Gum and filled compounds of styrene-butadiene rubber are extruded
through a laboratory extruder by varying the feeding rase at different temperatures
and screw speed (rpm). The extruded compounds are vulcanized
up4o their optimum cure times and the mechanical properties of the vulcanizates
are determined. From the properties data obtained it Is concluded that
there is a specific feeding rate wit in the starved fed region, which results In
maximum Improved mechanical properties . The enhancement In properties
is found to be due to better thermal and shear homogeneity.
Rani, Joseph(Hitthig & Wepf Verlag, Basel, October 13, 1986)
[+]
[-]
Abstract:
A carbon black filled 50/50 natural rubber (NR)/styrene-butadiene rubber (SBR)
blend is vulcanized using several conventional curing systems designed by varying the
amounts of sulphur and accelerator. The cure characteristics and the properties of the
vulcanizates are compared. The quantity and quality of crosslinks in each case are
evaluated by chemical probes to correlate them with the properties.
Rani, Joseph(John Wiley & Sons,Inc., December 29, 1997)
[+]
[-]
Abstract:
ABSTRACT: The electrical conductivity of silicone rubber vulcanizates containing carbon
blacks [e.g., acetylene black, lamp black, and ISAF (N-234) black] were investigated.
The change in electrical conductivity with varying amounts of carbon blacks and the
temperature dependence was measured. The mechanical properties like tensile
strength, tear strength, elongation at break, hardness, etc., of the vulcanizates were
determined. A comparative study of the electrical conductivity of the composites revealed
that the electrical conductivity of the composites made with acetylene black was
higher than that of the composites made of other blacks.
Carbon Black is incorporated In natural rubber latex in , the presence of
polyethylene glycol. The dispersion of carbon blade in the vulcanizatea is
analyzed using polaroid M.4 land camera The mechanical properties of the
carbon black meeterbatched NR/SBR blend Is compared with that of conventional
NR/SBR blend before and after ageing , The resilience, flex resistance
and hardness are found to be superior for N-LCMISBR compounds.
The compression set and abrasion resistance are comparable for both types
of blends . The processebiity and die swell of these blends at different shear
rates are also compared.
Paraphenylenediamine and diphenylamine were chemically
attached to natural rubber during mastication . The rubber bound antioxidants
were characterized by TLC, 'H-NMR, IR and TGA. The efficiency and
permenance of these bound antioxidants were compared with a conventional
amine type antioxidant in filled natural rubber vulcanizates . The rubber
bound antioxidants were found to be less volatile and less extractable as compared
to conventional antioxidants. The vulcanizates showed improved ageing
resistance as compared to vulcanizates containing conventional antioxidants.
This semisolid rubber bound antioxidant can reduce the amount of plasticizer
required for compounding.
Rani, Joseph(Elsevier Science Limited, July 3, 1994)
[+]
[-]
Abstract:
Diphenylamine was chemically attached to depolymerised natural rubber by
photochemical reaction. The rubber-bound diphenylamine was characterised
by TLC, HNMR, IR and TGA. The efficiency and permanence of the bound
diphenylamine was compared with conventional amine type antioxidant in
natural rubber vulcanizates. The rubber-bound diphenylamine was found to be
less volatile and less extractable compared to the conventional antioxidant.
The vulcanizates showed improved ageing resistance in comparison to vulcanizates
containing conventional antioxidant . Also, the presence of liquid
rubber-bound diphenylamine reduces the amount of plasticiser required for
compounding.
Para-phenylenediamine (PD) was chemically attached to depolymerized natural rubber by
a photochemical reaction . The rubber bound PD was characterized by TLC, 1H-NMR, IR,
and TGA. The efficiency and permanence of the bound PD were compared with conventional
antioxidants in NBR vulcanizates . The rubber bound PD was found to be less volatile and
more resistant to water and oil extraction . The vulcanizates showed improved aging resistance
in comparison to vulcanizates containing conventional antioxidants. The liquid rubber
bound antioxidant reduces the amount of plasticizer required for compounding
Studies conducted on butadiene-acrylonitrile copolymer (NBR)/poly(vinyl chloride) (PVC)
blends at different temperatures indicate that an optimum temperature exists for the formation
of a particular blend. The mechanical properties of the blends confirm this observation.
PVC stabilizer based on, magnesium oxide , zinc oxide, and stearic acid was found to be very
useful in NBR/PVC blends.
Rani, Joseph(Huthig & Wepf Verlag, Basel, June 5, 1991)
[+]
[-]
Abstract:
Antioxidants were attached to hydroxy-terminated liquid natural rubber by modified
Friedel-Crafts alkylation reaction using anhydrous zinc chloride as catalyst. The rubber
bound antioxidants were found to be less volatile and less extractable compared to
conventional antioxidants. The bound antioxidants were tried both in latex compounds
and dry rubber compounds. The vulcanizates showed improved ageing resistance
compared to vulcanizates based on conventional antioxidants.
Rani, Joseph(John Wiley & Sons,Inc., July 31, 1998)
[+]
[-]
Abstract:
ABSTRACT: Nylon tire cord (1680/2) was dipped in different adhesives based on resorcinol
formaldehyde resin and latex (RFL) and was bonded to natural rubber-based
compounds. The resin-rubber ratio in the RFL adhesive was optimized. The variation
of pull-through load was studied by varying the drying and curing temperature of the
dipped nylon tire cord. RFL adhesive based on vinylpyridine latex was found to have
better rubber-to-nylon tire cord bonding, compared with the one based on natural
rubber latex. Addition of a formaldehyde donor into the RFL adhesive/rubber compound
improves adhesion.
In natural rubber/high styrene resin microcellular sheets, part of
natural rubber was replaced by latex reclaim prepared from waste
latex products. The mechanical properties and cell structure of
the products were evaluated. It was found that latex reclaim can
replace about 30% of natural rubber without affecting the technical
properties of the microcellular sheets.
Rani, Joseph(Gordon and Breach Science Publishers, Inc., November 13, 1986)
[+]
[-]
Abstract:
A carbon black filled 50/50 Natural Rubber (NR)/Polybutadiene Rubber (BR) blend
is vulcanized using several conventional systems designed by varying the amounts of
sulphur and accelerator . The cure characteristics and the vulcanizate properties are
compared. The quality and quantity of crosslinks in each case are deciphered by
chemical probes to correlate them with the vulcanizate properties.
Blends of 50/50 natural rubber (NR) and styrene-butadiene rubber (SBR) are vulcanized using
several conventional and semi-EV systems. The cure characteristics and vulcanizate properties
are compared. The quantity and quality of crosslinks in each case are deciphered by chemical
probes to correlate them with the vulcanizate properties.
Rani, Joseph(Gordon and Breach Science Publishers, Inc., August 30, 1985)
[+]
[-]
Abstract:
Blends of natural rubber (NR) with styrene-butadiene rubber (SBR), polybutadiene
rubber (BR), ethylene-propylene terpolymer (EPDM) and acrylonitrile-butadiene
rubber (NBR) were vulcanised using an efficient vulcanisation (EV) system and a
semi-EV system. Compatible blends show a definite pattern of curing whereas the
incompatible blends show no such pattern.
Rani, Joseph(Wiley Inter Science, December 14, 2005)
[+]
[-]
Abstract:
Polypyrrole/poly (vinyl chloride) semi-interpenenzrtirtg
networks of different compositions are prepared using anunonitun per
sulfate initiator at room temperature in pellet.form and lilrrt form and
their dielectric properties are studied at different microwave frequencies.
An HP 8510 Vector network analyzer interfaced with a computer
is used. The cavity-perturbation technique is employed for the
study
Rani, Joseph(Wiley Periodicals, Inc., October 23, 2003)
[+]
[-]
Abstract:
Poly(o-toluidine) (PoT) and poly(o-toluidine
co aniline) were prepared by using ammonium persulfate
initiator, in the presence of 1M HCI. It was dried under
different conditions: room temperature drying (48 h), oven
drying (at 50°C for 12 h), or vacuum drying (under vacuum,
at room temperature for 16 h). The dielectric properties, such
as dielectric loss, conductivity, dielectric constant, dielectric
heating coefficient, loss tangent, etc., were studied at microwave frequencies. A cavity perturbation technique was used
for the study. The dielectric properties were found to be
related to the frequency and drying conditions. Also, the
copolymer showed better properties compared to PoT alone.
Rani, Joseph(John Wiley & Sons, Inc., November 8, 2000)
[+]
[-]
Abstract:
ABSTRACT: The dipping characteristics of radiation-vulcanized natural rubber latex
and natural rubber latex compounds were investigated with a lab-model semiautomatic
dipping machine. The effect of the variation of the speed of immersion and withdrawal,
dwell time, compound viscosity, and concentration of coagulant on the thickness of the
latex deposit was investigated. The results of the study show that the deposit thickness
depends on the withdrawal speed of the former, the concentration of the coagulant,
dwell times, and the viscosity of the latex compounds
Latex waste products contain rubber hydrocarbon of very high
quality, which is only lightly cross linked. Selected wastes such as thread waste
and glove waste were modified into processable materials by a novel economic
process and thermoplastic elastomers were prepared by blending these modified
waste materials with high density polyethylene in various proportions. The
mechanical properties as well as the rheological behaviour of these blends were
evaluated and compared with those of the natural rubber-high density
polyethylene blends.
Latex waste like glove waste was effectively modified using a new reclaiming
agent, thiocarbanilide. This modified waste was blended with linear low-density
polyethylene (LLDPE) to develop a novel thermoplastic elastomer. Both uncrosslinked
and dynamically crosslinked blends were prepared and their properties
were studied. The results were found to be comparable to those of conventional
thermoplastic elastomers.
Zinc butyl xanthate [Zn(bxt)2] was prepared
in the laboratory . The effect of this xanthate with zinc
diethyl dithiocarbamate (ZDC) on the vulcanization of natural
rubber ( NR), polybutadiene rubber (BR), and NR/BR
blend has been studied at different temperatures. The
amounts of Zn (bxt)2 and ZDC in the compounds were optimized
by varying the amount of ZDC from 0 . 75 to 1.5 phr
and Zn (bxt)2 from 0 . 75 to 1 .5 phr. The cure characteristics
were also studied . HAF filled NR, BR, and NR / BR blend
compounds were cured at different temperatures from 60 to
150 C. The sheets were molded and properties such as tensile strength, tear strength, crosslink density and elongation
at break, compression set, abrasion resistance, etc. were
evaluated. The results show that the mechanical properties
of 80NR/20BR blends are closer to that of NR vulcanizates,
properties of 60NR/40BR blends are closer to BR vulcanizates,
while the 70NR/30BR blends show an intermediate
property.