| Abstract: | Fully burnt rice hull (rice hull ash) was tried as a low cost filler in place of precipitated silica in NBR/PVC based microcellular soles. The mechanical properties of the soles containing silica and ash are found to be comparable. The expansion is marginally higher in the presence of ash, which permits to reduce the amount of blowing agent. Cell structure of microcellular sheets remains unchanged when silica is replaced by ash. |
| URI: | http://dyuthi.cusat.ac.in/purl/867 |
| Files | Size |
|---|---|
| R Srilathakutty ... ,Rice hull ash...,2002.PDF | (4.693Mb) |
| Abstract: | This paper presents the results of a study on the use of rice husk ash (RHA) for property modification of high density polyethylene (HDPE). Rice husk is a waste product of the rice processing industry. It is used widely as a fuel which results in large quantities of RHA. Here, the characterization of RHA has been done with the help of X-ray diffraction (XRD), Inductively Coupled Plasma Atomic Emission Spectroscopy (ICPAES), light scattering based particle size analysis, Fourier transform infrared spectroscopy (FTIR) and Scanning Electron Microscope (SEM). Most reports suggest that RHA when blended directly with polymers without polar groups does not improve the properties of the polymer substantially. In this study RHA is blended with HDPE in the presence of a compatibilizer. The compatibilized HDPE-RHA blend has a tensile strength about 18% higher than that of virgin HDPE. The elongation-at-break is also higher for the compatibilized blend. TGA studies reveal that uncompatibilized as well as compatibilized HDPERHA composites have excellent thermal stability. The results prove that RHA is a valuable reinforcing material for HDPE and the environmental pollution arising from RHA can be eliminated in a profitable way by this technique. |
| Description: | Materials and Design 41 (2012) 1–7 |
| URI: | http://dyuthi.cusat.ac.in/purl/4691 |
| Files | Size |
|---|---|
| Rice husk ash – ... h density polyethylene.pdf | (725.3Kb) |
| Abstract: | Water quality of rooftop-collected rainwater is an issue of increased interest particularly in developing countries where the collected water is used as a source of drinking water. Bacteriological and chemical parameters of 25 samples of rooftop-harvested rainwater stored in ferrocement tanks were analyzed in the study described in this article. Except for the pH and lower dissolved oxygen levels, all other physicochemical parameters were within World Health Organization guidelines. Bacteriological results revealed that the rooftop-harvested rainwater stored in tanks does not often meet the bacteriological quality standards prescribed for drinking water. Fifty percent of samples of harvested rainwater for rural and urban community use and 20% of the samples for individual household use showed the presence of E. coli. Fecal coliform/fecal streptococci ratios revealed nonhuman animal sources of fecal pollution. Risk assessment of bacterial isolates from the harvested rainwater showed high resistance to ampicillin, erythromycin, penicillin, and vancomycin. Multiple antibiotic resistance (MAR) indexing of the isolates and elucidation of the resistance patterns revealed that 73% of the isolates exhibited MAR |
| Description: | Journal of Environmental Health |
| URI: | http://dyuthi.cusat.ac.in/purl/3934 |
| Files | Size |
|---|---|
| Risk Assessment ... Central Kerala, India.pdf | (256.5Kb) |
| Abstract: | One of the major applications of underwater acoustic sensor networks (UWASN) is ocean environment monitoring. Employing data mules is an energy efficient way of data collection from the underwater sensor nodes in such a network. A data mule node such as an autonomous underwater vehicle (AUV) periodically visits the stationary nodes to download data. By conserving the power required for data transmission over long distances to a remote data sink, this approach extends the network life time. In this paper we propose a new MAC protocol to support a single mobile data mule node to collect the data sensed by the sensor nodes in periodic runs through the network. In this approach, the nodes need to perform only short distance, single hop transmission to the data mule. The protocol design discussed in this paper is motivated to support such an application. The proposed protocol is a hybrid protocol, which employs a combination of schedule based access among the stationary nodes along with handshake based access to support mobile data mules. The new protocol, RMAC-M is developed as an extension to the energy efficient MAC protocol R-MAC by extending the slot time of R-MAC to include a contention part for a hand shake based data transfer. The mobile node makes use of a beacon to signal its presence to all the nearby nodes, which can then hand-shake with the mobile node for data transfer. Simulation results show that the new protocol provides efficient support for a mobile data mule node while preserving the advantages of R-MAC such as energy efficiency and fairness. |
| Description: | PROCEEDINGS OF SYMPOL-2011 |
| URI: | http://dyuthi.cusat.ac.in/purl/4143 |
| Files | Size |
|---|---|
| RMAC-M Extendin ... mobile data mule node.pdf | (649.3Kb) |
| Abstract: | The recent trends envisage multi-standard architectures as a promising solution for the future wireless transceivers to attain higher system capacities and data rates. The computationally intensive decimation filter plays an important role in channel selection for multi-mode systems. An efficient reconfigurable implementation is a key to achieve low power consumption. To this end, this paper presents a dual-mode Residue Number System (RNS) based decimation filter which can be programmed for WCDMA and 802.16e standards. Decimation is done using multistage, multirate finite impulse response (FIR) filters. These FIR filters implemented in RNS domain offers high speed because of its carry free operation on smaller residues in parallel channels. Also, the FIR filters exhibit programmability to a selected standard by reconfiguring the hardware architecture. The total area is increased only by 24% to include WiMAX compared to a single mode WCDMA transceiver. In each mode, the unused parts of the overall architecture is powered down and bypassed to attain power saving. The performance of the proposed decimation filter in terms of critical path delay and area are tabulated. |
| Description: | Vehicular Technology Conference, 2008. VTC Spring 2008. IEEE |
| URI: | http://dyuthi.cusat.ac.in/purl/3869 |
| Files | Size |
|---|---|
| RNS based Programmable Multi-mode Decimation.pdf | (293.6Kb) |
| Abstract: | Effect of chlorine doping on the opto-electronic properties of β-In2S3 thin film, deposited by spray pyrolysis technique is studied for the first time. Chlorine was incorporated in the spray solution, using HCl. Pristine sample prepared using In(NO3)3 and thiourea as the precursors showed very low photosensitivity. But upon adding optimum quantity of chlorine, the photosensitivity increased by 3 orders. X-ray analysis revealed that crystallinity was also increasing up to this optimum level of Cl concentration. It was also observed that samples with high photosensitivity were having higher band gap. The present study proved that doping with chlorine was beneficial as this could result in forming crystalline and photosensitive films of indium sulfide. |
| Description: | Thin Solid Films 518 (2010) 1779–1783 |
| URI: | http://dyuthi.cusat.ac.in/purl/4711 |
| Files | Size |
|---|---|
| Role of chlorin ... of β-In2S3 thin films.pdf | (681.1Kb) |
| Abstract: | Commercial banks play a vital role in the economic development of a country like India. Indian economy in general and banking services in particular have made rapid strides in the recent past. However, a sizeable section of the population, particularly the vulnerable groups, such as weaker sections and low income groups, continue to remain excluded from even the most basic opportunities and services provided by the financial sector. To address the issue of such financial exclusion in a holistic manner, it is essential to ensure that a range of financial services is available to every individual |
| Description: | Journal of Business Management & Social Sciences Research (JBM&SSR),Volume 3, No.5, May 2014 |
| URI: | http://dyuthi.cusat.ac.in/purl/4651 |
| Files | Size |
|---|---|
| Role Of Commerc ... al Inclusion Programme.pdf | (123.6Kb) |
| Abstract: | Lower partial moments plays an important role in the analysis of risks and in income/poverty studies. In the present paper, we further investigate its importance in stochastic modeling and prove some characterization theorems arising out of it. We also identify its relationships with other important applied models such as weighted and equilibrium models. Finally, some applications of lower partial moments in poverty studies are also examined |
| Description: | METRON - International Journal of Statistics 2008, vol. LXVI, n. 2, pp. 223-242 |
| URI: | http://dyuthi.cusat.ac.in/purl/4282 |
| Files | Size |
|---|---|
| The role of low ... in stochastic modeling.pdf | (139.5Kb) |
| Abstract: | The paper identifies twelve elements of ship recycling and highlights their respective roles and duties in a proposed ship recycling system. The source and items of knowledgebase for ship recycling have been brought out. A new philosophy focusing clean and safe ship recycling namely design for ship recycling has been introduced based on principles such as ecofriendliness, engineering efficiency, energy conservation and ergonomics. The role of naval architects in ship recycling industry has been described based on the above factors. The paper brings out the role of naval architects in ship recycling the way it has been practiced worldwide and proposed by regulatory bodies. The authors have brought out the new concept of design for ship recycling and various aspects of it. The role of naval architects in the practice of this new design philosophy which is ready to be embraced by the maritime industry has been reiterated. |
| Description: | Journal of Shipping and Ocean Engineering 3 (2013) 47-54 |
| URI: | http://dyuthi.cusat.ac.in/purl/4679 |
| Files | Size |
|---|---|
| Role of Naval Architects in Ship Recycling.pdf | (68.01Kb) |
| Abstract: | The objective of this study is to understand the reasons for the enhancement in aerosol optical depth (AOD) over the Arabian Sea observed during June, July and August. During these months, high values of AOD are found over the sea beyond 10◦ N and adjacent regions. The Arabian Sea is bounded by the lands of Asia and Africa on its three sides. So the region is influenced by transported aerosols from the surroundings as well as aerosols of local origin (marine aerosols). During the summer monsoon season in India, strong surface winds with velocities around 15 m s−1 are experienced over most parts of the Arabian Sea. These winds are capable of increasing sea spray activity, thereby enhancing the production of marine aerosols. The strong winds increase the contribution of marine aerosols over the region to about 60% of the total aerosol content. The main components of marine aerosols include sea salt and sulphate particles. The remaining part of the aerosol particles comes from the western and northern land masses around the sea, of which the main component is transported dust particles. This transport is observed at higher altitudes starting from 600 m. At low levels, the transport occurs mainly from the Indian Ocean and the Arabian Sea itself, indicating the predominance of marine aerosols at these levels. The major portion of the total aerosol loading was contributed by coarse-mode particles during the period of study. But in the winter season, the concentration of coarse-mode aerosols is found to be less. From the analysis, it is concluded that the increase in marine aerosols and dust particles transported from nearby deserts results in an increase in aerosol content over the Arabian Sea during June, July and August. |
| Description: | International Journal of Remote Sensing Vol. 33, No. 16, 20 August 2012, 5105–5118 |
| URI: | http://dyuthi.cusat.ac.in/purl/3804 |
| Files | Size |
|---|---|
| SP.CAB_IJRS.pdf | (1.182Mb) |
| Abstract: | Indium monofluoride was excited in a high-frequency discharge and the C-X system was photographed at a reciprocal dispersion of 0.3 AA mm-1 using a plane-grating spectrograph. Rotational analyses of the 0,0 1,0 2,2 3,3 4,4 2,4 3,5 4,6 and 5,7 bands have been carried out and the following molecular constants have been evaluated. Be'=0.2670(+or-3) cm-1, Be"=0.2628(+or-4) cm-1, alpha e'=0.0050(+or-4) cm-1, alpha e"=0.0020(+or-1) cm-1, De'=3.65(+or-5)*10-7 cm-1, De"=2.5(+or-3)*10-7 cm-1, beta e'=0.5(+or-2)*10-7 cm-1, beta e"=0.2(+or-1)*10-7 cm-1, re'=1.9672(+or-3) AA, re"=1.9853(+or-2) AA. The re" value agrees with the microwave absorption value 1.9854 AA. |
| URI: | http://dyuthi.cusat.ac.in/purl/2619 |
| Files | Size |
|---|---|
| Dyuthi-P0180.pdf | (490.8Kb) |
| Abstract: | In wireless sensor networks, the routing algorithms currently available assume that the sensor nodes are stationary. Therefore when mobility modulation is applied to the wireless sensor networks, most of the current routing algorithms suffer from performance degradation. The path breaks in mobile wireless networks are due to the movement of mobile nodes, node failure, channel fading and shadowing. It is desirable to deal with dynamic topology changes with optimal effort in terms of resource and channel utilization. As the nodes in wireless sensor medium make use of wireless broadcast to communicate, it is possible to make use of neighboring node information to recover from path failure. Cooperation among the neighboring nodes plays an important role in the context of routing among the mobile nodes. This paper proposes an enhancement to an existing protocol for accommodating node mobility through neighboring node information while keeping the utilization of resources to a minimum. |
| URI: | http://dyuthi.cusat.ac.in/purl/4175 |
| Files | Size |
|---|---|
| Routing Protoco ... reless Sensor Networks.pdf | (246.2Kb) |
| Abstract: | In wireless sensor networks, the routing algorithms currently available assume that the sensor nodes are stationary. Therefore when mobility modulation is applied to the wireless sensor networks, most of the current routing algorithms suffer from performance degradation. The path breaks in mobile wireless networks are due to the movement of mobile nodes, node failure, channel fading and shadowing. It is desirable to deal with dynamic topology changes with optimal effort in terms of resource and channel utilization. As the nodes in wireless sensor medium make use of wireless broadcast to communicate, it is possible to make use of neighboring node information to recover from path failure. Cooperation among the neighboring nodes plays an important role in the context of routing among the mobile nodes. This paper proposes an enhancement to an existing protocol for accommodating node mobility through neighboring node information while keeping the utilization of resources to a minimum. |
| Description: | TENCON 2008-2008 IEEE Region 10 Conference |
| URI: | http://dyuthi.cusat.ac.in/purl/4136 |
| Files | Size |
|---|---|
| Routing Protoco ... reless Sensor Networks.pdf | (245.2Kb) |
| Abstract: | In wireless sensor networks, the routing algorithms currently available assume that the sensor nodes are stationary. Therefore when mobility modulation is applied to the wireless sensor networks, most of the current routing algorithms suffer from performance degradation. The path breaks in mobile wireless networks are due to the movement of mobile nodes, node failure, channel fading and shadowing. It is desirable to deal with dynamic topology changes with optimal effort in terms of resource and channel utilization. As the nodes in wireless sensor medium make use of wireless broadcast to communicate, it is possible to make use of neighboring node information to recover from path failure. Cooperation among the neighboring nodes plays an important role in the context of routing among the mobile nodes. This paper proposes an enhancement to an existing protocol for accommodating node mobility through neighboring node information while keeping the utilization of resources to a minimum. |
| Description: | TENCON 2008-2008 IEEE Region 10 Conference |
| URI: | http://dyuthi.cusat.ac.in/purl/3862 |
| Files | Size |
|---|---|
| Routing Protocol Enhancement for handling.pdf | (245.2Kb) |
| Abstract: | The modern telecommunication industry demands higher capacity networks with high data rate. Orthogonal frequency division multiplexing (OFDM) is a promising technique for high data rate wireless communications at reasonable complexity in wireless channels. OFDM has been adopted for many types of wireless systems like wireless local area networks such as IEEE 802.11a, and digital audio/video broadcasting (DAB/DVB). The proposed research focuses on a concatenated coding scheme that improve the performance of OFDM based wireless communications. It uses a Redundant Residue Number System (RRNS) code as the outer code and a convolutional code as the inner code. The bit error rate (BER) performances of the proposed system under different channel conditions are investigated. These include the effect of additive white Gaussian noise (AWGN), multipath delay spread, peak power clipping and frame start synchronization error. The simulation results show that the proposed RRNS-Convolutional concatenated coding (RCCC) scheme provides significant improvement in the system performance by exploiting the inherent properties of RRNS. |
| Description: | Networks, 2008. ICON 2008. 16th IEEE International Conference on |
| URI: | http://dyuthi.cusat.ac.in/purl/3878 |
| Files | Size |
|---|---|
| RRNS-Convolutio ... Wireless Communication.pdf | (714.9Kb) |
| Abstract: | ABSTRACT: Rubber seed oil was used as a multipurpose ingredient in natural rubber (NR) and styrene butadiene rubber (SBR) compounds. The study shows that the oil, when substituted for conventional plasticiser, imparts excellent mechanical properties to NR and SBR vulcanizates. Further, it also improves aging resistance, reduces cure time, increases abrasion resistance and flex resistance, and reduces blooming. |
| URI: | http://dyuthi.cusat.ac.in/purl/871 |
| Files | Size |
|---|---|
| V Nandanan and ... er seed oil...,Aug1998.PDF | (4.054Mb) |
| Abstract: | Rubber solutions were prepared and used for bonding wood pieces. The effect of the variation of chlorinated natural rubber (CNR) and phenolformaldehyde (PF) resin in the adhesive solutions on lap shear strength was determined. Natural rubber and neoprene-based adhesive solutions were compared for their lap shear strength. The storage stability of the adhesive prepared was determined. The change in lap shear strength before and after being placed in cold water, hot water, acid, and alkali was tested. The bonding character of these adhesives was compared with different commercially available solution adhesives. The room-temperature aging resistance of wood joints was also determined. In all the studies, the adhesive prepared in the laboratory was found to be superior compared to the commercial adhesives. |
| URI: | http://dyuthi.cusat.ac.in/purl/859 |
| Files | Size |
|---|---|
| Neetha John and ... er solution...,Oct1997.PDF | (3.485Mb) |
| Abstract: | Zeolite Y-encapsulated ruthenium(III) complexes of Schiff bases derived from 3-hydroxyquinoxaline-2-carboxaldehyde and 1,2- phenylenediamine, 2-aminophenol, or 2-aminobenzimidazole (RuYqpd, RuYqap and RuYqab, respectively) and the Schiff bases derived from salicylaldehyde and 1,2-phenylenediamine, 2-aminophenol, or 2-aminobenzimidazole (RuYsalpd, RuYsalap and RuYsalab, respectively) have been prepared and characterized. These complexes, except RuYqpd, catalyze catechol oxidation by H2O2 selectively to 1,2,4-trihydroxybenzene. RuYqpd is inactive. A comparative study of the initial rates and percentage conversion of the reaction was done in all cases. Turn over frequency of the catalysts was also calculated. The catalytic activity of the complexes is in the order RuYqap > RuYqab for quinoxaline-based complexes and RuYsalap > RuYsalpd > RuYsalab for salicylidene-based complexes. The reaction is believed to proceed through the formation of a Ru(V) species. |
| URI: | http://dyuthi.cusat.ac.in/purl/1652 |
| Files | Size |
|---|---|
| pearly j mol.pdf | (181.9Kb) |
| Abstract: | Embedded systems, especially Wireless Sensor Nodes are highly prone to Type Safety and Memory Safety issues. Contiki, a prominent Operating System in the domain is even more affected by the problem since it makes extensive use of Type casts and Pointers. The work is an attempt to nullify the possibility of Safety violations in Contiki. We use a powerful, still efficient tool called Deputy to achieve this. We also try to automate the process |
| Description: | 2009 International Conference on Advances in Recent Technologies in Communication and Computing |
| URI: | http://dyuthi.cusat.ac.in/purl/4180 |
| Files | Size |
|---|---|
| Safe Contiki OS ... Safety for Contiki OS.pdf | (361.1Kb) |
| Abstract: | Embedded systems, especially Wireless Sensor Nodes are highly prone to Type Safety and Memory Safety issues. Contiki, a prominent Operating System in the domain is even more affected by the problem since it makes extensive use of Type casts and Pointers. The work is an attempt to nullify the possibility of Safety violations in Contiki. We use a powerful, still efficient tool called Deputy to achieve this. We also try to automate the process |
| Description: | 2009 International Conference on Advances in Recent Technologies in Communication and Computing |
| URI: | http://dyuthi.cusat.ac.in/purl/4144 |
| Files | Size |
|---|---|
| Safe Contiki OS ... Safety for Contiki OS.pdf | (360.9Kb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.