Abstract: | In the present work different new approaches for the synthesis of Vitamin A are investigated. In these synthetic schemes, all the twenty carbon atoms of the target molecule are derived either fully from components isolated from common essential oils or partially from commercially available materials. By retrosynthetic analysis, Vitamin A molecule can be disconnected into a cyclic and a linear unit. Different methods for the synthesis of the linear and the cyclic components are described. The monoterpenes, geraniol and citral, major constituents of palmarosa and lemongrass oils, have the required basic carbon framework for consideration as starting materials for the synthesis of Vitamin A. The potential of these easily available naturally occurring compounds as promising starting materials for Vitamin A synthesis is demonstrated. Organoselenium and organosulfur mediated functional group transformations for the synthesis of the functionalised conjugated C10 linear components (ie., the dimethyloctatriene derivatives) are reported. The classical approaches as well as the attempted preparation of cyclic C10 and C13 units employed in the present study as intermediates for Vitamin A synthesis are described. The utility of commercially available materials namely 2-acetylbutyrolactone and levulinic acid in -the preparation of C5 intermediates for Vitamin A synthesis is demonstrated. |
Description: | Department Of Applied Chemistry Cochin University Of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3495 |
Files | Size |
---|---|
Dyuthi-T1431.pdf | (1.607Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1020 |
Files | Size |
---|---|
Jose David P 1989.pdf | (233.8Kb) |
Abstract: | The thesis documents a comprehensive systematic account of Vembenad lake fishes and to study the effect of physico-chemical parameters on the distribution and abundance of fishes in the lake. This study is expected to advance the knowledge on the biological aspects of two commercially important fishes of the lake which are very desirable for brackish water fish farming. Additionally, the results of the studies on the ecology as habitat, occurrence, season and abundance of all the recorded fishes of the lake end the commercially important fish species of the lake are also incorporated. A general appraisal on the detrimental factors which are adversely affecting the fisheries resources of the lake are presented and some measures of conservation are also suggested. The results of the present study are helpful in formulating suitable schemes for management of parts of the Vembenad lake for capture and culture fisheries |
Description: | School of Marine Science, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3185 |
Files | Size |
---|---|
Dyuthi-T1159.pdf | (23.56Mb) |
Abstract: | Rainbow sardines of the genus belonging to the family Dueenaieriidae. are small pelagic fishes forming a fairly good, though not abundant. seasonal fishery all along the coasts of India inhabiting the coastal waters. There have been some earlier reports on such individual aspects as their systematic, distribution, abundance. Ostecology and a few biological factors but no attempt has been made towards a comprehensive study on this group. Two species of rainbow sardines are known to occur in the Indian seas and while a knowledge about their biology would be useful from the fishery point of view. it was also thought a study of their systematic position, especially regarding the identity or the two species which had raised doubts among earlier workers would lead to a better understanding or the group as a whole. This thesis is mainly based on studies during the period from April 1969 to march 1971 with a continued investigation of fishhery aspects till December 1975. from the Gulf of manar: and the Palk Bay around mandapam area. on the south-east coast of India. Thus the work deals with the systemtics, biology and fishery of rainbow sardines of Indian seas. |
Description: | Central Marine Fisheries Research Institute |
URI: | http://dyuthi.cusat.ac.in/purl/3403 |
Files | Size |
---|---|
Dyuthi-T1380.pdf | (10.66Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1160 |
Files | Size |
---|---|
Radhakrishnan Nair P N 1984.PDF | (219.3Kb) |
URI: | http://dyuthi.cusat.ac.in/purl/1153 |
Files | Size |
---|---|
Madhusoodana Kurup B 1983.PDF | (286.0Kb) |
Abstract: | The oceans in their expanse cover, seven - tenths of the Earth surface. Despite being restricted in size, the littoral zone or the intertidal zone (beach) has the greatest variation in environment factors of any marine area .Stemming from this variation ,a treamendous diversity of life, which may be great as or greater than that found in the more extensive sub tidal habits exist in this realm. the study beaches harbour diverse and abundant assemblage of marine organisms. Besides macro funna, microscopic organisms belonging to the lower and higher invertebrate taxa profusely inhabit these beaches. The ecological realm where these animals exist is known as the interstitial environment, which in principle includes the pore spaces in between the sand grains containing copious supply of nutrient rich oxygenated seawater. An astonishing diversity of taxa could be found within the interstitial fauna. |
URI: | http://dyuthi.cusat.ac.in/purl/3022 |
Files | Size |
---|---|
Dyuthi-T1000.pdf | (37.30Mb) |
Abstract: | Trawling, despite being heavily energy expensive, still continues to be the most energy expensive fishing method particularly so in View of the export oriented nature of the Indian seafood industry. This study therefore aims at analyzing the efficiency of trawls operation from Cochin, an important fishing center along the southwest coast of India. The analysis is made along two perspectives - economic and technological. Even though technological efficiency complement economic efficiency, in the fishing parlance, parameters like the size composition of the catch, selectivity factors, etc., will have a direct bearing on the technological qualities of the trawl, and which parameters will have a significant impact on the effective exploitation of a fishery stock. Whereas the technological analysis aims at improving the efficiency with regard to the effective utilization of fuel and fishery stocks, economic analysis ascertains the present status of the trawling operations from the commercial angle. |
Description: | Department of Industrial Fisheries,School of Marine Science, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3207 |
Files | Size |
---|---|
Dyuthi-T1181.pdf | (4.609Mb) |
Abstract: | Teredinids (shipworms), a group of wood boring bivalves occurring in the Cochin Harbour region have been taken up for the eco-physiological studies. On the ecological part, the occurrence, abunance and seasonal intensity of the teredinids in relation to hydrographic conditions have been studied. On the physiological part, salinity tolerance and oxygen consumption of the most commonly occurring shipworms, Nausitcra hedlgyi and Teredo furcifera have been investigated. The hydrographic factors studied are temperature, salinity, dissolved oxygen, phosphate, nitrite, silicate and pH. The variation in temperature is found to be comparatively narrow. But seasonal variation in salinity, dissolved oxygen, phosphate, nitrite and silicate has been observed, with the highest values during the monsoon period. In the case of pH, the minimum value has been obtained during the low saline period and the maximum value, during the high saline period. Of the various hydrographic factors studied, salinity has been found to be the most important fluctuating environmental parameter influencing the life of organisms in the habitat. |
Description: | School of marine sciences, Cochin University of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3292 |
Files | Size |
---|---|
Dyuthi-T1274.pdf | (7.152Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1842 |
Files | Size |
---|---|
Dyuthi-T0263.pdf | (4.978Mb) |
Abstract: | This thesis aims to develop new toughened systems for epoxy resin via physical and chemical modifications. Initially the synthesis of DGEBA was carried out and the properties compared with that of the commercial sample. Subsequently the modifier resins to be employed were synthesized. The synthesized resin were characterized by spectroscopic method (FTIR and H NMR), epoxide equivalent and gel permeation chromatography. Chemical modification involves the incorporation of thermoset resins such a phenolics, epoxy novolacs, cardanol epoxides and unsaturated polyester into the epoxy resin by reactive belnding. The mechanical and thermal properties of the blends were studied. In the physical modification route, elastomers, maleated elastomers and functional elastomers were dispersed as micro-sized rubber phase into the continuous epoxy phase by a solution blending technique as against the conventional mechanical blending technique. The effect of matrix toughening on the properties of glass reinforced composites and the effect of fillers on the properties of commercial epoxy resin were also investigated. The blends were characterized by thermo gravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, scanning electron microscopy and mechanical property measurements. Among the thermoset blends, substantial toughening was observed in the case of epoxy phenolic novolacs especially epoxy para cresol novolac (ECN). In the case of elastomer blending , the toughest blends were obtained in the case of maleic anhydride grafted NBR. Among functional elastomers the best results were obtained with CTBN. Studies on filled and glass reinforced composites employing modified epoxy as matrix revealed an overall improvement in mechanical properties |
URI: | http://dyuthi.cusat.ac.in/purl/759 |
Files | Size |
---|---|
Dyuthi-T0257.pdf | (5.992Mb) |
Abstract: | Industrialisation affects air, water, and soil. Industrial effluents which enter the aquatic environment either by direct disposal or through run off, affect living organisms at morphological and physiological levels. In any living tissue toxic materials exert their effects first at molecular and biochemical levels (Robbins and Angell, 1976). Most of the industrial effluents contain elevated concentrations of organic and inorganic chemicals capable of eliciting stimulatory or inhibitory effects on the metabolism of aquatic organisms. Heavy metals form an important group of environmental pollutants. Effects of pollution on the aquatic environment by heavy metals have received considerable attention in recent years due to their toxicity even at very low levels, persistence in the environment, and chances of getting biomagnified. A pollutant that does not affect a particular process under normal unstressed condition may affect the ability of the animal to adjust to changing environmental conditions which ultimately decrease its chances of survival (Thurberg et al., 1973 |
Description: | School of Environmental Studies, Cochin University of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3737 |
Files | Size |
---|---|
Dyuthi-T1691.pdf | (3.191Mb) |
Abstract: | The present study involved investigation of the lethal and sublethal effects of three pesticides individually. The pesticides are the commercial formulations of DDT (organochlorine).Dime— cron (organophosphate) and Gramoxone (paraquat dichloride).Aspects like individual toxicity, modulations in the activities of some selected enzymes, consequent to exposure to sub lethal levels of pesticides, sub lethal effects onperipheral haematology and alterations caused on the tissue architecture of brain, gills and liver, have been documented. Attempts have been made to analyse the impact of pesticides, added at realistic Levels to the experimental media, on the life and activity of Etroplus maculatus |
Description: | Division of Pkuflxua Biology, Microbiology and Biochemistry, School of Marine Sciences, Cochin University of Science and Tehnology |
URI: | http://dyuthi.cusat.ac.in/purl/3169 |
Files | Size |
---|---|
Dyuthi-T1143.pdf | (9.561Mb) |
Abstract: | The present study was undertaken to evaluate the effectiveness of a few physico-chemical and biological methods for the treatment of effluents from natural rubber processing units. The overall objective of this study is to evaluate the effectiveness of certain physico-chemical and biological methods for the treatment of effluents from natural rubber processing units. survey of the chemical characteristics of the effluents discharged from rubber processing units showed that the effluents from latex concentration units were the most polluting |
Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3486 |
Files | Size |
---|---|
Dyuthi-T1448.pdf | (2.387Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1114 |
Files | Size |
---|---|
Ambika G 1988.pdf | (1.229Mb) |
Abstract: | It has become clear over the last few years that many deterministic dynamical systems described by simple but nonlinear equations with only a few variables can behave in an irregular or random fashion. This phenomenon, commonly called deterministic chaos, is essentially due to the fact that we cannot deal with infinitely precise numbers. In these systems trajectories emerging from nearby initial conditions diverge exponentially as time evolves)and therefore)any small error in the initial measurement spreads with time considerably, leading to unpredictable and chaotic behaviour The thesis work is mainly centered on the asymptotic behaviour of nonlinear and nonintegrable dissipative dynamical systems. It is found that completely deterministic nonlinear differential equations describing such systems can exhibit random or chaotic behaviour. Theoretical studies on this chaotic behaviour can enhance our understanding of various phenomena such as turbulence, nonlinear electronic circuits, erratic behaviour of heart and brain, fundamental molecular reactions involving DNA, meteorological phenomena, fluctuations in the cost of materials and so on. Chaos is studied mainly under two different approaches - the nature of the onset of chaos and the statistical description of the chaotic state. |
Description: | Department of physics, Cochin University of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3315 |
Files | Size |
---|---|
Dyuthi-T1288.pdf | (3.398Mb) |
Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2292 |
Files | Size |
---|---|
Dyuthi-T0584.pdf | (6.990Mb) |
Abstract: | The current research investigates the possibility of using unmodified and modified nanokaolin, multiwalled carbon nanotube (MWCNT) and graphene as fillers to impart enhancement in mechanical, thermal, and electrical properties to the elastomers. Taking advantage of latex blending method, nanoclay, MWCNT and graphene dispersions, prepared by ultra sound sonication are dispersed in polymer latices. The improvement in material properties indicated better interaction between filler and the polymer.MWCNT and graphene imparted electrical conductivity with simultaneous improvement in mechanical properties. Layered silicates prepared by microwave method also significantly improve the mechanical properties of the nanocomposites. The thesis entitled ‘Studies on the use of Nanokaolin, MWCNT and Graphene in NBR and SBR’ consists of ten chapters. The first chapter is a concise introduction of nanocomposites, nanofillers, elastomeric matrices and applications of polymer nanocomposites. The state-of-art research in elastomer based nanocomposites is also presented. At the end of this chapter the main objectives of the work are mentioned. Chapter 2 outlines the specifications of various materials used, details of experimental techniques employed for preparing and characterizing nanocomposites. Chapter3 includes characterization of the nanofillers, optimsation of cure time of latex based composites and the methods used for the preparation of latex based and dry rubber based nanocomposites. Chapter4 presents the reinforcing effect of the nanofillers in XNBR latex and the characterization of the nanocomposites. Chapter5 comprises the effect of nanofillers on the properties of SBR latex and their characterization Chapter 6 deals with the study of cure characteristics, mechanical and thermal properties and the characterization of NBR based nanocomposites. Chapter7 is the microwave studies of MWCNT and graphene filled elastomeric nanocomposites. Chapter 8 gives details of the preparation of layered silicates, their characterization and use in different elastomeric matrices. Chapter 9 is the study of mechanical properties of nanoclay incorporated nitrile gloves .Chapter 10 presents the summary and conclusions of the investigation. |
URI: | http://dyuthi.cusat.ac.in/purl/4940 |
Files | Size |
---|---|
Dyuthi-T2018.pdf.pdf | (6.333Mb) |
Description: | Department of Applied Chemistry, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/xmlui/purl/1964 |
Files | Size |
---|---|
Dyuthi-T0478.pdf | (44.66Mb) |
Abstract: | The thesis describes utilisation of reclaimed rubber, Whole Tyre Reclaim (WTR) produced from bio non- degradable solid pollutant scrap and used tyres. In this study an attempt has made to optimize the substitution of virgin rubber with WTR in both natural and synthetic rubber compounds without seriously compromising the important mechanical properties. The WTR is used as potent source of rubber hydrocarbon and carbon black filler. Apart from natural rubber (NR), Butadiene rubber (BR), Styrene butadiene rubber (SBR), Acrylonitrile butadiene rubber (NBR) and Chloroprene rubber (CR) were selected for study, being the most widely used general purpose and specialty rubbers. The compatibility problem was addressed by functionalisation of WTR with maleic anhydride and by using a coupling agent Si69.The blends were systematically evaluated with respect to various mechanical properties. The thermogravimetric analyses were also carried out to evaluate the thermal stability of the blends.Mechanical properties of the blends were property and matrix dependant. Presence of reinforcing carbon black filler and curatives in the reclaimed rubber improved the mechanical properties with the exception of some of the elastic properties like heat build up, resilience, compression set. When WTR was blended with natural rubber and synthetic rubbers, as the concentration of the low molecular weight, depolymerised WfR was increased above 46-weight percent, the properties deteriorates.When WTR was blended with crystallizing rubbers such as natural rubber and chloroprene rubber, properties like tensile strength, ultimate elongation were decreased in presence of WTR. Where as in the case of blends of WTR with non-crystallizing rubbers reinforcement effect was more prominent.The effect of functionalisation and coupling agent was studied in three matrices having different levels of polarity(NBR, CR and SBR).The grafting of maleic anhydride on to WTR definitely improved the properties of its blends with NBR, CR and SBR, the effect being prominent in Chloroprene rubber.Improvement in properties of these blends could also achieved by using a coupling agent Si69. With this there is apparent plasticizing effect at higher loading of the coupling agent. The optimum concentration of Si69 was 1 phr for improved properties, though the improvements are not as significant as in the case of maleic anhydride grafting.Thermal stability of the blend was increased by using silane-coupling agent. |
Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2191 |
Files | Size |
---|---|
Dyuthi-T0543.pdf | (5.640Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.