Ethylene-propylene-diene rubber (EPDM) and isobutylene-isoprene rubber (IIR) were
compounded, precured to a low degree, and then were blended with natural rubber (NR).
The compounding ingredients for NR were then added and the final curing was done. NR/
EPDM and NR/IIR blends, prepared using this method, were found to possess much
improved mechanical properties as compared to their conventional counterparts. The optimum
precuring crosslink density that has to be given to the EPDM and IIR phases has
been determined.
Rani, Joseph(Gordon and Breach Science Publishers, Inc., November 28, 1986)
[+]
[-]
Abstract:
Polymer-solvent interaction parameters for the blends of natural rubber (NR) with
styrene-butadiene rubber (SBR) and polybutadiene rubber ( BR) are calculated using
the Flory-Rehner equation by equating the network density of the vulcanizates in
two solvents.
Blends of 50/50 natural rubber (NR) and styrene-butadiene rubber (SBR) are vulcanized using
several conventional and semi-EV systems. The cure characteristics and vulcanizate properties
are compared. The quantity and quality of crosslinks in each case are deciphered by chemical
probes to correlate them with the vulcanizate properties.
Rani, Joseph(Gordon and Breach Science Publishers, Inc., August 30, 1985)
[+]
[-]
Abstract:
Blends of natural rubber (NR) with styrene-butadiene rubber (SBR), polybutadiene
rubber (BR), ethylene-propylene terpolymer (EPDM) and acrylonitrile-butadiene
rubber (NBR) were vulcanised using an efficient vulcanisation (EV) system and a
semi-EV system. Compatible blends show a definite pattern of curing whereas the
incompatible blends show no such pattern.