Antibacterial properties of ZnO prepared in chitosan medium (NZO) and commercial zinc oxide (CZO) were evaluated using a gram positive and a gram negative bacteria |
| Description: | Department of Polymer Science and Rubber Technology Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3268 |
| Files | Size |
|---|---|
| Dyuthi-T1242.pdf | (8.215Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/5519 |
| Files | Size |
|---|---|
| Dyuthi T-2561.pdf | (18.12Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.