Sony, George; Ajai, Kumar; Singh, R K; Nampoori, V P N(American Institute of Physics, 2009)
[+]
[-]
Abstract:
The dynamics of plasma plume, formed by the laser-blow-off of multicomponent LiF-C thin film
under various ambient pressures ranging from high vacuum to argon pressure of 3 Torr, has been
studied using fast imaging technique. In vacuum, the plume has ellipsoidal shape. With the increase
in the ambient pressure, sharp plume boundary is developed showing a focusing-like confinement
in the lateral space behavior in the front end, which persists for long times. At higher ambient
pressure (> 10−1 Torr ), structures are developed in the plasma plume due to hydrodynamic
instability/turbulences.
Radhakrishnan, P; Nampoori, V P N; Vallabhan, C P G(Indian Journal of Physics, 1992)
[+]
[-]
Abstract:
A simple fiber optic concentration sensor based on the coupling of light f rom one
fiber to another through a solution is discussed. The operational characteristics of the sensor are
illustrated by taking the solutions of potassium permanganate and fast green dye as samples.The extrinsic type sensor described here shows linearity at lower concentrations.
Nampoori, V P N; Radhakrishnan, P; Girijavallabhan, C P; Shelly John, M(Measurement Science and Technology, UK, November 12, 1998)
[+]
[-]
Abstract:
A novel sensing technique for the in situ monitoring of the rate of pulsed laser
deposition (PLD) of metal thin films has been developed. This optical fibre based sensor
works on the principle of the evanescent wave penetration of waveguide modes into the
uncladded portion of a multimode fibre. The utility of this optical fibre sensor is
demonstrated in the case of PLD of silver thin films obtained by a Q-switched Nd:YAG laser
which is used to irradiate a silver target at the required conditions for the preparation of thin
films. This paper describes the performance and characteristics of the sensor and shows how
the device can be used as an effective tool for the monitoring of the deposition rate of silver
thin films. The fibre optic sensor is very simple, inexpensive and highly sensitive compared
with existing techniques for thin film deposition rate measurements.
Kailasnath, M; Sreejaya, T S; Rajesh, Kumar; Vallabhan, C P G; Nampoori, V P N; Radhakrishnan, P(Elsevier, 2008)
[+]
[-]
Abstract:
Preparation of an appropriate optical-fiber preform is vital for the fabrication of graded-index polymer optical fibers (GIPOF), which are considered to be a good choice for providing inexpensive high bandwidth data links, for local area networks and telecommunication applications. Recent development of the interfacial gel polymerization technique has caused a dramatic reduction in the total attenuation in GIPOF, and this is one of the potential methods to prepare fiber preforms for the fabrication of dye-doped polymer-fiber amplifiers. In this paper, the preparation of a dye-doped graded-index poly(methyl methacrylate) (PMMA) rod by the interfacial gel polymerization method using a PMMA tube is reported. An organic compound of high-refractive index, viz., diphenyl phthalate (DPP), was used to obtain a graded-index distribution, and Rhodamine B (Rh B), was used to dope the PMMA rod. The refractive index profile of the rod was measured using an interferometric technique and the index exponent was estimated. The single pass gain of the rod was measured at a pump wavelength of 532 nm. The extent of doping of the Rh B in the preform was studied by axially exciting a thin slice of the rod with white light and measuring the spatial variation of the fluorescence intensity across the sample.
Sudha Kartha, C; Ramachandran, T; Nampoori, V P N; Sathianandan, K(Solid State Communications, 1986)
[+]
[-]
Abstract:
Variations in the decay times of the characteristic green emissions at 522.7, 551.3, 549.6, 547.6, 542.2, 540.2, 535.9 and 533.5nm from
CaF2 :H03+ with concentration are studied at RT and LNT. A pulsed N2
laser beam of power density 1.5 MW cm-2 is used for the excitation.
Temperature dependent concentration quenching of the decay times are
observed for all the emission bands. But an increase in the decay time due
to the reabsorption process is also observed for a few of the above bands.
Thomas, Baby; Nampoori, V P N(Solid State Communications, 1992)
[+]
[-]
Abstract:
A method of preparation of strontium sulphide phosphors doped
with europium is given. Nitrogen laser excited fluorescence emission
spectra of these phosphors in the visible region are recorded. A band
with line structure in the region 350-430 nm and a new broad band at
460 nm are observed. The splitting pattern for the 6p levels of Eu 2+ are
given.
Sasi Kumar, P R; Ambadi, B; Nampoori, V P N; Vallabhan, C P G(Springer, February , 1993)
[+]
[-]
Abstract:
Doppler limited high resolution spectrum in the wavelength region 17224 to 17236 cm−1 of the first positive system (B 3Π g −A 3Σ u + ) of the N2 molecule is recorded by optogalvanic spectroscopic technique using a single mode ring dye laser. It is observed that the intensity and line width of the rotational line increase with the discharge current. Dependence of the collision broadening coefficient on the current was also evaluated.
Artificial neural networks (ANNs) are relatively new computational tools that have found extensive utilization in solving many complex real-world problems. This paper describes how an ANN can be used to identify the spectral lines of elements. The spectral lines of Cadmium (Cd), Calcium (Ca), Iron (Fe), Lithium (Li), Mercury (Hg), Potassium (K) and Strontium (Sr) in the visible range are chosen for the investigation. One of the unique features of this technique is that it uses the whole spectrum in the visible range instead of individual spectral lines. The spectrum of a sample taken with a spectrometer contains both original peaks and spurious peaks. It is a tedious task to identify these peaks to determine the elements present in the sample. ANNs capability of retrieving original data from noisy spectrum is also explored in this paper. The importance of the need of sufficient data for training ANNs to get accurate results is also emphasized. Two networks are examined: one trained in all spectral lines and other with the persistent lines only. The network trained in all spectral lines is found to be superior in analyzing the spectrum even in a noisy environment.
Pratap, R; Nampoori, V P N; Lalaja, Varghese(International Journal of Neuroscience, 1988)
[+]
[-]
Abstract:
It is shown that the invariant integral, viz., the Kolmogorov second entropy, is eminently suited to characterize EEG quantitatively. The estimation obtained for a "clinically normal" brain is compared with a previous result obtained from the EEG of a person under epileptic seizure.
Nampoori, V P N; Radhakrishnan, P; Girijavallabhan, C P; Geetha, K; Rajesh, M(Journal of Optics A: Pure and Applied Optics, Institute of Physics Publishing, January 13, 2006)
[+]
[-]
Abstract:
We present a compact solid-state laser based on leaky mode propagation
from a dye-doped polymer free-standing film waveguide. The edge emitted
spectrum clearly indicated the existence of periodic resonant modes. The
reflections from the lateral faces of the free-standing film provided the
optical feedback thus giving rise to a Fabry–Perot like optical cavity. This
together with the guidance through the gain medium gave rise to intense
narrow emission lines. For a pump energy of 1.82 mJ/pulse, an intense line
with FWHM ∼0.4 nmwas observed at 576.5 nm.
Santhi Ani, Joseph; Gaurav, Sharma; Misha, Hari; Mathew, S; Radhakrishnan, P; Nampoori, V P N(Optical Society of America, 2010)
[+]
[-]
Abstract:
We demonstrate the possibility of realizing, all-optical switching in gold nanosol. Two overlapping laser beams are used for this purpose, due to which a low-power beam passing collinear to a high-power beam will undergo cross phase modulation and thereby distort the spatial profile. This is taken to advantage for performing logic operations. We have also measured the threshold pump power to obtain a NOT gate and the minimum response time of the device. Contrary to the general notion that the response time of thermal effects used in this application is of the order of milliseconds, we prove that short pump pulses can result in fast switching. Different combinations of beam splitters and combiners will lead to the formation of other logic functions too.
Nampoori, V P N(Wiley Inter Science, March 27, 2007)
[+]
[-]
Abstract:
Optical fiber based laser induced fluorescence (LIF)
measurements were carried out using Rhodamine B to analyze
two different species of bacteria , a Gram-positive bacteria
namely Bacillus .cmithii , and fibrin alginolvticus, a Gram-'
negative bacteria . The fiber sensor was clearly able to distinguish
between the two species of bacteria . Quenching effect of the dye
Rhodamine B by Bacillus smitltii was observed . The effect of dye
on the samples was also studied in detail.
Reethamma, Thomas; Nampoori, V P N(Elsevier, 1990)
[+]
[-]
Abstract:
Fluorescence of BaS: Sm phosphor has been studied using a pulsed Nitrogen laser (337.1 nm) as the excitation source. The spectrum consists of a broad band in the region 540–660nm superposed by the characteristic Sm3+ lines. Energy level splitting pattern of Sm3+ due to crystal field effects has been calculated and relevent field parameters are evaluated. Analysis shows that Sm3+ takes up Ba2+ substitutional sites.
Nampoori, V P N; Radhakrishnan, P; Girijavallabhan, C P; Sajan, D George; Aji, A Anapara; K G K Warrier(Proceedings of SPIE, 2003)
[+]
[-]
Abstract:
In this paper, we report the measurements of thermal diffusivity of nano Ag metal dispersed ceramic alumina
matrix sintered at different temperatures using laser induced non-destructive photoacoustic technique. Measurements of
thermal diffusivity also have been carried out on specimens with various concentration of nano metal. Analysis of the
data is done on the basis of one-dimensional model of Rosencwaig and Gersho. The present measurements on the
thermal diffusivity of nano metal dispersed ceramic alumina shows that porosity has a great influence on the heat
transport and the thermal diffusivity value. The present analysis also shows that the inclusion of nano metal into
ceramic matrix increases its interconnectivity and hence the thermal diffusivity value. The present study on the samples
sintered at different temperature shows that the porosity of the ceramics varies considerably with the change in sintering
temperature. The results are interpreted in terms of phonon assisted heat transfer mechanism and the exclusion of pores
with the increase in sintering temperature
Bindhu, C V; Harilal, S S; Riju, C Issac; Geetha K, Varier; Nampoori, V P N; Vallabhan, C P G(World Scientific Publishing Company, 1995)
[+]
[-]
Abstract:
Measurement of thermal lensing signal as a function of laser power made in Rhodamine B solutions in methanol give clear evidence of two photon absorption process within certain concentration ranges when 488 nm Ar+ laser beam is used as the pump source. Only one photon process is found to occur when 514 nm and 476 nm beams are used as the pump.
Litty, Irimpan; Bindu, Krishnan; Nampoori, V P N; Radhakrishnan, P(Optical Society of America, August 20, 2008)
[+]
[-]
Abstract:
We present the spectral and nonlinear optical properties of ZnO-SiO2 nanocomposites prepared by colloidal chemical synthesis. Obvious enhancement of ultraviolet (UV) emission of the samples is observed, and the strongest UV emission of a typical ZnO-SiO2 nanocomposite is over three times stronger than that of pure ZnO. The nonlinearity of the silica colloid is low, and its nonlinear response can be improved by making composites with ZnO. These nanocomposites show self-defocusing nonlinearity and good nonlinear absorption behavior. The observed nonlinear absorption is explained through two photon absorption followed by weak free carrier absorption and nonlinear scattering. The nonlinear refractive index and the nonlinear absorption increase with increasing ZnO volume fraction and can be attributed to the enhancement of exciton oscillator strength. ZnO-SiO2 is a potential nanocomposite material for the UV light emission and for the development of nonlinear optical devices with a relatively small limiting threshold.
Moosad, K P B; Abdul Rasheed, T M; Nampoori, V P N; Sathianandan, K(Optical Society of America, 1990)
[+]
[-]
Abstract:
Low power optical phase conjugation in polyvinyl alcohol
films embedded with saturable dyes is reported. Phase
conjugate reflectivity achieved is higher than that obtained
in the case of similar gelatin films.
Nampoori, V P N; Litty, Irimpan; Bindu, Krishnan; Radhakrishnan, P(Elsevier Journal of Colloid and Interface Science, April 29, 2008)
[+]
[-]
Abstract:
In this article we present the spectral and nonlinear optical properties of ZnO–TiO2 nanocomposites prepared
by colloidal chemical synthesis. Emission peaks of ZnO–TiO2 nanocomposites change from 340 nm
to 385 nm almost in proportion to changes in Eg. The nanocomposites show self-defocusing nonlinearity
and good nonlinear absorption behaviour. The nonlinear refractive index and the nonlinear absorption
increase with increasing TiO2 volume fraction at 532 nm and can be attributed to the enhancement of
exciton oscillator strength. ZnO–TiO2 is a potential nanocomposite material for the tunable light emission
and for the development of nonlinear optical devices with a relatively small limiting threshold
Swapna, Nair S; Rajesh, S; Abraham, V S; Anantharaman, M R; Nampoori, V P N(Elsevier, 2006)
[+]
[-]
Abstract:
Fine magnetic particles (size≅100 Å) belonging to the series ZnxFe1−xFe2O4 were synthesized by cold co-precipitation methods and their structural properties were evaluated using X-ray diffraction. Magnetization studies have been carried out using vibrating sample magnetometry (VSM) showing near-zero loss loop characteristics. Ferrofluids were then prepared employing these fine magnetic powders using oleic acid as surfactant and kerosene as carrier liquid by modifying the usually reported synthesis technique in order to induce anisotropy and enhance the magneto-optical signals. Liquid thin films of these fluids were prepared and field-induced laser transmission through these films was studied. The transmitted light intensity decreases at the centre with applied magnetic field in a linear fashion when subjected to low magnetic fields and saturate at higher fields. This is in accordance with the saturation in cluster formation. The pattern exhibited by these films in the presence of different magnetic fields was observed with the help of a CCD camera and was recorded photographically.
Rajasree, K; Vidyalal, V; Radhakrishnan, P; Nampoori, V P N; Vallabhan, C P G(American Institute of Physics, August 1, 1993)
[+]
[-]
Abstract:
Laser‐induced damage and ablation thresholds of bulk superconducting samples of Bi2(SrCa)xCu3Oy(x=2, 2.2, 2.6, 2.8, 3) and Bi1.6 (Pb)xSr2Ca2Cu3 Oy (x=0, 0.1, 0.2, 0.3, 0.4) for irradiation with a 1.06 μm beam from a Nd‐YAG laser have been determined as a function of x by the pulsed photothermal deflection technique. The threshold values of power density for ablation as well as damage are found to increase with increasing values of x in both systems while in the Pb‐doped system the threshold values decrease above a specific value of x, coinciding with the point at which the Tc also begins to fall.