URI: | http://dyuthi.cusat.ac.in/purl/5453 |
Files | Size |
---|---|
Dyuthi T-2494.pdf | (7.246Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/576 |
Files | Size |
---|---|
Sudha Balasubramanian and C S P(1997)sept.PDF | (4.635Mb) |
Abstract: | A comparat ive study of the effect oflaser in inducing chro mosomal aberrat ions at 4gg nm was done in View j aba L. (faba bean) and Allium ccpa L. (onion) with Argon ion laser (Spectra Physics Model 171). Seeds and bulbs of V.jaba and A. eepa were subjected to laser irra diation by 4gg nm excitations from Argon ion laser source at power levels 200 and 400 mW with power densities 2.25 mW em" and 4.49 mW em" and ditTerent exposure times (10, 20, 30 & 40 minutes). Similar to the effect of oth er physical and chemical mutagens, laser caused a dose dependent decrease in mitotic index and a rise in mitotic aberrations when compared to the control. In both plant species, mutations were observed in all stages of mitotic cell cycle. The total percentage of aberrations was two fold higher at 400 mW than at 200 mW exposure. |
Description: | GENETICS and BREEDING Volume 28 Number3-4 pp. 27-33, 1996/1997 |
URI: | http://dyuthi.cusat.ac.in/purl/4728 |
Files | Size |
---|---|
Induction of mi ... L. and Allium cepa L..pdf | (3.037Mb) |
Abstract: | Laser irradiation at wavelength 514 nm was used to study the effect, of lasers in inducing chromosomal aberrations at mitosis. This study offers a new radiation system which could be used for the induction of mutations. Results are compared with those obtained from studies using y-rays as irradiation source. |
URI: | http://dyuthi.cusat.ac.in/purl/2463 |
Files | Size |
---|---|
Dyuthi-CPG75.pdf | (10.32Mb) |
Abstract: | It examine the aspects of Madhya Pradesh’s industrial structure which throw light on the development, viability and the efficiency of not only the over all industrial sector but also some of the selected industries of the state. The major objectives of are to examine the nature and characteristics of economic backwardness in Madhya Pradesh in an inter-state comparative framework and to analyse the pace and pattern of industrial growth in Madhya Pradesh against the backdrop of liberalization. To explore the industrial structure of Madhya Pradesh using the major structural ratios and industry mix. This study has underlined some structural as well as region specific constraints to the accelerated growth of the manufacturing industry in Madhya Pradesh. The industrial structure of Madhya Pradesh is concentrated and lop-sided. This is evidenced by the dominancy of single industry, basic metal and alloys. A diversified industrial structure is essential for promoting interdependent growth of the manufacturing industry based on the inter-industry linkages and agglomeration. The thesis gives a broad spectrum of regional disparities in development and evidence for Madhya Pradesh’s backwardness also portrayed and reflects the changing industrial structure of the state. |
URI: | http://dyuthi.cusat.ac.in/purl/772 |
Files | Size |
---|---|
Dyuthi-T0122.pdf | (3.492Mb) |
Abstract: | This study proposes to verify the hypothesis relating to labour legislation in the industrial sector.Here there are as many as fifty enacments of the central government alone.These legislations indicating the growth of this branch of law over a period of more than half a centuary cover a wide spectrum of interests of workers both individuals and collective in different areas of employment.However this study relates mainly to a)trade unions act,b)industrial employment c)industrial disputes. |
Description: | Department Of Applied Economics Cochin University Of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3845 |
Files | Size |
---|---|
Dyuthi-T1776.pdf | (6.802Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1321 |
Files | Size |
---|---|
Vincent Panikulangara 1983.PDF | (533.3Kb) |
Abstract: | Time-series measurements from a moored data buoy located in the Bay of Bengal captured signals of inertial oscillation forced by the September 1997 cyclone. The progressive vector diagram showed mean northeastward current with well-defined clockwise circulation. Spectral analysis exhibited inertial peak at 0.67 cpd with blue shift and high rotary coefficient of –0.99, which signifies strong circular inertial oscillation. The wind and SST also exhibited spectral peak at inertial band (0.69 cpd) with higher blue shift. The inertial amplitude of 148.8 cm/s corresponding to a wind stress of 0.99 N/m2 and spectral peak near the local inertial frequency (0.653 cpd) indicate that the transfer of momentum was high. |
URI: | http://dyuthi.cusat.ac.in/xmlui/purl/2063 |
Files | Size |
---|---|
Inertial oscillation forced by the ....pdf | (177.5Kb) |
URI: | http://dyuthi.cusat.ac.in/purl/5605 |
Files | Size |
---|---|
Dyuthi T-2646.pdf | (17.67Mb) |
Abstract: | The increase in traffic growth and maintenance expenditures demands the urgent need for building better, long-lasting, and more efficient roads preventing or minimizing bituminous pavement distresses. Many of the principal distresses in pavements initiate or increase in severity due to the presence of water. In Kerala highways, where traditional dense graded mixtures are used for the surface courses, major distress is due to moisture induced damages. The Stone Matrix Asphalt (SMA) mixtures provide a durable surface course. Proven field performance of test track at Delhi recommends Stone Matrix Asphalt as a right choice to sustain severe climatic and heavy traffic conditions. But the concept of SMA in India is not so popularized and its application is very limited mainly due to the lack of proper specifications. This research is an attempt to study the influence of additives on the characteristics of SMA mixtures and to propose an ideal surface course for the pavements. The additives used for this investigation are coir, sisal, banana fibres (natural fibres), waste plastics (waste material) and polypropylene (polymer). A preliminary investigation is conducted to characterize the materials used in this study. Marshall test is conducted for optimizing the SMA mixtures (Control mixture-without additives and Stabilized mixtures with additives). Indirect tensile strength tests, compression strength tests, triaxial strength tests and drain down sensitivity tests are conducted to study the engineering properties of stabilized mixtures. The comparison of the performance of all stabilized mixtures with the control mixture and among themselves are carried out. A statistical analysis (SPSS package Ver.16) is performed to establish the findings of this study |
Description: | School of Engineering, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3257 |
Files | Size |
---|---|
Dyuthi-T1231.pdf | (3.992Mb) |
Abstract: | In Kerala highways, where traditional dense graded mixtures are used for the surface courses, major distress is due to moisture induced damages. Development of stabilized Stone Matrix Asphalt (SMA) mixtures for improved pavement performance has been the focus of research all over the world for the past few decades. Many successful attempts are made to stabilize SMA mixtures with synthetic fibres and polymers. India, being an agricultural economy produces fairly huge quantity of natural fibres such as coconut, sisal, banana, sugar cane, jute etc.. Now- a -days the disposal of waste plastics is a major concern for an eco- friendly sustainable environment. This paper focuses on the influence of additives like coir, sisal, banana fibres (natural fibres), waste plastics (waste material) and polypropylene (polymer) on the drain down characteristics of SMA mixtures. A preliminary investigation is conducted to characterize the materials used in this study. Drain down sensitivity tests are conducted to study the bleeding phenomena and drain down of SMA mixtures. Based on the drain down characteristics of the various stabilized mixtures it is inferred that the optimum fibre content is 0.3% by weight of mixture for all fibre mixtures irrespective of the type of fibre. For waste plastics and polypropylene stabilized SMA mixtures, the optimum additive contents are respectively 7% and 5% by weight of mixture. Due to the absorptive nature of fibres, fibre stabilizers are found to be more effective in reducing the drain down of the SMA mixture. The drain values for the waste plastics mix is within the required specification range. The coir fibre additive is the best among the fibres investigated. Sisal and banana fibre mixtures showed almost the same characteristics on stabilization. |
Description: | International Journal of Research in Engineering and Technology Volume: 03 Issue: 07 | Jul-2014 |
URI: | http://dyuthi.cusat.ac.in/purl/4309 |
Files | Size |
---|---|
Influence Of Ad ... atrix Asphalt Mixtures.pdf | (426.3Kb) |
Abstract: | The effect of ambient gas on the dynamics of the plasma generated by laser ablation of a carbon target using 1.06 μm radiation from a Q-switched Nd:YAG laser has been investigated using a spectroscopic technique. The emission characteristics of the carbon plasma produced in argon, helium and air atmospheres are found to depend strongly on the nature and pressure of the surrounding gas. It has been observed that hotter and denser plasmas are formed in an argon atmosphere rather than in helium or air as an ambient. |
URI: | http://dyuthi.cusat.ac.in/purl/2388 |
Files | Size |
---|---|
Dyuthi-P0207.pdf | (678.2Kb) |
Abstract: | The thesis presented here unveils an experimental study of the hydrodynamic characteristics of swirling fluidized bed viz. pressure drop across the distributor and the bed, minimum fluidizing velocity, bed behaviour and angle of air injection. In swirling fluidized bed the air is admitted to the bed at an angle 'Ѳ' to the horizontal. The vertical component of the velocity v sin Ѳ causes fluidization and the horizontal component v cos Ѳ contributes to swirl motion of the bed material.The study was conducted using spherical particles having sizes 3.2 mm, 5.5 mm & 7.4 mm as the bed materials. Each of these particles was made from high density polyethylene, nylon and acetal having relative densities of 0.93, 1.05 and 1.47 respectively.The experiments were conducted using conidour type distributors having four rows of slits. Altogether four distributors having angles of air injection (Φ)- 0°, 5°, 10° & 15° were designed and fabricated for the study. The total number of slits in each distributor was 144. The area of opening was 6220 mm2 making the percentage area of opening to 9.17. But the percentage useful area of opening of the distributor was 96.The experiments on the variation of distributor pressure drop with superficial velocity revealed that the distributor pressure drop decreases with angle of air injection. Investigations related to bed hydrodynamics were conducted using 2.5 kg of bed material. The bed pressure drop measurements were made along the radial direction of the distributor at distances of 60 mm, 90 mm, 120 mm & 150 mm from the centre of the distributor. It was noticed that after attaining minimum fluidizing velocity, the bed pressure drop increases along the radial direction of the distributor. But at a radial distance of 90 mm from the distributor centre, after attaining minimum fluidizing velocity the bed pressure drop remains almost constant. It was also observed that the bed pressure drop varies inversely with particle size as well as particle density.An attempt was made to determine the effect of various parameters on minimum fluidizing velocity. It was noticed that the minimum fluidizing velocity varies directly with angle of air injection (Φ), particle size and particle density.The study on the bed behaviour showed that the superficial velocity required for initiating various bed phenomena (such as swirl motion and separation of particles from the cone at the centre) increase with increase in particle size as well as particle density. It was also observed that the particle size and particle density directly influence the superficial velocity required for various regimes of bed behaviour such as linear variation of bed pressure drop, constant bed pressure drop and sudden increase or decrease in bed pressure drop.Experiments were also performed to study the effect of angle of air injection (Φ). It was noticed that the bed pressure drop decreases with angle of air injection. It was also noticed that the angle of air injection directly influence the superficial velocity required for initiating various bed phenomena as well as the various regimes of bed behaviour. |
Description: | Division of Mechanical Engineering, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2626 |
Files | Size |
---|---|
Dyuthi-T0705.pdf | (9.679Mb) |
Abstract: | Contamination of environmental water by pathogenic microorganisms and subsequent infections originated from such sources during different contact and non- contact recreational activities are a major public health problem worldwide particularly in developing countries. The main pathogen frequently associated with enteric infection in developing countries are Salmonella enterica serovar typhi and paratyphi. Although the natural habitat of Salmonella is the gastrointestinal tract of animals, it find its way into natural water through faecal contamination and are frequently identified from various aquatic environments (Baudart et al., 2000; Dionisio et al., 2000; Martinez -Urtaza et al., 2004., Abhirosh et al., 2008). Typhoid fever caused by S. enterica serotype typhi and paratyphi are a common infectious disease occurring in all the parts of the world with its highest endemicity in certain parts of Asia, Africa, Latin America and in the Indian subcontinent with an estimated incidence of 33 million cases each year with significant morbidity and mortality (Threlfall, 2002). In most cases the disease is transmitted by polluted water (Girard et al., 2006) because of the poor hygienic conditions, inadequate clean water supplies and sewage treatment facilities. However in developed countries the disease is mainly associated with food (Bell et al., 2002) especially shellfish (Heinitz et al., 2000 |
URI: | http://dyuthi.cusat.ac.in/purl/3926 |
Files | Size |
---|---|
Effect of salt ... bhirosh and Hatha 2013.pdf | (856.4Kb) |
Abstract: | Objectives of the present study are to find out the proximate composition of 20 commercially important tropical fish species on the west coast of India. To determine the collagen content in these commercially important fish species and fractionation of collagen into acid soluble collagen (ASC) and hot water soluble (insoluble) collagen (ISC). To classify fishes according to its collagen content and To study the different storage characteristics in the mince based product—surimi, from different species of fishes. The researcher tries to find out a suitable collagen source to incorporate in surimi. and studies the different storage qualities in the mince based product, surimi at different levels of collagen in different species of fishes. The optimum collagen level to get desirable texture and storage quality for mince based product. The researcher aims to develop some products from surimi with desirable level of collagen. And compare the products prepared from surimi of lesser collagen content fish containing desirable level of collagen with surimi prepared with high collagen content fish without collagen. This study gains in importance as there is littleinformation on the collagen content of different species of fishes in India. So far no attempt was made to classify fishes according to its collagen content. |
Description: | School of Industrial Fisheries, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3211 |
Files | Size |
---|---|
Dyuthi-T1185.pdf | (8.078Mb) |
Abstract: | Condoms are widely accepted as a contraceptive for family planning and population control. It is also accepted as the most effective barrier against sexually transmitted diseases, especially AIDS, the incurable disease. But presence of pinholes and low film strength of condoms make it unsuitable for the purpose. Quality improvement of condoms by reducing the pinhole formation and increasing the film strength is thus an essential requirement for population control as well as for preventing the spread of sexually transmitted diseases. Strict implementation of WHO specification of condoms further increases the rejection percentage. This causes higher rejection loss to condom manufacturers because the defects could be identified only at the final stage of processing. If the influence of various factors which cause these defects is known, manufacturers can take remedial measures to reduce the defectives so that rejection loss can be decreased and quality of condoms increased. In the present study, it was proposed to conduct experiments to improve the quality of condoms by reducing the pinhole rejection percentage and increasing the tensile properties, burst volume, and burst pressure. Ageing property improvement also was an important target among other parameters. Until a cure for AIDS is found, a high quality latex condom is the only effective device in the prevention of the spread of HIV, AIDS and STD's. Hence it is all the more necessary to have high quality condoms. |
Description: | Rubber Research Institute of India, |
URI: | http://dyuthi.cusat.ac.in/purl/3375 |
Files | Size |
---|---|
Dyuthi-T1352.pdf | (2.709Mb) |
Abstract: | Preparatiun or aci cular maghemi te containing dopan ls li ke Mg. i and Gd and their characleris,llion us ing different analytica l techniques have been reported. These in vestigat ions reveal that the addition of dopants li ke Mg. Ni and Gd modifies the magnetic properties without cfrecting any structural changes. The opt ical bandgaps of these doped compositions have ,li S() hecn determ ined. Evidence is ,li so av,li lab le from spectroscopic investi gations suggest ing thalmaghcllli te prepared vi,l the ()xa l,ltc precursor route does nm exhi bit a hydrogen fe rrite structure |
Description: | Ind ian Joum,ll of Pure & Applied Phys ics Vol. 37. November 1999. pr. 842-847 |
URI: | http://dyuthi.cusat.ac.in/purl/4435 |
Files | Size |
---|---|
Influence of do ... roperties of maghemite.pdf | (1.171Mb) |
Abstract: | HINDI |
Description: | Departmnt of Hindi,CUSAT |
URI: | http://dyuthi.cusat.ac.in/purl/4863 |
Files | Size |
---|---|
Dyuthi-T1961.pdf | (8.710Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1283 |
Files | Size |
---|---|
Shanmughan M 1982.PDF | (90.21Kb) |
Abstract: | Production Planning and Control (PPC) systems have grown and changed because of the developments in planning tools and models as well as the use of computers and information systems in this area. Though so much is available in research journals, practice of PPC is lagging behind and does not use much from published research. The practices of PPC in SMEs lag behind because of many reasons, which need to be explored. This research work deals with the effect of identified variables such as forecasting, planning and control methods adopted, demographics of the key person, standardization practices followed, effect of training, learning and IT usage on firm performance. A model and framework has been developed based on literature. Empirical testing of the model has been done after collecting data using a questionnaire schedule administered among the selected respondents from Small and Medium Enterprises (SMEs) in India. Final data included 382 responses. Hypotheses linking SME performance with the use of forecasting, planning and controlling were formed and tested. Exploratory factor analysis was used for data reduction and for identifying the factor structure. High and low performing firms were classified using a Logistic Regression model. A confirmatory factor analysis was used to study the structural relationship between firm performance and dependent variables. |
URI: | http://dyuthi.cusat.ac.in/purl/5105 |
Files | Size |
---|---|
Dyuthi-T 2171.pdf | (2.649Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.