Chandran, A R; Gopikrishna, M; Aanandan, C K; Mohanan, P; Vasudevan, K(Progress In Electromagnetics Research, 2007)
[+]
[-]
Abstract:
The scattering behaviour of fractal based metallodielectric structures loaded over metallic targets of different shapes such as flat plate, cylinder and dihedral corner reflector are investigated for both TE and TM polarizations of the incident wave. Out of the various fractal structures studied,square Sierpinski carpet structure is found to give backscattering reduction for an appreciable range of frequencies. The frequency of minimum backscattering depends on the geometry of the structure as well as on the thickness of the substrate. This structure when loaded over a dihedral corner reflector is showing an enhancement in RCS for corner angles other than 90◦.
Biju,Kumar; Raveendranath,U; Mohanan,P; Mathew,K T; Hajian,M; Ligthart,L P(Microwave and Optical Technology Letters, July 20, 2000)
[+]
[-]
Abstract:
A simple and efficient method for determining the complex
permittivity of dielectric materials from both reflected and transmitted signals is presented. It is also novel because the technique is implemented using two pyramidal horns without any focusing mechanisms. The dielectric constant of a noninteractive and distributive (NID) mixture of dielectrics is also determined
Vermeeren,G; Rogier,H; Olyslager,F; Zutter De,D(IEE Electronics letters,UK, September 13, 2001)
[+]
[-]
Abstract:
A single-feed rectangular-ring microstrip antenna is proposed for
indoor communication under the Bluetooth protocol. The
dimensions of the antenna together with the location of the feed
point are optimized through field simulations in order to cover the
Bluetooth bandwidth and to avoid linear polarization. The
performance and the efficiency of the antenna are illustrated in a
real indoor environment
Hsieh,Gui-Bin; Chen,Ming-Huang; Wong,Kin-Lu Wong(IEE Electronics letters,UK, June 21, 2001)
[+]
[-]
Abstract:
A novel technique for obtaining dual-hand circular polarization
(CP) radiation of a single-feed circular microstrip antenna in
proposed and demonstrated. By embedding two pain of arc shaped
slots of proper lengths close to the boundary of a circular
patch, and protruding one of the arc-shaped slots with a narrow
slit, the circular microstrip antenna can perform dual-hand CP
radiation using a single probe feed. Details of the antenna design
Binoy,G S; Aanandan,C K; Mohanan,P; Vasudevan,K(Microwave and Optical Technology Letters, June 20, 2000)
[+]
[-]
Abstract:
A novel dual frequency dual-polarized square microstrip
patch antenna embedded with a slot is presented. The proposed
antenna offers tunability of the frequency ratio between the two
frequencies by adjusting the slot dimensions. This configuration
also provides a size reduction up to -51 and 35% for the two modes
as compared to a square micro strip patch antenna
Binoy,G S; Aanandan,C K; Mohanan,P; Vasudevan,K(Microwave Engineering Group,Department of Electronics, January 5, 2002)
[+]
[-]
Abstract:
A novel dual frequency design of a square microstrip antenna coaxially
fed along the diagonal with a chip capacitor mounted at the bottom of
the stub is introduced. This design provides enhanced area reduction and
good cross-polarization levels. The antenna design can be used as a compact
antenna system where limited size is a major requirement. The details of the
antenna design and experimental results are presented
Sona,Kundukulam O; Manju,Paulson; Aanandan,C K; Mohanan,P(Microwave and Optical Technology Letters, December 5, 2001)
[+]
[-]
Abstract:
Dual frequency operation is achieved from a compact
microstrip antenna by loading a pair of narrow slots close to its radiating
edges. The two frequencies have parallel polarization planes and similar
radiation characteristics. The ratio between the two operating frequencies
can be tuned in the range (1.14-1. 24), which is much smaller than that
of similar designs. The above excellent radiation characteristics are
achieved along with an area reduction of - 75% compared to the
standard rectangular patch
Jitha, B; Nimisha, C S; Anandan, C K; Mohanan, P; Vasudevan, K(John Wiley & Sons, July , 2006)
[+]
[-]
Abstract:
The use of a split-ring resonator (SRR)-loaded waveguide for the design of a band-rejection filter with adjustable bandwidth is reported. The width of the stopband can be adjusted by suitably positioning the SRR array in the waveguide. The rejection band can be made very narrow by placing the array at the electric-field minimum. The stopband attenuation depends on the number of unit cells in the array.
Jianlang,Li; Liren,Liu; Yingchun,Guo; Huaisheng,Wang; Changhe,Zhou(Microwave and Optical Technology Letters, December 20, 1999)
[+]
[-]
Abstract:
The transient interaction between a refraction index grating
and light beams during simultaneous writing and thermal fixing of
a photorefractive hologram is investigated. With a diffusion- and
photovoltaic-dominated carrier transport mechanism and carrier thermal
activation (temperature dependent) considered in Fe:LiNbO3 crystal, from
the standpoint of field-material coupling, the theoretical thermal fixing
time and the space-charge field buildup, spatial distribution, and temperature
dependence are given numerically by combining the band transport
model with mobile ions with the coupled-wave equation
K G Nair; Mohanan, P; Stephen, Rodrigues(Department of Electronics, 1991)
[+]
[-]
Abstract:
Design and development of a new feed -horn antenna
with low sidelobe levels is reported . The E-walls of this
antenna are fabricated with low -loss dielectric substrate , periodically
loaded with thin conducting strips . The antenna is found
to be simulating the radiation characteristics of metallic corrugated
horns . This can be an ideal substitute for metallic corrugated
horns with added advantages like light -weight and low
production cost.
Mohanan, P; K G Nair; Stephen, Rodrigues(Department of Electronics, November , 1991)
[+]
[-]
Abstract:
Design and development of a new feed -horn antenna
with low sidelobe levels is reported . The E-walls of this
antenna are fabricated with low -loss dielectric substrate , periodically
loaded with thin conducting strips . The antenna is found
to be simulating the radiation characteristics of metallic corrugated
horns . This can be an ideal substitute for metallic corrugated
horns with added advantages like light -weight and low
production cost.
Design and development of a new feed -horn antenna
with low sidelobe levels is reported . The E-walls of this
antenna are fabricated with low -loss dielectric substrate ,
periodicallyloaded with thin conducting strips . The antenna
is found to be simulating the radiation characteristics of metallic
Corrugated horns . This can be an ideal substitute for metallic
Corrugated horns with added advantages like light -weight and low
production cost
Joseph, V P; Biju Kumar, S; Mathew, K T(John Wiley & Sons, April 5, 2001)
[+]
[-]
Abstract:
The radiation characteristics of a new type of hollow dielectric H-plane sectoral horn antenna are presented. Metallic strips of optimum length are loaded on the H-walls of the sectoral horns. The effects of strip loading for producing square patterns in the H plane are discussed.
The (Ba1-x Srx) (Nd1/2, Nb1/2) O3 ceramics have been prepared by the conventional
ceramic route for different values of x. Addition of a small amount of
CeO2(1 wt%) as a sintering aid increased the density of the samples. The structure
and microstructure of the sintered samples are studied by X-ray diffraction
and SEM methods. The dielectric properties of the samples are measured in the
microwave frequency region as a function of composition. The dielectric constant
decreases as x increases. The coefficient of thermal variation of resonant
frequency decreases as the Sr content increases and goes to the negative side.
The dielectric properties of (Ba1-x Srx) (Nd1/2, Nb1/2) O3 are in the range suitable
for application as dielectric resonators in microwave circuits
Pazhoor Bijumon, Varghese; Mohanan, P; Mailadil, Thomas Sebastian(The Japan Society of Applied Physics, 2002)
[+]
[-]
Abstract:
Microwave ceramic dielectric materials Ca5Nb2TiO12 and Ca5Ta2TiO12 have been prepared by a conventional solid-state
ceramic process. The structure was studied by X-ray diffraction and the dielectric properties were characterized at microwave
frequencies. The ceramics posses a relatively high dielectric constant, very low dielectric loss (Q5 x f > 30000GHz) and
small temperature variation of resonant frequency. These materials are potential candidates for dielectric resonator
applications in microwave integrated circuits. [DOI: 10. 1 143/JJAP.41.3834]
Dielectric ceramics based on solid solution phases of [RE1_x= REr]TiNb06, where REI_s = Nd, Pr, Sm and RE' = Dy, Gd and Y, were prepared by the conventional solid-state ceramic route for values of x. The ceramic samples are characterized by X-ray diffraction and microwave methods. Ceramics based on RE (Pr, Nd and Sm) belonging to aeschynite group shows positive value of Tf and those based on RE (Gd, Dy and Y) belonging to euxenite group show negative value of r f. The solid solution phases between the aeschynite and the euxenite group shows intermediate dielectric constant and r f values. The results indicate the possibility of tailoring the dielectric properties by varying the composition of the solid solution phases. The range of solid solubility of euxenite in aeschenite and aeschenite
in euxenite are different for different rare earth ions
Ceramic dielectric resonators in the BaO-RE2O3-TiO2 (RE = rare earth) system have been
prepared by the conventional solid state ceramic route. The dielectric properties have been
tailored by substitution of different rare earth oxides and by bismuth oxide addition. The
dielectric constants increased with Bi addition whereas the 0 decreased. The temperature
coefficient of the resonant frequency improved with bismuth addition