Abstract: | Managers are central to any fuction in a complex and developed society. Their talents are reckoned to be cardinal in developed economies and a basic yearning of all developing economies.In order to survive and produce results in a turbulent and transient environment, the task is to understand the nature of factors contributing to managerial effectiveness. This study is an attempt towards this core issue of the present from a different perspective. This study tries to focus attention on a group of managers functioning in the field of banking, a core sector in the country's economy. The gamut of economic activities in Kerala being predominantly service-oriented, importance of commercial banking is almost indisputable. Though economists would argue that the disproportionate development of service sector is anomalous when viewed against the hazy scenarios in the primary and secondary sectors of the state’s economy, the extent and pace of growth in the banking sector has had its dole meted out by ambitious and productive managers fiinctioning in the field. Researcher’s attempt here is to thresh the grain and chaff among bank managers in terms of their effectiveness and to account for the variations in the light of their ability to affect the thoughts and actions of their subordinates. To put it succinctly, the attempt herein is to explain the effectiveness of bank managers in the light of their ‘Power Profile’ taken to be comprising Power Differentials, Power Bases, their Visibility and Credibility in the organisation and, the Power Styles typically used by them for influencing subordinates. |
Description: | of Management Studies, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3193 |
Files | Size |
---|---|
Dyuthi-T1167.pdf | (5.495Mb) |
Abstract: | HINDI |
Description: | Department of hindi, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/4830 |
Files | Size |
---|---|
Dyuthi-T1927.pdf | (7.042Mb) |
Abstract: | HINDI |
Description: | Department of Hindi Cochin University of Science & Technology |
URI: | http://dyuthi.cusat.ac.in/purl/4816 |
Files | Size |
---|---|
Dyuthi-T1913.pdf | (4.278Mb) |
Abstract: | In spite of the far longed practices of technical analysis by many participants in Indian stock market, none have arrived at the exact position of technical analysis as a tool for foretelling share prices. There is no evidence supporting that one has established its definite role in predicting the behaviour of share price and also to see the extent of validity (how far reliable) of technical tools in Indian stock market. The problem is the vacuum in the arena of securities market analysis where an unrecognised tool is practised, i.e., whether to hold on to technical analysis or to drop it. Again, as already stated in this chapter, its validity need not continue forever. It may become futile as happened in developed markets. Continuous practice of a tool, which is valid only during discontinuous times is also an error. The efficacy of different market phenomena in terms of their ability to foretell the extent and direction of the price movements and reliability thereof remain as not yet proved in. This requires further study in this area so that this controversy may be settled. A solution to the problem requires enquiring and establishing the applicability of technical analysis, if any, there is in the Indian stock market. The study has the following two broad objectives for the purpose of confirming the applicability, if any, of technical analysis in the Indian stock market. The first objective is to ascertain the current validity of ‘traditional holding with respect to patterns’ and the second objective is to ascertain the ‘consistent superiority’, if any, of technical indicators over non-signal strategies in return generation. The study analyses the five patterns, which are widely known and commonly found in publications. They are: (1) Symmetrical Triangles, (2) Rising Wedges, (3) Falling Wedges, (4) Head and Shoulders Top and (5) Head and Shoulders Bottom. |
Description: | School Of Management Studies Cochin University Of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3541 |
Files | Size |
---|---|
Dyuthi-T1509.pdf | (7.137Mb) |
Abstract: | Low-lying coastal areas are more vulnerable to the impacts of climate change as they are highly prone for inundation to SLR (Sea-Level Rise). This study presents an appraisal of the impacts of SLR on the coastal natural resources and its dependent social communities in the low-lying area of VellareColeroon estuarine region of the Tamil Nadu coast, India. Digital Elevation Model (DEM) derived from SRTM 90M (Shuttle Radar Topographic Mission) data, along with GIS (Geographic Information System) techniques are used to identify an area of inundation in the study site. The vulnerability of coastal areas in Vellar-Coleroon estuarine region of Tamil Nadu coast to inundation was calculated based on the projected SLR scenarios of 0.5 m and 1 m. The results demonstrated that about 1570 ha of the LULC (Land use and Land cover) of the study area would be permanently inundated to 0.5 m and 2407 ha for 1 m SLR and has also resulted in the loss of three major coastal natural resources like coastal agriculture, mangroves and aquaculture. It has been identified that six hamlets of the social communities who depend on these resources are at high-risk and vulnerable to 0.5 m SLR and 12 hamlets for 1 m SLR. From the study, it has been emphasized that mainstreaming adaptation options to SLR should be embedded within a coastal zone management and planning effort, which includes all coastal natural resources (ecosystem-based adaptation), and its dependent social communities (community-based adaptation) involved through capacity building |
Description: | Ocean & Coastal Management 69 (2012) 327-339 |
URI: | http://dyuthi.cusat.ac.in/purl/4121 |
Files | Size |
---|---|
Predicted impac ... zone management option.pdf | (2.465Mb) |
Abstract: | This paper highlights the prediction of learning disabilities (LD) in school-age children using rough set theory (RST) with an emphasis on application of data mining. In rough sets, data analysis start from a data table called an information system, which contains data about objects of interest, characterized in terms of attributes. These attributes consist of the properties of learning disabilities. By finding the relationship between these attributes, the redundant attributes can be eliminated and core attributes determined. Also, rule mining is performed in rough sets using the algorithm LEM1. The prediction of LD is accurately done by using Rosetta, the rough set tool kit for analysis of data. The result obtained from this study is compared with the output of a similar study conducted by us using Support Vector Machine (SVM) with Sequential Minimal Optimisation (SMO) algorithm. It is found that, using the concepts of reduct and global covering, we can easily predict the learning disabilities in children |
Description: | International Journal of Computer and Electrical Engineering, Vol.3, No.1, February, 2011 1793-8163 |
URI: | http://dyuthi.cusat.ac.in/purl/4194 |
Files | Size |
---|---|
Prediction of K ... ldren Using Rough Sets.pdf | (1.457Mb) |
Abstract: | This paper highlights the prediction of Learning Disabilities (LD) in school-age children using two classification methods, Support Vector Machine (SVM) and Decision Tree (DT), with an emphasis on applications of data mining. About 10% of children enrolled in school have a learning disability. Learning disability prediction in school age children is a very complicated task because it tends to be identified in elementary school where there is no one sign to be identified. By using any of the two classification methods, SVM and DT, we can easily and accurately predict LD in any child. Also, we can determine the merits and demerits of these two classifiers and the best one can be selected for the use in the relevant field. In this study, Sequential Minimal Optimization (SMO) algorithm is used in performing SVM and J48 algorithm is used in constructing decision trees. |
Description: | (IJCSIT) International Journal of Computer Science and Information Technologies, Vol. 2 (2) , 2011, 829-835 |
URI: | http://dyuthi.cusat.ac.in/purl/4202 |
Files | Size |
---|---|
Prediction of L ... SVM and Decision Tree.pdf | (385.3Kb) |
URI: | http://dyuthi.cusat.ac.in/purl/1302 |
Files | Size |
---|---|
Thomas M J 1988.PDF | (95.57Kb) |
Abstract: | HINDI |
Description: | DEPARTMENT OF HINDI COCHIN UNIVERSITY OF SCIENCE & TECHNOLOGY |
URI: | http://dyuthi.cusat.ac.in/purl/4843 |
Files | Size |
---|---|
Dyuthi-T1940.pdf | (5.363Mb) |
Abstract: | Spinel ferrites are commercially important because of their excellent magnetic and catalytic properties. The study by Low Energy Ion Scattering (LEIS) can reveal atomic scale information on the surface. The surface of selected spinel ferrites was investigated by LEIS. It has been found that it is the octahedral sites which are preferentially exposed on the surface of the spinel ferrites. So the probable planes which are exposed on spinel ferrite surfaces are D(110) or B(111). This prediction using LEIS gives scope for tailor-making compounds with catalytically active ions on the surface for various catalytic reactions. |
Description: | JOURNAL OF MATERIALS SCIENCE 34 (1999) 4279 – 4283 |
URI: | http://dyuthi.cusat.ac.in/purl/4404 |
Files | Size |
---|---|
Preferential ex ... pinel ferrite surfaces.pdf | (84.33Kb) |
Description: | Department of Hindi, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2963 |
Files | Size |
---|---|
Dyuthi-T0954.pdf | (1.187Mb) |
Abstract: | Hindi |
Description: | Dept. of Hindi Cochin University of Science & Technology |
URI: | http://dyuthi.cusat.ac.in/purl/4750 |
Files | Size |
---|---|
Dyuthi-T1847.pdf | (11.27Mb) |
Abstract: | Post purchase behaviour is the response of a consumer after purchasing a product. This is influenced by attitudes, product and dealer related factors, subjective norms and perceived behavioural control.Realising the significance of these factors on the marketing strategies of a product, the present research is undertaken to study the influence of these factors on the post purchase behaviour of consumers of pre owned cars in Kerala. This work also identifies the profile of pre-owned car consumers of Kerala. The specific objectives are a) To identify the demographic profile of consumers who purchased pre owned cars b) To study the relationship between product related factors and consumer attitude towards the purchase of pre owned cars c) to study the relationship between dealer related factors and consumer attitude towards the purchase of pre owned cars d) To analyse the relationship between consumers’ attitude and post purchase behavior e) To analyse the relationship between subjective norms and post purchase behavior and f) To analyse the relationship between perceived behavioural control and post purchase behaviour The study is confined to consumers who own and use pre owned cars purchased from authorised dealers in Kerala. The study was based on field research and made use of both primary and secondary data. Primary data were collected from 750 respondents distributed in five districts of Kerala. The study found that product and dealer related factors plays a vital role in shaping attitude of consumers towards pre owned cars which in turn influence the repurchase intention and decision to recommend to friends and relatives. Repurchase intention of pre owned car consumers are significantly influenced by the subjective norms and perceived behavioural control. This study would help marketers to understand the post purchase behaviour of pre owned car consumers and formulate the marketing strategies accordingly. |
URI: | http://dyuthi.cusat.ac.in/purl/5159 |
Files | Size |
---|---|
Dyuthi-T2193.pdf | (2.887Mb) |
Abstract: | There is an increasing demand for renewable energies due to the limited availability of fossil and nuclear fuels and due to growing environmental problems. Photovoltaic (PV) energy conversion has the potential to contribute significantly to the electrical energy generation in the future. Currently, the cost for photovoltaic systems is one of the main obstacles preventing production and application on a large scale. The photovoltaic research is now focused on the development of materials that will allow mass production without compromising on the conversion efficiencies. Among important selection criteria of PV material and in particular for thin films, are a suitable band gap, high absorption coefficient and reproducible deposition processes capable of large-volume and low cost production. The chalcopyrite semiconductor thin films such as Copper indium selenide and Copper indium sulphide are the materials that are being intensively investigated for lowering the cost of solar cells. Conversion efficiencies of 19 % have been reported for laboratory scale solar cell based on CuInSe2 and its alloys. The main objective of this thesis work is to optimise the growth conditions of materials suitable for the fabrication of solar cell, employing cost effective techniques. A typical heterojunction thin film solar cell consists of an absorber layer, buffer layer and transparent conducting contacts. The most appropriate techniques have been used for depositing these different layers, viz; chemical bath deposition for the window layer, flash evaporation and two-stage process for the absorber layer, and RF magnetron sputtering for the transparent conducting layer. Low cost experimental setups were fabricated for selenisation and sulphurisation experiments, and the magnetron gun for the RF sputtering was indigenously fabricated. The films thus grown were characterised using different tools. A powder X-ray diffractometer was used to analyse the crystalline nature of the films. The energy dispersive X-ray analysis (EDX) and scanning electron microscopy i (SEM) were used for evaluating the composition and morphology of the films. Optical properties were investigated using the UV-Vis-NIR spectrophotometer by recording the transmission/absorption spectra. The electrical properties were studied using the two probe and four probe electrical measurements. Nature of conductivity of the films was determined by thermoprobe and thermopower measurements. The deposition conditions and the process parameters were optimised based on these characterisations. |
URI: | http://dyuthi.cusat.ac.in/purl/665 |
Files | Size |
---|---|
Dyuthi-T0547.pdf | (3.353Mb) |
Abstract: | ABSTRACT: Phenol was chemically attached to low molecular weight chlorinated polyisobutylene and stearic acid respectively. These phenolic antioxidants were characterised by IR, 1H NMR and TGA. The efficiency and permanence of these bound antioxidants were compared with conventional antioxidants in natural rubber vulcanisates. The vulcanisates showed comparable ageing resistance in comparison to vulcanisates containing conventional antioxidants. The presence of liquid polymer bound phenol reduce the amount of plasticiser required for compounding. |
URI: | http://dyuthi.cusat.ac.in/purl/862 |
Files | Size |
---|---|
P B Sulekha and ... reparation and...,2003.PDF | (6.967Mb) |
Abstract: | The objectives of the proposed work are preparation of ceramic nickel zinc ferrite belonging to the series Ni1-XZnXFe2O4 with x varying from 0 to 1in steps of 0.2, structrural, magnetic and electrical characterization of Ni1-XZnXFe2O4, preparation and evaluation of Cure characteristics of Rubber Ferrite Composites (RFCs), magnetic characterization of RFCs using vibrating sample magnetometer (VSM), electrical characterization of RFCs and estimation of magnetostriction constant form HL parameters. The study deals with the structural and magnetic properties of ceramic fillers, variation of coercivity with composition and the variation of magnetization for different filler loadings are compared and correlated. The dielectric properties of ceramic Ni1-XZnXFe2O4 and rubber ferrite composites containing Ni1-XZnXFe2O4 were evaluated and the ac electrical conductivity (ac) of ceramic as well as composite samples can be calculated by using a simple relationship of the form ac = 2f tan 0r, with the data available from dielectric measurements. The results suggest that the ac electrical conductivity is directly proportional to the frequency |
URI: | http://dyuthi.cusat.ac.in/purl/1001 |
Files | Size |
---|---|
Dyuthi-T0206.pdf | (4.767Mb) |
Abstract: | Optimum conditions for the preparation of tape recording quality Y-Fe20 s by the thermal decomposition of ferrous oxalate dihydrate have been established. Formation of the intermediate F%O~ which is most important in forming Y-FezO 3 takes place only in the presence of water vapour. Various stages of decomposition have been characterised by DTA, TG, DTG, and x-ray powder diffraction. The method for the preparation of acicular "Y-Fe208 that matches very well with the commercial tape recording material has been developed |
Description: | Bull. Mater. Sei., Vol. 3, Number 2, July 1981, pp. 201-208 |
URI: | http://dyuthi.cusat.ac.in/purl/4396 |
Files | Size |
---|---|
Preparation and ... ape recording material.pdf | (374.1Kb) |
Abstract: | Present work deals with the Preparation and characterization of high-k aluminum oxide thin films by atomic layer deposition for gate dielectric applications.The ever-increasing demand for functionality and speed for semiconductor applications requires enhanced performance, which is achieved by the continuous miniaturization of CMOS dimensions. Because of this miniaturization, several parameters, such as the dielectric thickness, come within reach of their physical limit. As the required oxide thickness approaches the sub- l nm range, SiO 2 become unsuitable as a gate dielectric because its limited physical thickness results in excessive leakage current through the gate stack, affecting the long-term reliability of the device. This leakage issue is solved in the 45 mn technology node by the integration of high-k based gate dielectrics, as their higher k-value allows a physically thicker layer while targeting the same capacitance and Equivalent Oxide Thickness (EOT). Moreover, Intel announced that Atomic Layer Deposition (ALD) would be applied to grow these materials on the Si substrate. ALD is based on the sequential use of self-limiting surface reactions of a metallic and oxidizing precursor. This self-limiting feature allows control of material growth and properties at the atomic level, which makes ALD well-suited for the deposition of highly uniform and conformal layers in CMOS devices, even if these have challenging 3D topologies with high aspect-ratios. ALD has currently acquired the status of state-of-the-art and most preferred deposition technique, for producing nano layers of various materials of technological importance. This technique can be adapted to different situations where precision in thickness and perfection in structures are required, especially in the microelectronic scenario. |
Description: | Department of Instrumentation, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3034 |
Files | Size |
---|---|
Dyuthi-T1008.pdf | (7.059Mb) |
Description: | Department of Physics, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2328 |
Files | Size |
---|---|
Dyuthi-T0602.pdf | (22.61Mb) |
Abstract: | Use of short fibers as reinforcing fillers in rubber composites is on an increasing trend. They are popular due to the possibility of obtaining anisotropic properties, ease of processing and economy. In the preparation of these composites short fibers are incorporated on two roll mixing mills or in internal mixers. This is a high energy intensive time consuming process. This calls for developing less energy intensive and less time consuming processes for incorporation and distribution of short fibers in the rubber matrix. One method for this is to incorporate fibers in the latex stage. The present study is primarily to optimize the preparation of short fiber- natural rubber composite by latex stage compounding and to evaluate the resulting composites in terms of mechanical, dynamic mechanical and thermal properties. A synthetic fiber (Nylon) and a natural fiber (Coir) are used to evaluate the advantages of the processing through latex stage. To extract the full reinforcing potential of the coir fibers the macro fibers are converted to micro fibers through chemical and mechanical means. The thesis is presented in 7 chapters |
Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3680 |
Files | Size |
---|---|
Dyuthi-T1646.pdf | (7.242Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.