| Abstract: | Data centre is a centralized repository,either physical or virtual,for the storage,management and dissemination of data and information organized around a particular body and nerve centre of the present IT revolution.Data centre are expected to serve uniinterruptedly round the year enabling them to perform their functions,it consumes enormous energy in the present scenario.Tremendous growth in the demand from IT Industry made it customary to develop newer technologies for the better operation of data centre.Energy conservation activities in data centre mainly concentrate on the air conditioning system since it is the major mechanical sub-system which consumes considerable share of the total power consumption of the data centre.The data centre energy matrix is best represented by power utilization efficiency(PUE),which is defined as the ratio of the total facility power to the IT equipment power.Its value will be greater than one and a large value of PUE indicates that the sub-systems draw more power from the facility and the performance of the data will be poor from the stand point of energy conservation. PUE values of 1.4 to 1.6 are acievable by proper design and management techniques.Optimizing the air conditioning systems brings enormous opportunity in bringing down the PUE value.The air conditioning system can be optimized by two approaches namely,thermal management and air flow management.thermal management systems are now introduced by some companies but they are highly sophisticated and costly and do not catch much attention in the thumb rules. |
| Description: | Division of Safety and Fire Engineering,School of Engineering,Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2997 |
| Files | Size |
|---|---|
| Dyuthi-T0977.pdf | (12.35Mb) |
| Abstract: | In the present study the effect of hot air recirculation is studied with suitable assumptions. It identifies that, the pressure drop across the tile is a dominant parameter which governs the recirculation. The rack suction pressure of the hardware along with the pressure drop across the tile determines the point of recirculation in the cold aisle. The positioning of hardware in the racks play an important role in controlling the recirculation point. The present study is thus helpful in the design of data centre air flow, based on the theory of jets. The air flow can be modelled both quantitatively and qualitatively based on the results |
| Description: | Division Of Safety And Fire Engineering School Of Engineering Cochin University Of Science And Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3666 |
| Files | Size |
|---|---|
| Dyuthi-T1586.pdf | (12.63Mb) |
| Abstract: | This work identifies the importance of plenum pressure on the performance of the data centre. The present methodology followed in the industry considers the pressure drop across the tile as a dependant variable, but it is shown in this work that this is the only one independent variable that is responsible for the entire flow dynamics in the data centre, and any design or assessment procedure must consider the pressure difference across the tile as the primary independent variable. This concept is further explained by the studies on the effect of dampers on the flow characteristics. The dampers have found to introduce an additional pressure drop there by reducing the effective pressure drop across the tile. The effect of damper is to change the flow both in quantitative and qualitative aspects. But the effect of damper on the flow in the quantitative aspect is only considered while using the damper as an aid for capacity control. Results from the present study suggest that the use of dampers must be avoided in data centre and well designed tiles which give required flow rates must be used in the appropriate locations. In the present study the effect of hot air recirculation is studied with suitable assumptions. It identifies that, the pressure drop across the tile is a dominant parameter which governs the recirculation. The rack suction pressure of the hardware along with the pressure drop across the tile determines the point of recirculation in the cold aisle. The positioning of hardware in the racks play an important role in controlling the recirculation point. The present study is thus helpful in the design of data centre air flow, based on the theory of jets. The air flow can be modelled both quantitatively and qualitatively based on the results. |
| Description: | Division of Safety and Fire Engineering, School of Engineering, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3264 |
| Files | Size |
|---|---|
| Dyuthi-T1238.pdf | (12.63Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/4905 |
| Files | Size |
|---|---|
| Dyuthi- T1999.pdf | (4.472Mb) |
| Abstract: | The thesis is mainly concerned with the study of the bacteriology of freezing of mackerel(Rastrelliger kanaggrta)and prawn (Metgpggaeus ddbsoni) The thesis in four sections describes the salient features of the observations and inferences on the bacteriology of freezing of fishes and prawns. This includes the evaluation of methodology for the optimum recovery of bacteria, bacteriology of the newly caught fish and prawn, the effect of freezing temperatures on the survival of selected species of isolates from fish and prawn and the bacteriology of freezing, frozen storage and thawing of prawn/fish emphasizing the effect contributed by each. |
| Description: | School of marine Science, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3399 |
| Files | Size |
|---|---|
| Dyuthi-T1376.pdf | (5.946Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/1212 |
| Files | Size |
|---|---|
| Nirmala Thampuran 1988.PDF | (700.9Kb) |
| URI: | http://dyuthi.cusat.ac.in/purl/1026 |
| Files | Size |
|---|---|
| Jacob K Daniel 1985.pdf | (244.1Kb) |
| URI: | http://dyuthi.cusat.ac.in/purl/1032 |
| Files | Size |
|---|---|
| Ramachandran Nair V K 1988.pdf | (249.8Kb) |
| Abstract: | The objective of the study of \Queueing models with vacations and working vacations" was two fold; to minimize the server idle time and improve the e ciency of the service system. Keeping this in mind we considered queueing models in di erent set up in this thesis. Chapter 1 introduced the concepts and techniques used in the thesis and also provided a summary of the work done. In chapter 2 we considered an M=M=2 queueing model, where one of the two heterogeneous servers takes multiple vacations. We studied the performance of the system with the help of busy period analysis and computation of mean waiting time of a customer in the stationary regime. Conditional stochastic decomposition of queue length was derived. To improve the e ciency of this system we came up with a modi ed model in chapter 3. In this model the vacationing server attends the customers, during vacation at a slower service rate. Chapter 4 analyzed a working vacation queueing model in a more general set up. The introduction of N policy makes this MAP=PH=1 model di erent from all working vacation models available in the literature. A detailed analysis of performance of the model was provided with the help of computation of measures such as mean waiting time of a customer who gets service in normal mode and vacation mode. |
| Description: | Department of Mathematics, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3803 |
| Files | Size |
|---|---|
| Dyuthi-T1736.pdf | (5.806Mb) |
| Abstract: | The thesis entitled “Queueing Models with Vacations and Working Vacations" consists of seven chapters including the introductory chapter. In chapters 2 to 7 we analyze different queueing models highlighting the role played by vacations and working vacations. The duration of vacation is exponentially distributed in all these models and multiple vacation policy is followed.In chapter 2 we discuss an M/M/2 queueing system with heterogeneous servers, one of which is always available while the other goes on vacation in the absence of customers waiting for service. Conditional stochastic decomposition of queue length is derived. An illustrative example is provided to study the effect of the input parameters on the system performance measures. Chapter 3 considers a similar setup as chapter 2. The model is analyzed in essentially the same way as in chapter 2 and a numerical example is provided to bring out the qualitative nature of the model. The MAP is a tractable class of point process which is in general nonrenewal. In spite of its versatility it is highly tractable as well. Phase type distributions are ideally suited for applying matrix analytic methods. In all the remaining chapters we assume the arrival process to be MAP and service process to be phase type. In chapter 4 we consider a MAP/PH/1 queue with working vacations. At a departure epoch, the server finding the system empty, takes a vacation. A customer arriving during a vacation will be served but at a lower rate.Chapter 5 discusses a MAP/PH/1 retrial queueing system with working vacations.In chapter 6 the setup of the model is similar to that of chapter 5. The signicant dierence in this model is that there is a nite buer for arrivals.Chapter 7 considers an MMAP(2)/PH/1 queueing model with a nite retrial group |
| Description: | Department of Mathematics, Cochin University of Science and Technology. |
| URI: | http://dyuthi.cusat.ac.in/purl/3154 |
| Files | Size |
|---|---|
| Dyuthi-T1128.pdf | (5.806Mb) |
| Abstract: | In this thesis we study the effect of rest periods in queueing systems without exhaustive service and inventory systems with rest to the server. Most of the works in the vacation models deal with exhaustive service. Recently some results have appeared for the systems without exhaustive service. |
| Description: | Department Of‘ Mathematics And Statistics,Cochin University Of Science And Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3579 |
| Files | Size |
|---|---|
| Dyuthi-T1552.pdf | (3.403Mb) |
| Abstract: | In this thesis we have introduced and studied the notion of self interruption of service by customers. Service interruption in queueing systems have been extensively discussed in literature (see, Krishnamoorthy, Pramod and Chakravarthy [38]) for the most recent survey. So far all work reported deal with cases in which service interruptions are generated by sources other than customers. However, there are situations where interruptions are due to the customers rather than the system. Such situations are especially arise at doctors clinic, banks, reservation counter etc. Our attempt is to quantify a few of such problems. Systematically we have proceed from single server queue (in Chapter 2) to multi-server queues (Chapter 3). In Chapte 4, we have studied a very general multiserver queueing model with service interruption and protection of service phases. We also introduced customer interruption in a retrial setup (in Chapter 5). All models (from Chapter 2 to Chapter 4) that were analyzed involve 'non-preemptive priority' for interrupted customers where as in the model discussed in Chapter 5 interruption of service by customers is not encouraged. So the interrupted customers cannot access the server as long as there are primary customers in the system. In Chapter 5 we have obtained an explicit expression for the stability condition of the system. In all models analyzed in this thesis, we have assumed that no more than one interruption is allowed for a customer while in service. Since the models are not analytically tractable, a large number of numerical illustrations were given in each chapter it illustrate the working of the systems. We can extend the models discussed in this thesis to several directions. For example some of the models can be analyzed with both server induced and customer induced interruptions the results for which are not available till date. Another possible extension of work is to the case where there is no bound on the number of interruptions a customer is permitted to have before service completion. More complex is the case where a customer is permitted to have a nite number (K ≥ 2) of We can extend the models discussed in this thesis to several directions. |
| Description: | Department of Mathematics, Cochin University of Science and Technology. |
| URI: | http://dyuthi.cusat.ac.in/purl/3137 |
| Files | Size |
|---|---|
| Dyuthi-T1111.pdf | (5.338Mb) |
| Abstract: | In many situations probability models are more realistic than deterministic models. Several phenomena occurring in physics are studied as random phenomena changing with time and space. Stochastic processes originated from the needs of physicists.Let X(t) be a random variable where t is a parameter assuming values from the set T. Then the collection of random variables {X(t), t ∈ T} is called a stochastic process. We denote the state of the process at time t by X(t) and the collection of all possible values X(t) can assume, is called state space |
| URI: | http://dyuthi.cusat.ac.in/purl/5043 |
| Files | Size |
|---|---|
| Dyuthi-T2110.pdf | (2.158Mb) |
| Description: | Department of Mathematics, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2762 |
| Files | Size |
|---|---|
| Dyuthi-T0785.pdf | (4.528Mb) |
| Abstract: | Application of Queueing theory in areas like Computer networking, ATM facilities, Telecommunications and to many other numerous situation made people study Queueing models extensively and it has become an ever expanding branch of applied probability. The thesis discusses Reliability of a ‘k-out-of-n system’ where the server also attends external customers when there are no failed components (main customers), under a retrial policy, which can be explained in detail. It explains the reliability of a ‘K-out-of-n-system’ where the server also attends external customers and studies a multi-server infinite capacity Queueing system where each customer arrives as ordinary but can generate into priority customer which waiting in the queue. The study gives details on a finite capacity multi-server queueing system with self-generation of priority customers and also on a single server infinite capacity retrial Queue where the customer in the orbit can generate into a priority customer and leaves the system if the server is already busy with a priority generated customer; else he is taken for service immediately. Arrival process is according to a MAP and service times follow MSP. |
| URI: | http://dyuthi.cusat.ac.in/purl/760 |
| Files | Size |
|---|---|
| Dyuthi-T0200.pdf | (4.100Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/5561 |
| Files | Size |
|---|---|
| Dyuthi T-2603.pdf | (14.24Mb) |
| Abstract: | The Human race of our century is in gluttonous search for novel engineering products which led to a skyrocketed progress in research and fabrication of filled polymers. Recently, a big window has been opened up for speciality polymers especially elastomers with promising properties. Among the many reasons why rubbers are widely used in the process industries, three are considered as important. Firstly, rubbers operate in a variety of environments and possess usable ranges of deformity and durability and can be exploited through suitable and more or less conventional equipment design principles. Secondly, rubber is an eminently suitable construction material for protection against corrosion in the chemical plant and equipment against various corrosive chemicals as, acids and alkalies and if property tailored, can shield ionising radiations as X-rays and gamma rays in medical industry, with minimum maintenance lower down time, negligible corrosion and a preferred choice for aggressive corroding and ionising environment. Thirdly, rubber can readily and hastily, and at a relatively lower cost, be converted into serviceable products, having intricate shapes and dimensions. In a century’s gap, large employment of flexible polymer materials in the different segments of industry has stimulated the development of new materials with special properties, which paved its way to the synthesis of various nanoscale materials. At nano scale, one makes an entry into a world where multidisciplinary sciences meet and utilises the previously unapproached infinitesimal length scale, having dimension which measure upto one billionth of a meter, to create novel properties. The nano fillers augment the elastomers properties in an astonishing fashion due to their multifunctional nature and unprecedented properties have been exhibited by these polymer-nanocomposites just to beat the shortcomings of traditional micro composites. The current research aims to investigate the possibility of using synthesised nano barium sulphate for fabricating elastomer-based nanocomposites and thereby imparting several properties to the rubber. In this thesis, nano materials, their synthesis, structure, properties and applications are studied. The properties of barium sulphate like chemical resistance and radiopacity have been utilized in the present study and is imparted to the elastomers by preparing composites. |
| URI: | http://dyuthi.cusat.ac.in/purl/5116 |
| Files | Size |
|---|---|
| Dyuthi-T 2181.pdf | (8.963Mb) |
| Abstract: | The Human race of our century is in gluttonous search for novel engineering products which led to a skyrocketed progress in research and fabrication of filled polymers. Recently, a big window has been opened up for speciality polymers especially elastomers with promising properties. Among the many reasons why rubbers are widely used in the process industries, three are considered as important. Firstly, rubbers operate in a variety of environments and possess usable ranges of deformity and durability and can be exploited through suitable and more or less conventional equipment design principles. Secondly, rubber is an eminently suitable construction material for protection against corrosion in the chemical plant and equipment against various corrosive chemicals as, acids and alkalies and if property tailored, can shield ionising radiations as X-rays and gamma rays in medical industry, with minimum maintenance lower down time, negligible corrosion and a preferred choice for aggressive corroding and ionising environment. Thirdly, rubber can readily and hastily, and at a relatively lower cost, be converted into serviceable products, having intricate shapes and dimensions. In a century’s gap, large employment of flexible polymer materials in the different segments of industry has stimulated the development of new materials with special properties, which paved its way to the synthesis of various nanoscale materials. At nano scale, one makes an entry into a world where multidisciplinary sciences meet and utilises the previously unapproached infinitesimal length scale, having dimension which measure upto one billionth of a meter, to create novel properties. The nano fillers augment the elastomers properties in an astonishing fashion due to their multifunctional nature and unprecedented properties have been exhibited by these polymer-nanocomposites just to beat the shortcomings of traditional micro composites. The current research aims to investigate the possibility of using synthesised nano barium sulphate for fabricating elastomer-based nanocomposites and thereby imparting several properties to the rubber. In this thesis, nano materials, their synthesis, structure, properties and applications are studied. The properties of barium sulphate like chemical resistance and radiopacity have been utilized in the present study and is imparted to the elastomers by preparing composites |
| Description: | Department of Polymer Science and Rubber Technology Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/4683 |
| Files | Size |
|---|---|
| Dyuthi-T1822.pdf | (8.970Mb) |
| Abstract: | The present work is to impart radiopacity in various natural polymers like chitosan, natural rubber and derivatives of chitosan and to characterize it. This thesis collated the radiopaque properties of these radiopaque polymers and various technological applications in the medical field. The applications of radiopaque polymers leads to an exploitation of radiopaque properties like X-ray visibility, optical density, effective atomic number, attenuation coefficient of biopolymers like chitosan, chitosan formate, chitosan acetate, carboxy methyl chitosan and natural rubber. The radiopaqe properties of these materials highly depend upon the size, shape, amount of radiopacifier and crystallinity of the radiopaque material. Radiopaque chitosan microspheres were prepared by cross linking with glutaraldehyde followed by the encapsulation of barium sulpahte. The effect of different emulsion systems on the morphology of chitosan microspheres were studied. The study concentrates radiopaque natural rubber for shielding applications. It reveals that to improve the particle size, morphology and crystalline phase of the zinc oxide particles, a novel method for the preparation of zinc oxide is adopted. A detailed radiopacity study was done in natural rubber containing 100phr precipitated zinc oxide prepared from different zinc salts. One of the significant findings of this investigation is that NR vulcanizates containing precipitated zinc oxide (from zinc acetate) shows higher attenuation coefficient. These interesting findings reveal the applications of these natural radiopaque systems in various fields like surgical tools, medical tubings, catheters, radiation shielding,etc. |
| URI: | http://dyuthi.cusat.ac.in/purl/753 |
| Files | Size |
|---|---|
| Dyuthi-T0189.pdf | (5.544Mb) |
| Abstract: | Hindi |
| Description: | Faculty of Humanities, The Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/4771 |
| Files | Size |
|---|---|
| Dyuthi-T1868.pdf | (5.123Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.