Abstract: | This thesis Entitled entrepreneurship and motivation in small business sector of kerala -A study of rubber products manufacturing industry.Rubber-based industry in Kerala was established only in the first half of the 20th century.the number of licensed manufacturers in the State has increased substantially over the years, particularly in the post- independence period. 54 rubber manufacturing units in 1965-66, the number of licensed rubber-based industrial units has increased to 1300 units in 2001-02. In 2001-02 Kerala occupied the primary position in the number of rubber goods manufacturers in the country.As per the latest report of the Third All India Census of Small Scale Industries 2001-02, Kerala has the third largest number of registered small scale units in the country next after Tamil Nadu and Utter Pradesh.This study of entrepreneurship in the small-scale rubber goods manufacturing industry in Kerala compares a cross section of successful and unsuccessful entrepreneurs with respect to socio-economic characteristics and motivational dynamics. Based on a sample survey of 120 entrepreneurs of Kottayam and Ernakulam districts successful and unsuccessful entrepreneurs were selected using multiple criteria. The study provides guidelines for the development of entrepreneurship in Kerala.The results on the socio-economic survey support the hypothesis that the successful entrepreneurs will differ from unsuccessful entrepreneurs with respect to education, social contacts, initial investment, sales turnover, profits, capital employed, personal income, and number of employees.Successful entrepreneurs were found to be self~starters. Successful entrepreneurs adopted a lot more technological changes than unsuccessful entrepreneurs. Successful entrepreneurs were more innovative — the percent of successful entrepreneurs and unsuccessful entrepreneurs reporting innovations in business were 31.50 and 8.50 percent respectively. |
Description: | Department of Applied Economics, Cochin University of Science and Technology. |
URI: | http://dyuthi.cusat.ac.in/purl/3078 |
Files | Size |
---|---|
Dyuthi-T1052.pdf | (5.656Mb) |
Abstract: | This thesis Entitled Environmental impact of Sand Mining :A case Study in the river catchments of vembanad lake southwest india.The entire study is addressed in nine chapters. Chapter l deals with the general introduction about rivers, problems of river sand mining, objectives, location of the study area and scope of the study. A detailed review on river classification, classic concepts in riverine studies, geological work of rivers and channel processes, importance of river ecosystems and its need for management are dealt in Chapter 2. Chapter 3 gives a comprehensive account of the study area - its location, administrative divisions, physiography, soil, geology, land use and living and non-living resources. The various methods adopted in the study are dealt in Chapter 4. Chapter 5 contains river characteristics like drainage, environmental and geologic setting, channel characteristics, river discharge and water quality of the study area. Chapter 6 gives an account of river sand mining (instream and floodplain mining) from the study area. The various environmental problems of river sand mining on the land adjoining the river banks, river channel, water, biotic and social / human environments of the area and data interpretation are presented in Chapter 7. Chapter 8 deals with the Environmental Impact Assessment (EIA) and Environmental Management Plan (EMP) of sand mining from the river catchments of Vembanad lake. |
Description: | Environmental Sciences Division, Centre for Earth Science Studies |
URI: | http://dyuthi.cusat.ac.in/purl/3123 |
Files | Size |
---|---|
Dyuthi-T1097.pdf | (13.85Mb) |
Description: | Faculty of Marine Sciences, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/xmlui/purl/1933 |
Files | Size |
---|---|
Dyuthi-T0337.pdf | (8.766Mb) |
Abstract: | Tropical cyclones genesis, movement and intensification are highly dependent on its environment both oceanic and atmospheric. This thesis has made a detailed study on the environmental factors related to tropical cyclones of North Indian Ocean basin. This ocean basin has produced only 6% of the global tropical cyclones annually but it has caused maximum loss of human life associated with the strong winds, heavy rain and particularly storm surges that accompany severe cyclones as they strike the heavily populated coastal areas. Atmospheric factors studied in the thesis are the moisture content of the atmosphere, instability of the atmosphere that produces thunderstorms which are the main source of energy for the tropical cyclone, vertical wind shear to which cyclones are highly sensitive and the Sub-Tropical westerly Jetsteram and its Asian high speed center. The oceanic parameters studied are sea surface temperature and heat storage in the top layer of the ocean. A major portion of the thesis has dealt with the three temporal variabilities of tropical cyclone frequency namely intra-seasonal (mainly the influence of Madden Julian Oscillation), inter- annual (the relation with El Nino Southern Oscillation) and decadal variabilities. Regarding decadal variability, a prominent four decade oscillation in the frequency of both tropical cyclones and monsoon depressions unique to the Indian Ocean basin has been brought out. The thesis consists of 9 chapters. |
Description: | Department of Atmospheric Sciences, Cochin University of Science and Technology, |
URI: | http://dyuthi.cusat.ac.in/purl/3682 |
Files | Size |
---|---|
Dyuthi-T1649.pdf | (26.41Mb) |
Abstract: | In the last decades considerable headway has been made in research and development of phyto-chemical pesticides. The most notable recent success is the commercial development of neem products for insect control. The present investigation on Environmentally Compatible Phyto-Chemical Larvicides for Mosquito Control was undertaken to identify plants of the locality with potential larvicidal activity on mosquito larvae. This has been achieved by screening 17 plant species against four mosquito species. The observation and data are compiled in six chapters . |
Description: | School of Environmental Studies, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3386 |
Files | Size |
---|---|
Dyuthi-T1363.pdf | (3.657Mb) |
Description: | The School of Management Studies, CUSAT |
URI: | http://dyuthi.cusat.ac.in/purl/2679 |
Files | Size |
---|---|
Dyuthi-T0731.pdf | (18.63Mb) |
Abstract: | The base concept from which the entire research problem emerged is as follows: Lack of spatial planning and effective development management system lead to urban sprawl with non-optimal density of population to support urban infrastructure on the one side causing a lesser quality of life in urban areas. On the other side it causes loss of productivity of natural ecosystems and agricultural areas due to disturbance to the ecosystems. Planned compact high density development with compatible mixed land use can go a long way in achieving environmental efficiency of development management system. |
Description: | School Of Management Studies Cochin University Of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3839 |
Files | Size |
---|---|
Dyuthi-T1770.pdf | (4.757Mb) |
Description: | School of Management Studies, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2293 |
Files | Size |
---|---|
Dyuthi-T0585.pdf | (9.580Mb) |
Abstract: | The present study focuses attention on the social phenomenon of environmental protection pressure groups in Kerala. A detailed historical background of environmental protection pressure groups at international and national scenes as background for this study .Emphirical studies of environmental protection pressure groups in Kerala with special reference to industrial pollution is dicussed in detail . The main objective of the study is to identify the factors that make pressure groups succeed or fail in achieving their set objectives.The factors include the structure and strategies of social pressure groups and the support they receive from the environment. |
Description: | School of management studies, Cochin University of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3492 |
Files | Size |
---|---|
Dyuthi-T1480.pdf | (15.82Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1260 |
Files | Size |
---|---|
Pereira Gladys Myrtle 1986.PDF | (2.555Mb) |
Abstract: | In the case of urban centres of the developing countries, corrective measures for the environmental consequences of spontaneous or wrongly planned developments are often prohibitively costly. Hence environmentally planned development alone appears to be the solution for which, a compre-hensive assessment of all the resources is an essential pre—requisite. An under-standing of the prevailing environmental conditions is essential for the effective management and execution of programmes for sustainable development. The present work is a modest attempt at assessing the environmental resources of Cochin, the industrial and business capital of Kerala and a fast developing metropolis. |
Description: | School of Environmental Studies, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3654 |
Files | Size |
---|---|
Dyuthi-T1576.pdf | (7.707Mb) |
Description: | Department of Marine Geology & Geophysics, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2995 |
Files | Size |
---|---|
Dyuthi-T0975.pdf | (5.519Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1325 |
Files | Size |
---|---|
Antony C A 1988.PDF | (1.058Mb) |
Abstract: | The present study consists of nine chapters including the introductory chapter. Chapter II makes a brief review of environmental literature and examines various measures adopted at the global level to protect the environment. The environmental problems often transgress national sovereignity and geographical boundaries. Therefore, attempts must be made at the national and international levels to protect the environment, the resources of which are the common property of mankind. The protection of the national environment from the ancient till the present forms the content of Chapter III. These chapters together provide a background to understand the issues analysed in the subsequent chapters. Carefully worked out theoretical framework is a pre-requisite for the successful study of a complex subject. Some of the theoretical issues of ‘environomics’ are examined in Chapter IV. The theoretical issues involved in estimating the costs and benefits of environmental protection constitute the theme of Chapter V. The state of environment in Eloor-Edayar Industrial belt andthe impact analysis of pollution of the area are discussed in Chapter VI and VII respectively. Chapter VIII makes the financial estimate of environmental protection of the project And finally, Chapter IX presents the findings of the study |
Description: | Department of Applied Economics, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3553 |
Files | Size |
---|---|
Dyuthi-T1521.pdf | (6.127Mb) |
Abstract: | An attempt has been made in this study to screen some fish muscle enzymes to assess their potential worth in testing the degree of freshness of fish. A problem with routine enzyme activity determinations is the complexity of the method of enzyme assay. Hence, in the present study as far as possible simple assay techniques were adopted. Several species were screened to assess the possibility of employing this procedure on a large scale. It is hoped that findings of this study will lead to the development of meaningful criteria in testing the freshness of fish. This thesis has been divided into five chapters |
Description: | Division of Marine Biology, Microbiology and Biochemistry, School of Marine Sciences, Cochin University ofScience and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3590 |
Files | Size |
---|---|
Dyuthi-T1530.pdf | (4.119Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1220 |
Files | Size |
---|---|
Dhamodaran Namboodiri D 1988.PDF | (378.5Kb) |
Abstract: | A detailed study of the blends of ethylene-propylene-diene rubber (EPDM) and chlorobutyl rubber (CIIR) is proposed in this study. These blends may find application in the manufacture of curing diaphragms/curing envelopes for tire curing applications. EPDM possesses better physical properties such as high heat resistance, ozone resistance, cold and moisture resistance, high resistance to permanent defonnation, very good resistance to flex cracking and impact. Because of the low gas and moisture penneability, good weathering resistance and high thermal stability of CIIR, blends of EPDM with CIlR may be attractive, if sufficient mechanical strength can be developed. Although a lot of work has been done on elastomer blends, studies on the blends of EPDM and CIIR rubbers are meagre. Hence in this investigation it is proposed to make a systematic study on the characteristics of EPDM and CIIR rubber blends.The mechanical and physical properties of an elastomer blend depend mainly on the blend compatibility. So in the first part of the study, it is proposed to develop compatible blends of EPDM with CIIR. Various commercial grades of ethylenepropylene- diene rubber are proposed to be blended with a specific grade of chlorobutyl rubber at varying proportions. The extent of compatibility in these blends is proposed to be evaluated based on their mechanical properties such as tensile strength, tear strength and ageing resistance. In addition to the physical property measurements, blend compatibility is also proposed to be studied based on the glass transition behavlour of the blends in relation to the Tg's of the individual components using Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). The phase morphology of the blends is also proposed to be investigated by Scanning Electron Microscopy (SEM) studies of the tensile fracture surfaces. In the case of incompatible blends, the effect of addition of chlorosulfonated polyethylene as a compatibiliser is also proposed to be investigated.In the second part of the study, the effect of sulphur curing and resin curing on the curing behaviour and the vulcanizate properties of EPDM/CIIR blends are planned to be evaluated. Since the properties of rubber vulcanizates are determined by their network structures, it is proposed to determine the network structure of the vulcanizates by chemical probes so as to correlate it with the mechanical properties.In the third part of the work, the effect of partial precuring of one of the components prior to blending as a possible means of improving the properties of the blend is proposed to be investigated. This procedure may also help to bring down the viscosity mismatch between the constituent e1astomers and provide covulcanization of the blend.The rheological characteristics and processability of the blends are proposed to be investigated in the last part of the study. To explore their possible applications, the air permeability of the blend samples at varying temperatures is proposed to be measured. The thermal diffusivity behaviour of EPDM/CIlR blends is also proposed to be investigated using novel laser technique. The thermal diffusivity of the blends along with the thermal degradation resistance may help to determine whether the blends are suitable for high temperature applications such as in the manufacturing of curing envelope. |
Description: | Deparhnent of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2524 |
Files | Size |
---|---|
Dyuthi-T0683.pdf | (6.799Mb) |
Abstract: | This thesis is a study of -Equality of Opportunity in Public Employment : Judicial Perspectives on Backwardness. This study is an attempt to evaluate the concept of backwardness and equality of opportunity in employment and to assess the judicial perspectives in relation to them. The study reveals that the recent review petition of the Constitution Bench did not assess the decision of Chakradhar and its import. The study reveals that the Indian judiciary could successfully locate and apply the above principles. It was-Justice Subba Rao's nascent attempt in Devadasan which marked the starting point of such a jurisprudential enquiry. Later Thomas developed the thoughts by a reading new meaning and content to equality provisions of the Constitution which included the elimination of inequalities as the positive content of Articles 14 and 16(1) and elevated reservation provision to the same status of equality principles under the Constitution. Soshit, Vasanth Kumar and Mandal supplemented further to the jurisprudential contents. In this process, the courts were guided by the theories of John Rawls, David Miller, Ronald Dworkin, Max Weber and Roscoe Pound. Thus there was a slow and steady process of transformation of the reservation provision. From an anti-meritarian, unenforceable and enabling provision, it reached a stage of equally relevant and explanatory part of fundamental right to equality. Mandal viewed it as a part of sharing of State power. Though this can be seen by rereading and re-joining thoughts of judges in this regard, the judicial approach lacks coherence and concerted efforts in evolving a jurisprudential basis for protective discrimination. The deliberations of the framers of the Constitution reveals that there was much confusion and indeterminacy with regard to the concept of Backwardness. The study shows that the judiciary has been keeping intact the framers’ expectation of having a reasonable quantum of reservation, preventing the undeserved sections from enjoying the benefit, avoiding its abuse and evolving a new criteria and rejecting the old ones. |
Description: | School of Legal Studies, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3250 |
Files | Size |
---|---|
Dyuthi-T1224.pdf | (10.09Mb) |
Abstract: | Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.This dissertation contributes to an architecture oriented code validation, error localization and optimization technique assisting the embedded system designer in software debugging, to make it more effective at early detection of software bugs that are otherwise hard to detect, using the static analysis of machine codes. The focus of this work is to develop methods that automatically localize faults as well as optimize the code and thus improve the debugging process as well as quality of the code.Validation is done with the help of rules of inferences formulated for the target processor. The rules govern the occurrence of illegitimate/out of place instructions and code sequences for executing the computational and integrated peripheral functions. The stipulated rules are encoded in propositional logic formulae and their compliance is tested individually in all possible execution paths of the application programs. An incorrect sequence of machine code pattern is identified using slicing techniques on the control flow graph generated from the machine code.An algorithm to assist the compiler to eliminate the redundant bank switching codes and decide on optimum data allocation to banked memory resulting in minimum number of bank switching codes in embedded system software is proposed. A relation matrix and a state transition diagram formed for the active memory bank state transition corresponding to each bank selection instruction is used for the detection of redundant codes. Instances of code redundancy based on the stipulated rules for the target processor are identified.This validation and optimization tool can be integrated to the system development environment. It is a novel approach independent of compiler/assembler, applicable to a wide range of processors once appropriate rules are formulated. Program states are identified mainly with machine code pattern, which drastically reduces the state space creation contributing to an improved state-of-the-art model checking. Though the technique described is general, the implementation is architecture oriented, and hence the feasibility study is conducted on PIC16F87X microcontrollers. The proposed tool will be very useful in steering novices towards correct use of difficult microcontroller features in developing embedded systems. |
Description: | Department of Computer Science, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2996 |
Files | Size |
---|---|
Dyuthi-T0976.pdf | (3.390Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/5331 |
Files | Size |
---|---|
Dyuthi T-2367.pdf | (6.495Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.