Abdul Sathar,E I; Muraleedharan Nair,K R(Department of Statistics, Faculty of Science, 2002)
[+]
[-]
Abstract:
The present study focuses attention on defining certain measures of income inequality for the truncated distributions and characterization of probability distributions using the functional form of these measures, extension of some measures of inequality and stability to higher dimensions, characterization of bivariate models using the above concepts and estimation of some measures of inequality using the Bayesian techniques. The thesis defines certain measures of income inequality for the truncated distributions and studies the effect of truncation upon these measures. An important measure used in Reliability theory, to measure the stability of the component is the residual entropy function. This concept can advantageously used as a measure of inequality of truncated distributions. The geometric mean comes up as handy tool in the measurement of income inequality. The geometric vitality function being the geometric mean of the truncated random variable can be advantageously utilized to measure inequality of the truncated distributions. The study includes problem of estimation of the Lorenz curve, Gini-index and variance of logarithms for the Pareto distribution using Bayesian techniques.
George, Joseph; Zakkariya, K A(Cochin University Of Science And Technology, October , 2015)
[+]
[-]
Abstract:
The aim of this study is to investigate the role of operational flexibility for
effective project management in the construction industry.
The specific objectives are to:
a) Identify the determinants of operational flexibility potential
in construction project management
b) Investigate the contribution of each of the determinants to
operational flexibility potential in the construction industry
c) Investigate on the moderating factors of operational
flexibility potential in a construction project environment
d) Investigate whether moderated operational flexibility
potential mediates the path between predictors and effective
construction project management
e) Develop and test a conceptual model of achieving
operational flexibility for effective project management
The purpose of this study is to findout ways to utilize flexibility inorder to manage uncertain project environment and ultimately achieve effective project management. In what configuration these operational flexibility determinants are demanded by construction project environment in order to achieve project success. This research was conducted in three phases, namely: (i) exploratory phase (ii) questionnaire development phase; and (iii) data collection and analysis phase. The study needs firm level analysis and therefore real estate developers who are members of CREDAI, Kerala Chapter were considered. This study provides a framework on the functioning of operational flexibility, offering guidance to researchers and practitioners for discovering means to gain operational flexibility in construction firms. The findings provide an empirical understanding on kinds of resources and capabilities a construction firm must accumulate to respond flexibly to the changing project environment offering practitioners insights into practices that build firms operational flexibility potential. Firms are dealing with complex, continuous changing and uncertain environments due trends of globalization, technical changes and innovations and changes in the customers’ needs and expectations. To cope with the increasingly uncertain and quickly changing environment firms strive for flexibility. To achieve the level of flexibility that adds value to the customers, firms should look to flexibility from a day to day operational perspective. Each dimension of operational flexibility is derived from
competences and capabilities. In this thesis only the influence on customer satisfaction and learning exploitation of flexibility dimensions which directly add value in the customers eyes are studied to answer the followingresearch questions: “What is the impact of operational flexibility on customer satisfaction?.” What are the predictors of operational flexibility in construction industry? .These questions can only be answered after answering the questions like “Why do firms need operational flexibility?” and “how can firms achieve operational flexibility?” in the context of the construction industry. The need for construction firms to be flexible, via the effective utilization of organizational resources and capabilities for improved responsiveness, is important because of the increasing rate of changes in the business environment within which they operate. Achieving operational flexibility is also important because it has a significant correlation with a project effectiveness and hence a firm’s turnover. It is essential for academics and practitioners to recognize that the attainment of operational flexibility involves different types namely: (i) Modification (ii) new product development and (iii) demand management requires different configurations of predictors (i.e., resources, capabilities and strategies). Construction firms should consider these relationships and implement appropriate management practices for developing and configuring the right kind of resources, capabilities and strategies towards achieving different operational flexibility types.
Alex,Mathew; Dr.Madhusoodanan, K N(Cochin University of Science and Technology, June , 2004)
[+]
[-]
Abstract:
The thesis provides an overall review and introduction to amorphous semiconductors, followed by a brief discussion on the important structural models proposed for chalcogenide glasses and their electrical, optional and thermal properties. It also gives a brief description of the Physics of thin films, ion implantation and Photothermal Deflection Spectroscopy. A brief description of the experimental setup of a photothermal deflection spectrometer and the details of the preparation and optical characterization of the thin film samples. It deals with the employment of the subgap optional absorption measurement by PDS to characterize the defects, amorphization and annealing behavior in silicon implanted with B+ ions and the profiles of ion range and vacancy distribution obtained by the TRIM simulation. It reports the results of all absorption measurements by PDS in nitrogen implanted thin film samples of Ge-Se and As-Se systems
Joseph, Lyjo K; Dr. Radhakrishnan, P; Dr.Nampoori,V P N(Cochin University of Science & Technology, November , 2009)
[+]
[-]
Abstract:
Nondestructive photothermal methods as well as optical absorption and fluorescence spectroscopy are utilized to characterise three different materials, both thermally and optically. The possibility of using montmorillonite clay minerals, after textile waste-water treatment, is investigated for further applications. The laser induced luminescence studies and thermal characterisation of certain rare earth titanates prepared by self propagating high temperature synthesis method are also presented. Moreover, effort is made to characterise rare earth doped sol gel silica glasses with the help of these nondestructive techniques.
Description:
International School of Photonics, Cochin University of Science and Technology
Lyjo, Joseph K; Dr. Radhakrishnan, P(Cochin University of Science And Technology, November , 2009)
[+]
[-]
Abstract:
The advent of high optical quality transparent nano—structured glasses, the so-called transparent glass ceramics or vitroceramics disclosed the possibility of producing nano-sized photonic devices based on rare-earth doped up—converters. Transparent glass ceramics have been investigated as hosts for lanthanide ions envisioning the production of materials that are easy to shape and with high performance for photonic applications. Rare earth doped glasses have been extensively studied due to their potential applications in optical devices such as solid state lasers and optical fibers. Various photothermal and optical techniques have been successfully applied for the thermal and optical characterization of these rare earth doped materials. In the present thesis, the effective thermal parameters like thermal diffusivity and thermal effusivity of complex materials for various applications have been investigated using photothermal methods along with their optical characterization utilising the common optical absorption as well as fluorescence spectroscopic techniques. These sensitive optical procedures are also essential for exploiting these materials for further photonic applications.
Description:
School of photonics, Cochin University of Science And Technology
Harilal, S S; Girijavallabhan, C P(Cochin University of Science and Technology, 1997)
[+]
[-]
Abstract:
This thesis is entitled “OPTICAL EMISSION DIAGNOSTICS OF LASER PRODUCED PLASMA FROM GRAPHITE AND YBa2Cu3O7. The work presented in this thesis covers the experimental results on the plasma produced with moderately high power laser with irradiance range in between 10 GW cm 2 to 100 GW cm -2. The characterization of laser produced plasma from solid targets viz. graphite and high temperature superconducting material like YBa2Cu3O7 have been carried out. The fundamental frequency from a Q - switched Nd: YAG laser with 9 ns pulse
duration is used for the present studies. Various optical emission emission diagnostic techniques were employed for the the characterization of the LPP which include emission spectroscopy, time resolved studies, line broadening method etc. In order to understand the physical nature of the LPP like recombination, collisional excitation and the laser interaction with plasma, the time resolved studies offer the most logical approach
Jude Martin, Mendez; Dr.George, K E(Cochin University of Science & Technology, October , 2009)
[+]
[-]
Abstract:
This study was undertaken in order to upgrade blends of HDPE and
PP, two of the most widely used standard plastics so as to widen their
application spectrum. Dicumyl peroxide was used as the modifier for the
upgradation. Optimum concentration of dicumyl peroxide required for
modification was detennined by measurement of mechanical, rheological,
thermal and morphological properties. Selected blends were used to prepare
recyclable composites with nylon clothes by compression moulding. The
composites were characterized by measurement of mechanical and thermal
properties. The composites were recycled and the mechanical propertics of
the recycled material were determined.
Description:
Dept.of Polymer Science and Rubber Technology,
Cochin University of Science and technology
Rinku Mariam, Thomas; Dr.George, K E; Dr.Mathew, K T; Dr.Prathapan, S(Cochin University of Science & Technology, May , 2005)
[+]
[-]
Abstract:
The thesis deals with the preparation and dielectric characterization of
Poly aniline and its analogues in ISM band frequency of 2-4 GHz that includes part
of the microwave region (300 MHz to 300 GHz) of the electromagnetic spectrum
and an initial dielectric study in the high frequency [O.05MHz-13 MHz].
PolyaniIine has been synthesized by an in situ doping reaction under different
temperature and in the presence of inorganic dopants such as HCl H2S04, HN03,
HCl04 and organic dopants such as camphorsulphonic acid [CSA],
toluenesulphonic acid {TSA) and naphthalenesulphonic acid [NSA]. The variation
in dielectric properties with change in reaction temperature, dopants and
frequency has been studied. The effect of codopants and microemulsions on the dielectric properties has also been studied in the ISM band. The ISM band of
frequencies (2-4 GHz) is of great utility in Industrial, Scientific and Medical (ISM)
applications. Microwave heating is a very efficient method of heating dielectric
materials and is extensively used in industrial as well as household heating
applications.
Description:
Department of
Polymer Science and Rubber Technology,Cochin University of Science and
Technology
Rahana, Yoosuf; Dr.Jayaraj, M K(Cochin University of Science & Technology, October , 2007)
[+]
[-]
Abstract:
Two stage processes consisting of precursor preparation by thermal
evaporation followed by chalcogenisation in the required atmosphere is
found to be a feasible technique for the PV materials such as n-Beta In2S3,
p-CulnSe2, p-CulnS2 and p-CuIn(Sel_xSx)2. The growth parameters such as
chalcogenisation temperature and duration of chalcogenisation etc have been
optimised in the present study.Single phase Beta-In2S3 thin films can be obtained by sulfurising the indium
films above 300°C for 45 minutes. Low sulfurisation temperatures required
prolonged annealing after the sulfurisation to obtain single phase Beta-1n2S3,
which resulted in high material loss. The maximum band gap of 2.58 eV was
obtained for the nearly stoichiometric Beta-In2S3 film which was sulfurised at
350°C. This wider band gap, n type Beta-In2S3 can be used as an alternative to
toxic CdS as window layer in photovoltaics .The systematic study on the structural optical and electrical properties of
CuInSe2 films by varying the process parameters such as the duration of
selenization and the selenization temperature led to the conclusion that for
the growth of single-phase CuInSe2, the optimum selenization temperature is
350°C and duration is 3 hours. The presence of some binary phases in films
for shorter selenization period and lower selenization temperature may be
due to the incomplete reaction and indium loss. Optical band gap energy of
1.05 eV obtained for the films under the optimum condition.In order to obtain a closer match to the solar spectrum it is desirable to
increase the band gap of the CulnSe2 by a few meV . Further research
works were carried out to produce graded band gap CuIn(Se,S)2 absorber
films by incorporation of sulfur into CuInSe2. It was observed that when the
CulnSe2 prepared by two stage process were post annealed in sulfur atmosphere, the sulfur may be occupying the interstitial positions or forming
a CuInS2 phase along with CuInSe2 phase. The sulfur treatment during the
selenization process OfCu11 ln9 precursors resulted in Culn (Se,S)2 thin films.
A band gap of 1.38 eV was obtained for the CuIn(Se,S)2.The optimised thin films n-beta 1n2S3, p-CulnSe2 and p-Culn(Sel-xSx)2 can be
used for fabrication of polycrystalline solar cells.
Description:
Department of Physics,
Cochin University of Science and Technology
Vineetha, C P; Dr Babu, C.A(Cochin University of Science and Technology, June 22, 2015)
[+]
[-]
Abstract:
The renewable energy sources (RES) will play a vital role in the
future power needs in view of the increasing demand of electrical
energy and depletion of fossil fuel with its environmental impact. The
main constraints of renewable energy (RE) generation are high capital
investment, fluctuation in generation and requirement of vast land area.
Distributed RE generation on roof top of buildings will overcome these
issues to some extent.
Any system will be feasible only if it is economically viable and
reliable. Economic viability depends on the availability of RE and
requirement of energy in specific locations. This work is directed to
examine the economic viability of the system at desired location and
demand.
Ajitha, S; Dr.Sugunan, S(Cochin University of Science and Technology, September , 2008)
[+]
[-]
Abstract:
Mesoporous materials are of great interest to the materials community because of their potential applications for catalysis,separation of large molecules,medical implants,semiconductors,magnetoelectric devices.The thesis entitled 'Ordered Mesoporous Silica as supports for immobilization of Biocatalyst' presents how the pore size can be tuned without the loss in ordered structure for the entrapment of an industially important biocatalyst-amylase.Immobilization of enzymes on ordered mesoporous material has triggered new ooportunities for stabilizing enzymes with improved intrinsic and operational stabilities.
Description:
Department of Applied Chemistry,
Cochin University of Science and Technology