ABSTRACT: Linseed oil is used in the dual roles of the plasticizer and the fatty
acid component of the activator in nitrile rubber vulcanizates. The study shows
that the substitution can substantially improve the mechanical properties in
addition to other advantages such as increased cure rate, reduced leachability
and reduced compound cost.
Zinc salts of ethyl, isopropyl, and butyl xanthates are prepared
in the laboratory, and the effect of these xanthates with zinc diethyl
dithiocarbamate (ZDC) on the vulcanization of HAF-filled nitrile butadiene
rubber (NBR) compounds has been studied at different temperatures. The cure
times of these compounds have been compared with that of NBR compounds
containing TMTD/MBTS. The rubber compounds with the three xanthate
accelerators and ZDC are cured at various temperatures from 60 to 150°C.
The sheets are molded and properties such as tensile strength, tear strength,
cross-link density, elongation at break, compression set, abrasion resistance,
flex resistance, etc. have been evaluated. The properties show that zinc salt
of the xanthate/ZDC accelerator system has a positive synergistic effect on the
cure rate and mechanical properties of NBR compounds.
Zinc salts of ethyl, isopropyl, and butyl xanthates
were prepared in the laboratory. The effect of these
xanthates in combination with zinc diethyldithiocarbamate
(ZDC) on the vulcanization of silica-filled NBR compounds
has been studied at different temperatures. The cure times
of these compounds were compared with that of NBR compounds
containing tetramethylthiuram disulphide/dibenzthiazyl
disulphide. The rubber compounds with the xanthates
and ZDC were cured at various temperatures from
60 to 150°C. The sheets were molded and properties such as tensile strength, tear strength, crosslink density, elongation
at break, compression set, abrasion resistance, flex resistance,
heat buildup, etc. were evaluated. The properties
showed that zinc salt of xanthate/ZDC combination has a
positive synergistic effect on the cure rate and mechanical
properties of NBR compounds.
Rani, Joseph(OPA (Overseas Publishers Association), May 28, 1995)
[+]
[-]
Abstract:
Amine Terminated Liquid Natural Rubber (ATNR) was used as a plasticiser in filled NR and NBR
compounds replacing oil/DOP. The scorch time and cure time were found to be lowered when ATNR
was used as the plasticiser. ATNR was found to improve the mechanical properties like tensile strength,
tear strength and modulus of the vulcanizates . The ageing resistance of the vulcanizates containing ATNR
was superior compared to the vulcanizates containing oil/DOP.