Sunil,K Narayanankutty(Taylor & Francis, November 13, 2000)
[+]
[-]
Abstract:
Cure characteristics and mechanical properties of short nylon fiber reinforced
acrylonitrile butadiene rubber-reclaimed rubber composites were studied. Minimum
torque, (maximum-minimum) torque and cure rate increased with fiber
concentration. Scorch time and cure time decreased by the addition of fibers.
Properties like tensile strength, tear strength, elongation at break, abrasion loss
and heat build up were studied in both orientations of fibers. Tensile and tear
properties were enhanced by the addition of fibers and were higher in the longitudinal
direction. Heat build up increased with fiber concentration and were
higher in the longitudinal direction. Abrasion resistance was improved in presence
of short fibers and was higher in the longitudinal direction. Resilience increased
on the introduction of fibers. Compression set was higher for blends.
The rheological behavior of a short-polyester-fiber-filled polyurethane
elastomer composite containing different bonding agents
has been studied in the temperature range 120-160°C and in the
shear rate range 63-608 s-'. The composite with and without
bonding agents showed a pseudoplastic behavior which decreased
with the increase of temperature. Composites containing bonding
agents based on polypropyleneglycol and 4,4'-diphenylmethanediisocyanate
showed the lowest viscosity values at a particular
shear rate, whereas composites containing a glycerol- (GL) based
bonding agent showed the highest viscosity. The viscosity of the
composite decreased sharply after a particular temperature (140°C) and the fall was less drastic in the composite containing
a GL-based bonding agent.