The principal objective of this study was to explore the compatibility of a blend of
two synthetic elastomers viz., ethylene-propylene-diene rubber (EPDM) and
chlorobutyl rubber (CIIR). Various commercial grades of EPDM were blended
with a specific grade of CIIR at different proportions. The mechanical properties such
as tensile strength, tear strength, ageing resistance, etc. were studied. On the basis of
the observed physical properties, two particular grades of EPDM were found to be compatible
with CIIR. Differential scanning calorimetry and scanning electron microscopy
confirmed the results. Chlorosulphonated polyethylene was added as a compatibilizing
agent to overcome the phase separation of the other two incompatible grades of EPDM
in blending with CIIR. The results revealed that the addition of compatibilizer greatly
improves the compatibility and thereby the properties of the blends.
Low-protein content natural rubber latex
was produced by using a nonionic surfactant-polyethylene
glycol (PEG). Extractable protein content of natural rubber
latex was found to decrease with PEG treatment and
reduction increased with increase in the molecular weight
of PEG. The low-protein latex samples were characterized
by tensile testing, Fourier transform infrared and thermogravimetric
analysis. The results have shown 35% reduction in the extractable protein content, without any compromise
on the mechanical properties of the latex; however,
thermal stability of low-protein latex was found to be
reduced marginally with PEG treatment.
Rani, Joseph(John Wiley & Sons. Inc, August 20, 1998)
[+]
[-]
Abstract:
ABSTRACT: Rubber seed oil was used as a multipurpose ingredient in natural rubber
(NR) and styrene butadiene rubber (SBR) compounds. The study shows that the oil,
when substituted for conventional plasticiser, imparts excellent mechanical properties
to NR and SBR vulcanizates. Further, it also improves aging resistance, reduces cure
time, increases abrasion resistance and flex resistance, and reduces blooming.
Rani, Joseph(John Wiley & Sons, Inc., March 20, 2000)
[+]
[-]
Abstract:
ABSTRACT: Zinc salts of ethyl, isopropyl, and butyl xanthates were prepared in the
laboratory. They were purified by reprecipitation and were characterized by IR, NMR,
and thermogravimetric analysis techniques. The melting points were also determined.
The rubber compounds with different xanthate accelerators were cured at temperatures
from 30 to 150°C. The sheets were molded and properties such as tensile strength,
tear strength, crosslink density, elongation at break, and modulus at 300% elongation
were evaluated. The properties showed that all three xanthate accelerators are effective
for room temperature curing.
Latex waste products contain rubber hydrocarbon of very high
quality, which is only lightly cross linked. Selected wastes such as thread waste
and glove waste were modified into processable materials by a novel economic
process and thermoplastic elastomers were prepared by blending these modified
waste materials with high density polyethylene in various proportions. The
mechanical properties as well as the rheological behaviour of these blends were
evaluated and compared with those of the natural rubber-high density
polyethylene blends.