Abstract: | Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.This dissertation contributes to an architecture oriented code validation, error localization and optimization technique assisting the embedded system designer in software debugging, to make it more effective at early detection of software bugs that are otherwise hard to detect, using the static analysis of machine codes. The focus of this work is to develop methods that automatically localize faults as well as optimize the code and thus improve the debugging process as well as quality of the code.Validation is done with the help of rules of inferences formulated for the target processor. The rules govern the occurrence of illegitimate/out of place instructions and code sequences for executing the computational and integrated peripheral functions. The stipulated rules are encoded in propositional logic formulae and their compliance is tested individually in all possible execution paths of the application programs. An incorrect sequence of machine code pattern is identified using slicing techniques on the control flow graph generated from the machine code.An algorithm to assist the compiler to eliminate the redundant bank switching codes and decide on optimum data allocation to banked memory resulting in minimum number of bank switching codes in embedded system software is proposed. A relation matrix and a state transition diagram formed for the active memory bank state transition corresponding to each bank selection instruction is used for the detection of redundant codes. Instances of code redundancy based on the stipulated rules for the target processor are identified.This validation and optimization tool can be integrated to the system development environment. It is a novel approach independent of compiler/assembler, applicable to a wide range of processors once appropriate rules are formulated. Program states are identified mainly with machine code pattern, which drastically reduces the state space creation contributing to an improved state-of-the-art model checking. Though the technique described is general, the implementation is architecture oriented, and hence the feasibility study is conducted on PIC16F87X microcontrollers. The proposed tool will be very useful in steering novices towards correct use of difficult microcontroller features in developing embedded systems. |
Description: | Department of Computer Science, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2996 |
Files | Size |
---|---|
Dyuthi-T0976.pdf | (3.390Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/5331 |
Files | Size |
---|---|
Dyuthi T-2367.pdf | (6.495Mb) |
Abstract: | A continuous cell line (SISK) from kidney of sea bass, Lates calcarifer, has been established and characterized. The cell line was maintained in Leibovitz' L-15 supplemented with 15% fetal bovine serum. This cell line has been subcultured more than 100 times over a period of 2 years. The SISK cell line consists of predominantly of epithelial-like cells. These cells showed strong positive for epithelial markers such as cytokeratin 19 and pancytokeratin. The cells were able to grow at temperature between 25 and 32 °C with optimum temperature of 28 °C. The growth rate of sea bass kidney cells increased as the FBS proportion increased from 2% to 20% at 28 °C with optimum growth at the concentrations of 15% or 20% FBS. The distribution of chromosome number was 30 to 56 with a modal peak at 48 chromosomes. Polymerase chain reaction products were obtained from SISK cells and tissues of sea bass with primer sets of microsatellite markers of sea bass. Five fish viruses were tested on this cell line to determine its susceptibility to these viruses and this was found to be susceptible to MABV NC1 and nodavirus, and the infection was confirmed by RT-PCR and CPE. This suggests that the SISK cell line has good potential for the isolation of various fish viruses. This cell line has been shown to be susceptible to bacterial extracellular products. The SISK cell line is the India's first marine fish cell line. |
Description: | Aquaculture 257 (2006) 92–103 |
URI: | http://dyuthi.cusat.ac.in/purl/4025 |
Files | Size |
---|---|
Establishment a ... ass (Lates calcarifer).pdf | (1.207Mb) |
Abstract: | Development of continuous shrimp cell lines for effective investigation on shrimp viruses remains elusive with an arduous history of over 25 years. Despite presenting challenges to researchers in developing a cell line, the billion dollar aquaculture industry is under viral threat. Advances in molecular biology and various gene transfer technologies for immortalization of cells have resulted in the development of hundreds of cell lines from insects and mammals, but yet not a single cell line has been developed from shrimp and other marine invertebrates. Though improved growth and longevity of shrimp cells in vitro could be achieved by using modified growth media this did not make any leap to spontaneous transformation; probably due to the fact that shrimp cells inhibited neoplastic transformations. Oncogenic induction and immortalization are considered as the possible ways, and an exclusive medium for shrimp cell culture and an appropriate mode of transformation are crucial. In this review status of shrimp cell line development and its future orientation are discussed |
Description: | Indian J. Virol. (July–September 2012) 23(2):244–251 DOI 10.1007/s13337-012-0089-9 |
URI: | http://dyuthi.cusat.ac.in/purl/4056 |
Files | Size |
---|---|
Establishment o ... eption and Orientation.pdf | (265.6Kb) |
Abstract: | This paper proposes different estimators for the parameters of SemiPareto and Pareto autoregressive minification processes The asymptotic properties of the estimators are established by showing that the SemiPareto process is α-mixing. Asymptotic variances of different moment and maximum likelihood estimators are compared. |
URI: | http://dyuthi.cusat.ac.in/xmlui/purl/2107 |
Files | Size |
---|---|
ESTIMATION FOR THE SEMIPARETO PROCESSES.pdf | (587.3Kb) |
URI: | http://dyuthi.cusat.ac.in/purl/5528 |
Files | Size |
---|---|
Dyuthi T-2571.pdf | (17.78Mb) |
Abstract: | Urbanization refers to the process in which an increasing proportion of a population lives in cities and suburbs. Urbanization fuels the alteration of the Land use/Land cover pattern of the region including increase in built-up area, leading to imperviousness of the ground surface. With increasing urbanization and population pressures; the impervious areas in the cities are increasing fast. An impervious surface refers to an anthropogenic ally modified surface that prevents water from infiltrating into the soil. Surface imperviousness mapping is important for the studies related to water cycling, water quality, soil erosion, flood water drainage, non-point source pollution, urban heat island effect and urban hydrology. The present study estimates the Total Impervious Area (TIA) of the city of Kochi using high resolution satellite image (LISS IV, 5m. resolution). Additionally the study maps the Effective Impervious Area (EIA) by coupling the capabilities of GIS and Remote Sensing. Land use/Land cover map of the study area was prepared from the LISS IV image acquired for the year 2012. The classes were merged to prepare a map showing pervious and impervious area. Supervised Maximum Likelihood Classification (Supervised MLC),which is a simple but accurate method for image classification, is used in calculating TIA and an overall classification accuracy of 86.33% was obtained. Water bodies are 100% pervious, whereas urban built up area are 100% impervious. Further based on percentage of imperviousness, the Total Impervious Area is categorized into various classes |
Description: | Research Journal of Recent Sciences, Vol. 2(ISC-2012), 241-244 (2013) |
URI: | http://dyuthi.cusat.ac.in/purl/4647 |
Files | Size |
---|---|
Estimation of E ... using Satellite Images.pdf | (402.9Kb) |
Abstract: | Spent substrate, the residual material of mushroom cultivation, causes disposal problems for cultivators. Currently the spent substrate of different mushrooms is used mainly for composting. Edible mushrooms of Pleurotus sp. can grow on a wide range of lignocellulosic substrates. In the present study, Pleurotus eous was grown on paddy straw and the spent substrate was used for the production of ethanol. Lignocellulosic biomass cannot be saccharified by enzymes to high yield of ethanol without pretreatment. The root cause for the recalcitrance of lignocellulosic biomass such as paddy straw is the presence of lignin and hemicelluloses on the surface of cellulose. They form a barrier and prevent cellulase from accessing the cellulose in the substrate. In the untreated paddy straw, the amount of hemicelluloses and lignin (in % dry weight) were 20.30 and 20.34 respectively and the total reducing sugar was estimated to be 5.40 mg/g. Extracellular xylanase and ligninases of P. eous could reduce the amount of hemicelluloses and lignin to 16 and 11(% dry weight) respectively, by 21st day of cultivation. Growth of mushroom brought a seven fold increase in the total reducing sugar yield (39.20 mg/g) and six fold increase in the production of ethanol (6.48 g/L) after 48hrs of fermentation, when compared to untreated paddy straw |
Description: | International Journal of Applied Biology and Pharmaceutical Technology,vol 3,issue 1:jan-mar 2012 |
URI: | http://dyuthi.cusat.ac.in/purl/4730 |
Files | Size |
---|---|
Ethanol Product ... rate Of Pleurotus Eous.pdf | (273.3Kb) |
Abstract: | The towed array electronics is essentially a multichannel real time data acquisition system. The major challenges involved in it are the simultaneous acquisition of data from multiple channels, telemetry of the data over tow cable (several kilometres in some systems) and synchronization with the onboard receiver for accurate reconstruction. A serial protocol is best suited to transmit the data to onboard electronics since number of wires inside the tow cable is limited. The best transmission medium for data over large distances is the optical fibre. In this a two step approach towards the realization of a reliable telemetry scheme for the sensor data using standard protocols is described. The two schemes are discussed in this paper. The first scheme is for conversion of parallel, time-multiplexed multi-sensor data to Ethernet. Existing towed arrays can be upgraded to ethernet using this scheme. Here the last lap of the transmission is by Ethernet over Fibre. For the next generation of towed arrays it is required to digitize and convert the data to ethernet close to the sensor. This is the second scheme. At the heart of this design is the Analog-to-Ethernet node. In addition to a more reliable interface, this helps in easier fault detection and firmware updates in the field for the towed arrays. The design challenges and considerations for incorporating a network of embedded devices within the array are highlighted |
Description: | Ocean Electronics (SYMPOL), 2009 International Symposium on |
URI: | http://dyuthi.cusat.ac.in/purl/4495 |
Files | Size |
---|---|
Ethernet Telemetry for Towed Arrays.pdf | (798.5Kb) |
Abstract: | In the present study, an attempt has been made to prepare composites by incorporating expanded graphite fillers in insulating elastomer matrices and to study its DC electrical conductivity, dielectric properties and electromagnetic shielding characteristics, in addition to evaluating the mechanical properties. Recently, electronic devices and components have been rapidly developing and advancing. Thus, with increased usage of electronic devices, electromagnetic waves generated by electronic systems can potentially create serious problems such as malfunctions of medical apparatus and industry robots and can even cause harm to the human body. Therefore, in this work the applicable utility of the prepared composites as electromagnetic interference (EMI) shielding material are also investigated. The dissertation includes nine chapters |
Description: | Department of Polymer Science and Rubber Technology,Cochin University Of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3416 |
Files | Size |
---|---|
Dyuthi T1410.pdf | (7.205Mb) |
Abstract: | The effect of frequency, composition and temperature on the a.c. electrical conductivity were studied for the ceramic, Ni1–xZnxFe2O4, as well as the filler (Ni1–xZnxFe2O4) incorporated rubber ferrite composites (RFCs). Ni1–xZnxFe2O4 (where x varies from 0 to 1 in steps of 0×2) were prepared by usual ceramic techniques. They were then incorporated into a butyl rubber matrix according to a specific recipe. The a.c. electrical conductivity (sa.c.) calculations were carried out by using the data available from dielectric measurements and by employing a simple relationship. The a.c. conductivity values were found to be of the order of 10–3 S/m. Analysis of the results shows that sa.c. increases with increase of frequency and the change is same for both ceramic Ni1–xZnxFe2O4 and RFCs. sa.c. increases initially with the increase of zinc content and then decreases with increase of zinc. Same behaviour is observed for RFCs too. The dependence of sa.c. on the volume fraction of the magnetic filler was also studied and it was found that the a.c. conductivity of RFCs increases with increase of volume fraction of the magnetic filler. Temperature dependence of conductivity was studied for both ceramic and rubber ferrite composites. Conductivity shows a linear dependence with temperature in the case of ceramic samples |
Description: | Bull. Mater. Sci., Vol. 25, No. 7, December 2002, pp. 599–607 |
URI: | http://dyuthi.cusat.ac.in/purl/4355 |
Files | Size |
---|---|
Evaluation of a ... ielectric measurements.pdf | (232.7Kb) |
Abstract: | In this paper the effectiveness of a novel method of computer assisted pedicle screw insertion was studied using testing of hypothesis procedure with a sample size of 48. Pattern recognition based on geometric features of markers on the drill has been performed on real time optical video obtained from orthogonally placed CCD cameras. The study reveals the exactness of the calculated position of the drill using navigation based on CT image of the vertebra and real time optical video of the drill. The significance value is 0.424 at 95% confidence level which indicates good precision with a standard mean error of only 0.00724. The virtual vision method is less hazardous to both patient and the surgeon |
Description: | International Journal of Scientific and Research Publications, Volume 4, Issue 2, February 2014 |
URI: | http://dyuthi.cusat.ac.in/purl/4577 |
Files | Size |
---|---|
Evaluation Of A Novel Method Of........pdf | (516.8Kb) |
Description: | School of Management Studies, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2867 |
Files | Size |
---|---|
Dyuthi-T0864.pdf | (9.463Mb) |
Abstract: | The microalgae gained importance as food and feed as well as source of fine chemicals since the l960’s. Spirulina became the trend setter due to its easily culturable properties as well as nutritional composition. A rapid expansion of microalgal industry occurred in the Asia-Pacific region as microalgae came to stay as a health food supplement. Microalgae have been an integral component of oxidation ponds usually incorporated with wastewater treatment. Over the last few decades, efforts have been made to apply intensive microalgal cultures to perform biological tertiary treatment of secondary effluents. Given the limited number of species still available for commercial exploitation, it is imperative to isolate and cultivate those photosynthetic organisms with high growth rate and biomass accumulation, which could play the dual role of cleaning the wastewater and also providing useful biomass. This has been the objective of this study ie. 0 To develop pure cultures of local isolates of Cyanobacteria for extraction of biochemicals of commercial value 0 To couple biomass production with effluent treatment |
Description: | School of Environmental Studies, Cochin University of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3367 |
Files | Size |
---|---|
Dyuthi-T1344.pdf | (3.297Mb) |
Abstract: | The electrical conductivity and thermal diffusivity of pristine and iodine doped vanadyl naphthalocyanine (VONc) were studied. In the pristine sample, the temperature dependence was very weak below 300 K. The increase in conductivity at higher temperature must be due to an enhancement in carrier density with increase in thermal energy. The electrical conductivity of VONc increased when doped with iodine. The behavior of VONcI indicated that considerable changes have occurred in the electronic environment of the molecule as a result of doping. Iodine doping enhanced the thermal diffusivity of VONc. The increase in thermal diffusivity of the iodine doped sample may be due to the disorder of iodine atoms occupying the channels in one dimensional lattices. |
URI: | http://dyuthi.cusat.ac.in/purl/2387 |
Files | Size |
---|---|
Dyuthi-P0210.pdf | (49.04Kb) |
Abstract: | Aquaculture is one of the prime catalysts for the socio-economic development of Indian economy contributing to the nations food and nutritional security, export earnings, income and employment generation. In this study an evaluation of extension activities in the development of aquaculture in Kerala. This study was conducted with a view to examine how the Kerala fisheries department offered extension services to the aquaculture farmers in the freshwater and brackish water sectors of the state through various agencies like Fish Farmers Development Agency(FFDA), Brackish water Fish Farmers Development Agency (BFFDA). In this study there are 3 category of respondent’s fresh water beneficiary farmers, brackish water beneficiary farmers and fisheries extension officers. The main motive of the thesis is to make an attempt to explore the responses of local producers to the extension programs of the state with special reference to the aquaculture sector of Kerala, India. The most important technical constraint faced by the fresh water farmers was lack of knowledge followed by non-availability of quality seeds. In the case of brackish water farming, it was infection of disease followed by lack of knowledge. The overall activities of the department of fisheries were ‘fairly good’. It indicate the need for improvements in the delivery of extension services to various target groups. The state fisheries department has already moving towards evolving these modes of extension activities by community participation. |
URI: | http://dyuthi.cusat.ac.in/purl/933 |
Files | Size |
---|---|
Dyuthi-T0072.pdf | (3.164Mb) |
Abstract: | The acoustic signals generated in solids due to interaction with pulsed laser beam is used to determine the ablation threshold of bulk polymer samples of teflon (polytetrafluoroethylene) and nylon under the irradiation from a Q-switched Nd:YAG laser at 1.06µm wavelength. A suitably designed piezoelectric transducer is employed for the detection of photoacoustic (PA) signals generated in this process. It has been observed that an abrupt increase in the amplitude of the PA signal occurs at the ablation threshold. Also there exist distinct values for the threshold corresponding to different mechanisms operative in producing damages like surface morphology, bond breaking and melting processes at different laser energy densities. |
URI: | http://dyuthi.cusat.ac.in/purl/2501 |
Files | Size |
---|---|
Dyuthi-P0292.pdf | (706.9Kb) |
Abstract: | In the present study the preparation and characterisation of rubber ferrite composites (RFC) containing barium ferrite (BaF) and strontium ferrite (SrF) have been dealt with. The incorporation of the hard ferrites into natural and nitrile rubber was carried out according to a specific recipe for various loadings of magnetic fillers. For this, the ferrite materials namely barium ferrite and strontium ferrite having the general formula MO6Fe2O3 have been prepared by the conventional ceramic techniques. After characterisation they were incorporated into the natural and nitrile rubber matrix by mechanical method. Carbon black was also incorporated at different loading into the rubber ferrite composites to study its effect on various properties. The cure characteristics, mechanical, dielectric and magnetic properties of these composites were evaluated. The ac electrical conductivity of both the ceramic ferrites and rubber ferrite composites were also calculated using a simple relation. The investigations revealed that the rubber ferrite composites with the required dielectric and magnetic properties can be obtained by the incorporation of ferrite fillers into the rubber matrix, without compromising much on the processability and mechanical properties. |
Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2338 |
Files | Size |
---|---|
Dyuthi-T0612.pdf | (5.013Mb) |
Abstract: | The thesis entitled An Evaluation of Primary Health Care System in Kerala. The present study is intended to examine the working of primary health care system and its impact on the health status of people. The hypothesis tested in the thesis includes, a. The changes in the health profile require reallocation of resources of primary health care system, b. Rate of utilization depends on the quality of services provided by primary health centers, and c. There is a significant decline in the operational efficiency of the primary health care system. The major elements of primary health care stated in the report of AlmaAta International Conference on Primary Health Care (WHO, 1994)” is studied on the basis of the classification of the elements in to three: Preventive, Promotive, and Curative measures. Preventive measures include Maternal and Child Health Care including family Planning. Provision of water and sanitation is reviewed under promotive measures. Curative measures are studied using the disease profile of the study area. Collection of primary data was done through a sample survey, using pre-tested interview schedule of households of the study area. Multi stage random sampling design was used for selecting the sample. The design of the present study is both descriptive and analytical in nature. As far as the analytical tools are concerned, growth index, percentages, ratios, rates, time series analysis, analysis of variance, chi square test, Z test were used for analyzing the data. Present study revealed that no one in these areas was covered under any type of health insurance. Conclusion states that considering the present changes in the health profile, traditional pattern of resource allocation should be altered to meet the urgent health care needs of the people. Preventive and promotive measures like health education for giving awareness among people to change health habits, diet pattern, life style etc. are to be developed. Proper diagnosis and treatment of the disease at the beginning of the stage itself may help to cure majority of disease. For that, Public health policy must ensure the primary health care as enunciated at Alma- Ata international Conference. At the same time Public health is not to be treated as the sole responsibility of the government. Active community participation is an essential means to attain the goals. |
Description: | School of Management Studies, Cochin University of Science and Technology, |
URI: | http://dyuthi.cusat.ac.in/purl/3246 |
Files | Size |
---|---|
Dyuthi-T1220.pdf | (7.873Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.