Rani, Joseph(Gordon and Breach Science Publishers, Inc., May 20, 1985)
[+]
[-]
Abstract:
Polychloroprene (neoprene) has been blended with polyvinylchloride (PVC) in different
proportions using a new stabiliser system (magnesium oxide and zinc oxide with
stearic acid) for PVC. The physical properties of the blends show that they can
advantageously replace neoprene in many applications.
Rani, Joseph(Gordon and Breach Science Publishers, Inc., August 30, 1985)
[+]
[-]
Abstract:
Blends of natural rubber (NR) with styrene-butadiene rubber (SBR), polybutadiene
rubber (BR), ethylene-propylene terpolymer (EPDM) and acrylonitrile-butadiene
rubber (NBR) were vulcanised using an efficient vulcanisation (EV) system and a
semi-EV system. Compatible blends show a definite pattern of curing whereas the
incompatible blends show no such pattern.
Studies conducted on butadiene-acrylonitrile copolymer (NBR)/poly(vinyl chloride) (PVC)
blends at different temperatures indicate that an optimum temperature exists for the formation
of a particular blend. The mechanical properties of the blends confirm this observation.
PVC stabilizer based on, magnesium oxide , zinc oxide, and stearic acid was found to be very
useful in NBR/PVC blends.
Rani, Joseph(Huthig & Wepf Verlag, Basel, April 29, 1986)
[+]
[-]
Abstract:
Tribasic lead sulphate is tried as a practical curing agent for polychloroprene. The
cure characteristics of the compounds as well as the technical properties of the
vulcanizates show that it can act as a potential curative.
Rani, Joseph(Hitthig & Wepf Verlag, Basel, October 13, 1986)
[+]
[-]
Abstract:
A carbon black filled 50/50 natural rubber (NR)/styrene-butadiene rubber (SBR)
blend is vulcanized using several conventional curing systems designed by varying the
amounts of sulphur and accelerator. The cure characteristics and the properties of the
vulcanizates are compared. The quantity and quality of crosslinks in each case are
evaluated by chemical probes to correlate them with the properties.
Rani, Joseph(Gordon and Breach Science Publishers, Inc., November 13, 1986)
[+]
[-]
Abstract:
A carbon black filled 50/50 Natural Rubber (NR)/Polybutadiene Rubber (BR) blend
is vulcanized using several conventional systems designed by varying the amounts of
sulphur and accelerator . The cure characteristics and the vulcanizate properties are
compared. The quality and quantity of crosslinks in each case are deciphered by
chemical probes to correlate them with the vulcanizate properties.
Rani, Joseph(Gordon and Breach Science Publishers, Inc., November 28, 1986)
[+]
[-]
Abstract:
Polymer-solvent interaction parameters for the blends of natural rubber (NR) with
styrene-butadiene rubber (SBR) and polybutadiene rubber ( BR) are calculated using
the Flory-Rehner equation by equating the network density of the vulcanizates in
two solvents.
Rani, Joseph(HUthig & Wepf Verlag Basel, December 12, 1986)
[+]
[-]
Abstract:
Blends of polychloroprene rubber and plasticized polyvinylchloride have been prepared
in various compositions and their properties evaluated. The properties of the
blends show that they can be used to replace polychloroprene in many applications
Natural rubber, styrene-butadiene rubber, and polybutadiene
rubber were used to replace part of the butadieneacrylonitrile
rubber in a 70/30 butadiene-acrylonitrile rubber/
poly(vinyl chloride) blend. Such replacement up to 15%
of the total weight of the blend improved the mechanical
properties, while decreasing the cost of the blend. Styrenebutadiene
rubber could replace butadiene-acrylonitrile
rubber up to 30% of the total weight of the blend without
deterioration in the mechanical properties.
Rani, Joseph(Hutig & Wepf Verlag,Basel, October 5, 1987)
[+]
[-]
Abstract:
Compounding of styrene-butadiene copolymer/polybutadiene , natural rubber/
ethylene-propylene-diene terpolymer and natural rubber/butadiene-acrylonitrile copolymer
blends was done in three different ways and their curing behaviour and the
tensile properties of the es are compared.
Blends of 50/50 natural rubber (NR) and styrene-butadiene rubber (SBR) are vulcanized using
several conventional and semi-EV systems. The cure characteristics and vulcanizate properties
are compared. The quantity and quality of crosslinks in each case are deciphered by chemical
probes to correlate them with the vulcanizate properties.
Rani, Joseph(Huthig & Wepf Verlag, Basel, June 5, 1991)
[+]
[-]
Abstract:
Antioxidants were attached to hydroxy-terminated liquid natural rubber by modified
Friedel-Crafts alkylation reaction using anhydrous zinc chloride as catalyst. The rubber
bound antioxidants were found to be less volatile and less extractable compared to
conventional antioxidants. The bound antioxidants were tried both in latex compounds
and dry rubber compounds. The vulcanizates showed improved ageing resistance
compared to vulcanizates based on conventional antioxidants.
Sunil,K Narayanankutty(Elsevier Science Publishers Ltd., August 29, 1991)
[+]
[-]
Abstract:
The thermal degradation of short kevlar fibre-thermoplastic polyurethane
(TPU) composites has been studied by Thermogravimetric Analysis (TGA)
and Differential Scanning Calorimetry (DSC). TGA showed that the thermal
degradation of TPU takes place in two steps with peak maxima (T1max and
T2ma,) at 383°C and 448°C, respectively. In the presence of 10-40 phr of short
kevlar fibres, T1_ and T2max were shifted to lower temperatures. The
temperature of onset of degradation was increased from 245 to 255°C at 40
parts per hundred rubber (phr) fibre loading. Kinetic studies showed that the
degradation of TPU and kevlar-TPU composite follows first-order reaction
kinetics. The DSC study showed that there is an improvement in thermal
stability of TPU in the presence of 20 phr of short kevlar fibres.
Sunil,K Narayanankutty(Gordon and Breach Science Publishers, December 10, 1991)
[+]
[-]
Abstract:
Tear and wear properties of short kevlar fiber, thermoplastic polcurethane (TPU) composite with
respect to fiber loading-and fiber onentation has been studied and the fracture surfaces were examined
under scanning electron microscope (SEM). Tear strength first decreased up to 20 phr fiber loading
and then gradually increased with increasing fiber loading. Anisotropy in tear strength was evident
beyond a fiber loading of 20 phr. Tear fracture surface of unfilled TPU showed sinusoidal folding
characteristics of high strength matrix. At low fiber loading the tear failure was mainly due to fibermatrix failure whereas at higher fiber loading the failure occurred by fiber breakage. Abrasion loss
shows a continuous rise with increasing fiber loading, the loss in the transverse orientation of fibers
being higher than that in the longitudinal orientation. The abraded surface showed lone cracks and
ridges parallel to the direction of abrasion indicating an abrasive wear mechanism. In the presence of
fber the abrasion loss was mainly due to fiber low.
Rani, Joseph; Jayamma,Francis; George,K E(Pergamon Press Ltd, December 18, 1991)
[+]
[-]
Abstract:
The effects of modifying blends of poly(vinyl chloride) (PVC) with linear low density
polyethylene (LLDPE) by means of acrylic acid, maleic anhydride, phenolic resins and p-phenylene
diamine were investigated. Modification by acrylic acid and maleic anhydride in the presence of dicumyl
peroxide was found to be the most useful procedure for improving the mechanical behaviour and adhesion
properties of the blend. The improvement was found to be due mainly to the grafting of the carboxylic
acid to the polymer chains; grafting was found to be more effective in LLDPE/PVC blends than in pure
LLDPE.
The effect of an external flaw on the tensile strength of short kevlar fiber-thermoplastic
composites has been studied with respect to fiber content, fiber orientation,
location of the external flaw, and the temperature of test. The composites showed
a three-step reduction in tensile strength with increasing flaw size. The critical flaw-length
region was shifted to higher flaw-size levels with increasing fiber content. With increasing
temperature, the critical flaw length was increased in the case of unfilled TPU, whereas it
remained more or less constant in the case of short kevlar fiber-filled-TPU composite.
The effect of various processing parameters, such as nip gap, friction ratio
and roll temperature, on the tensile properties of short Kevlar aramid
fibre-thermoplastic polyurethane composite has been investigated and the tensile
and tear fracture surfaces have been characterised using a scanning electron microscope.
A nip gap of 0.45 mm, a friction ratio of 1.15 and a roll temperature of 62°C
was found to give optimum mechanical properties. Scanning electron microscopy
study revealed a higher extent of fibre orientation in the milling direction in the
above condition.
Sunil,K Narayanankutty(Technomic Publishing Co., Inc., June 1, 1992)
[+]
[-]
Abstract:
The flammability of short Kevlar aramide fiber-thermoplastic
polyurethane (TPU) has been investigated with respect to fiber loading and
various flame retardant additives such as halogen containing polymers, antimony
oxide/chlorine donor combination, zinc borate, and aluminum hydroxide.
Smoke generation was reduced drastically, while the oxygen index was reduced
marginally in the presence of short fibers. The best improvement in the oxygen
index was obtained with antimony oxide/chlorinated paraffin wax combination,
in the weight ratio 1:6. A 70 phr loading of aluminum hydroxide improved LOI
and reduced smoke generation.