| dc.contributor.author |
Sunil,K Narayanankutty |
|
| dc.date.accessioned |
2008-09-08T06:20:08Z |
|
| dc.date.available |
2008-09-08T06:20:08Z |
|
| dc.date.issued |
1992-02-27 |
|
| dc.identifier.other |
Plastics, Rubber and Composites Processing and Applications 19 (1993) 105-110, |
|
| dc.identifier.uri |
http://dyuthi.cusat.ac.in/purl/881 |
|
| dc.description.abstract |
The effect of various processing parameters, such as nip gap, friction ratio
and roll temperature, on the tensile properties of short Kevlar aramid
fibre-thermoplastic polyurethane composite has been investigated and the tensile
and tear fracture surfaces have been characterised using a scanning electron microscope.
A nip gap of 0.45 mm, a friction ratio of 1.15 and a roll temperature of 62°C
was found to give optimum mechanical properties. Scanning electron microscopy
study revealed a higher extent of fibre orientation in the milling direction in the
above condition. |
en_US |
| dc.language.iso |
en |
en_US |
| dc.subject |
nip gap |
en_US |
| dc.subject |
friction ratio |
en_US |
| dc.subject |
roll temperature |
en_US |
| dc.subject |
tensile properties |
en_US |
| dc.subject |
Kevlar aramid fibre-thermoplastic polyurethane composite |
en_US |
| dc.subject |
polyurethane composite |
en_US |
| dc.title |
Effect of processing parameters on the mechanical properties of short Kevlar aramid fibre-thermoplastic polyurethane composite |
en_US |
| dc.type |
Working Paper |
en_US |