K G Nair; Aanandan,C K; Mohanan,P; Supriyo,Dey(Department of Electronics, 1994)
[+]
[-]
Abstract:
A simple technique to improve the impedance bandwidth of a circular
microstrip patch antenna using two sectorial slots is proposed. Using this
design more than 5% impedance bandwidth is obtained. The added
advantage of this new antenna is that it can be fed by a 50microstrip
line
K G Nair; Mohanan, P; Stephen, Rodrigues(Department of Electronics, 1991)
[+]
[-]
Abstract:
Design and development of a new feed -horn antenna
with low sidelobe levels is reported . The E-walls of this
antenna are fabricated with low -loss dielectric substrate , periodically
loaded with thin conducting strips . The antenna is found
to be simulating the radiation characteristics of metallic corrugated
horns . This can be an ideal substitute for metallic corrugated
horns with added advantages like light -weight and low
production cost.
K G Nair; Aanandan,C K; Mohanan,P(Department of Electronics, 1990)
[+]
[-]
Abstract:
A microstrip antenna with large bandwidth is developed
using a parasitic technique. Compared to the available wide-band antenaas,
the proposed antenna structure Is very compact and gives a less
distorted radiation pattern with frequency . An impedance bandwidth,
eight times that of a conventional patch antenna of the same size, Is
achieved. The concept of coupled microstrip line model is extended for
theoretical interpretation of the impedance Loci
K G Nair; Aanandan,C K; Mohanan,P; Jacob,George(Department of Electronics, 1998)
[+]
[-]
Abstract:
Abstract-A new compact microstrip antenna element is analyzed.
The analysis can accurately predict the resonant frequency,
input impedance, and radiation patterns. The predicted results
are compared with experimental results and excellent agreement
is observed . These antenna elements are more suitable in applications
where limited antenna real estate is available.
K G Nair; Aanandan,C K; Mohanan,P; Supriyo,Dey(Department of Electronics, February 3, 1994)
[+]
[-]
Abstract:
The closed form expression for the radiated power of a half-wave
microstrip patch is modified to calculate the impedance
bandwidth of a printed dipole. Analyses of cavity backed flared
and end-loaded printed dipoles are presented
K G Nair; Aanandan,C K; Mohanan,P(Department of Electronics, October , 1992)
[+]
[-]
Abstract:
Reduction of radar cross -section of dihedral corner reflectors using
simulated corrugated surface (SCS) is reported. The technique is
found to be more effective in the reduction of RCS or corner reflectors
for normal incidence . A typical reduction of 40-50 dB is
achieved using this method.
K G Nair; Aanandan,C K; Mohanan,P; Deepukumar,M; George,J(Department of Electronics, August 15, 1996)
[+]
[-]
Abstract:
A new dual port microstrip antenna geometry for dual frequency
operation is presented. The structure consists of the intersection
of two circles of the same radius with their centres displaced by a
small fraction of the wavelength . This antenna provides wide
impedance bandwidth and excellent isolation between its ports.
The gain of the antenna is comparable to that of a standard
circular microstrip antenna operating at the same resonant
frequency. A theoretical analysis for calculating the resonant
frequencies of the two ports is also presented