Girijavallabhan, C P; Radhakrishnan, P; V P N Nampoori; Geetha, K; Rajesh, M(Journal of Optics A: Pure and Applied Optics, Institute of Physics Publishing, January 13, 2006)
[+]
[-]
Abstract:
We present a compact solid-state laser based on leaky mode propagation
from a dye-doped polymer free-standing film waveguide. The edge emitted
spectrum clearly indicated the existence of periodic resonant modes. The
reflections from the lateral faces of the free-standing film provided the
optical feedback thus giving rise to a Fabry–Perot like optical cavity. This
together with the guidance through the gain medium gave rise to intense
narrow emission lines. For a pump energy of 1.82 mJ/pulse, an intense line
with FWHM ∼0.4 nmwas observed at 576.5 nm.
Rajesh, M; Geetha, K; Sheeba, M; Radhakrishnan, P; Vallabhan, C P G; Nampoori, V P N(Elsevier, May , 2006)
[+]
[-]
Abstract:
A simple, effective and inexpensive fiber optic sensor for investigating the setting characteristics of various grades of cement is described. A finite length of unsheathed multimode optical fiber laid inside the cement mix, is subjected to stress during the setting process. The microbends created on the fiber due to this stress directly influence the intensity of light propagating through the fiber. Continuous monitoring of such variations in the light output transmitted through the fiber gives a clear measure of the setting characteristics of the cement mix, thus providing a simple and elegant technique of great practical importance in the field of civil engineering. The smart fiber optic sensor described above can be incorporated into a building during the construction process itself so that continuous monitoring of the deterioration process for the entire life time of the building can be carried out.
Rajesh, M; Geetha, K; Sheeba, M; Radhakrishnan, P; Nampoori, V P N; Vallabhan, C P G(Society of Photo-Optical Instrumentation Engineers, July , 2006)
[+]
[-]
Abstract:
The length-dependent tuning of the fluorescence spectra of a dye doped polymer fiber is reported. The fiber is pumped sideways and the fluorescence is measured from one of the ends. The excitation of a finite length of dye doped fiber is done by a diode pumped solid state laser at a wavelength of 532 nm. The fluorescence emission is measured at various positions of the fiber starting from a position closer to the pumping region and then progressing toward the other end of the fiber. We observe that the optical loss coefficients for shorter and longer distances of propagation through the dye doped fiber are different. At longer distances of propagation, a decrease in optical loss coefficient is observed. The fluorescence peaks exhibit a redshift of 12 nm from 589 to 610 nm as the point of illumination progresses toward the detector end. This is attributed to the self-absorption and re-emission of the laser dye in the fiber.
Geetha, K; Rajesh, M; Nampoori, V P N; Vallabhan, C P G; Radhakrishnan, P(Optical Society of America, 2006)
[+]
[-]
Abstract:
The propagation characteristics of amplified spontaneous emission (ASE) through a rhodamine 6 G-doped polymethyl methacrylate freestanding film waveguide were studied. This was done by shifting the excitation stripe horizontally along a transversely pumped waveguide. By this method, we could tune the ASE wavelength. The maximum tunability thus obtained was ~18 nm with a pump stripe length of 6 mm.