Rani, Joseph(HUthig & Wepf Verlag Basel, December 12, 1986)
[+]
[-]
Abstract:
Blends of polychloroprene rubber and plasticized polyvinylchloride have been prepared
in various compositions and their properties evaluated. The properties of the
blends show that they can be used to replace polychloroprene in many applications
Rani, Joseph(Wiley lnterScience, September 4, 2006)
[+]
[-]
Abstract:
The latex industry has expanded over the
years to meet the world demands for gloves, condoms,
latex thread etc. Because of the strict specifications for
the products and the unstable nature of the latex, as
high as 15%, of the final latex products are rejected.
Since waste latex rubber (WLR) represents a source of
high quality rubber hydrocarbon, it is a potential candidate
for generating reclaimed rubber of superior quality.
Two types of WLR with different amounts of polysulfidic
bridges are used in these experiments, which are
reclaimed with variation of the concentration of the
reclaiming agents, the reclamation temperature and time,
Di phenyldisultide, 2-aminophenyldisulfide and 2,2'-dibenzamidodiphenyldisulfide
(DBADPDS) are used as reclaiming
agents, and the effect of diphenyldisulfides (DPDS)
with different substituents, on the reclamation efficiency of WLR is investigated. A kinetic study of the reclamation
reaction with the three reclaiming agents is done.
The reaction rates and activation energies are calculated
and compared with literature values. The comparative
study of the three different reclaiming agents shows that
(DBADPDS) is able to break the crosslinks at temperature
levels 20'C below the temperature levels normally
used with DPDS. Another advantage of this reclaiming
agent is the reduced smell during the reclamation process
and of the final reclaims, one of the most important
shortcomings of other disulfides used for this purpose.
Rani, Joseph(Wiley InterScience, December 13, 2004)
[+]
[-]
Abstract:
Prevulcanized natural rubber latex was prepared
by the heating of the latex compound at 55°C for
different periods of time (2, 4, 6, 8, and 10 h). The changes in
the colloidal stability and physical properties were evaluated
during the course of prevulcanization. The prevulcanized
latex compounds were stored for 300 days, and the
properties were monitored at different storage intervals (0,
20, 40, 60, 120, 180, 240, and 300 days). During prevulcanization,
the mechanical stability time increased, and the viscosity
remained almost constant. The tensile strength increased
during storage for a period of 20 days. The degree of
crosslinking, modulus, elongation at break, and chloroform
number were varied with the time of storage.
A series of short-isora-fiber-reinforced natural
rubber composites were prepared by the incorporation of
fibers of different lengths (6, 10, and 14 mm) at 15 phr loading
and at different concentrations (10, 20, 30, and 40 phr) with a
10 mm fiber length. Mixes were also prepared with 10 mm
long fibers treated with a 5% NaOH solution. The vulcanization
parameters, processability, and stress-strain properties
of these composites were analyzed. Properties such as tensile
strength, tear strength, and tensile modulus were found to be
at maximum for composites containing longitudinally oriented
fibers 10 mm in length. Mixes containing fiber loadings of 30 phr with bonding agent (resorcinol-formaldehyde [RF]
resin) showed mechanical properties superior to all other
composites. Scanning electron microscopy (SEM) studies
were carried out to investigate the fiber surface morphology,
fiber pullout, and fiber-rubber interface. SEM studies showed
that the bonding between the fiber and rubber was improved
with treated fibers and with the use of bonding agent.
Rani, Joseph(Wiley lnterScience, February 12, 2006)
[+]
[-]
Abstract:
It is observed that reclamation of natural rubber
latex based rubber using 2,2'-dibenzamidodiphenvldisulphide
as reclaiming agent is an optional methodology for
recycling of waste latex rubber (WLR). For progressive replacement
of virgin natural rubber by the reclaim, two alternatives
curing system were investigated: adjustment or reduction of
the curing system with increasing reclaim content, to compensate
for the extra amount of curatives brought along by the reclaim.
For fixed curing system, as if the reclaim were equivalent
to virgin NR. The cure behavior, final crosslink density
and distribution, mechanical properties, and dynamic
viscoelastic properties of the blends with reclaimed WLR are
measured and compared with the virgin compound. The morphology of the blends, sulfur migration, and final distribution
are analyzed.The mechanical and dynamic viscoelastic
properties deteriorate for both curing systems, but to a lesser
extent for fixed curing system compared to adjusted curing
system. With the fixed cure system, many properties like tensile
strength and compression set do still deteriorate, but tan 6
and Mrrr„/Murxr, representative for the rolling resistance of tires
are improved. On the other hand, with the adjusted cure system
both mechanical and dynamic properties still deteriorate.
Rani, Joseph(Huthig & Wepf Verlag,Basel, April 16, 1993)
[+]
[-]
Abstract:
Scrap latex products contain rubber hydrocarbon of very high quality, that is only
slightly crosslinked. A novel economic technique for converting such latex waste into
a processible material is developed. This paper reports the effect of adding this latex
reclaim to natural rubber. It is shown that latex reclaim can replace raw natural rubber
up to about 50 wt.% without affecting mechanical properties.