Abstract: | Scholarly communication over the past 10 to 15 years has gained a tremendous momentum with the advent of Internet and the World Wide Web. The web has transformed the ways by which people search, find, use and communicate information. Innovations in web technology since 2005 have brought out an array of new services and facilities and an enhanced version of the web named Web 2.0. Web 2.0 facilitates a collaborative environment in which the information users can interact with the information. Web 2.0 enables its users to create, annotate, review, share re-use and represent the information in new ways thereby optimizing the information dissemination |
URI: | http://dyuthi.cusat.ac.in/purl/3982 |
Files | Size |
---|---|
Managing Schola ... ofUniversity Libraries.pdf | (162.8Kb) |
Abstract: | The textile industry is one amongst the rapidly growing industries world wide, which utilizes enormous amounts of synthetic dyes. Consequently, the effluent from these textile industries poses serious threat to the environment which is often very difficult to treat and dispose. This has become a very grave problem in environment conservation and hence natural pigments have drawn the attention of industry as safe alternative. In this context, in the present study an attempt was made to bioprospect marine bacteria towards isolation of a suitable and ideal pigment that could be used as a natural dye. A marine Serratia sp. BTWJ8 was recognized to synthesize enormous amounts of a prodigiosin-like pigment. The pigment was isolated and characterized for various properties. The pigment was evaluated for application as a dye in the textile industry. Results of the studies indicated that this pigment could be used as a natural dye for imparting red-yellow colour to various grades of textile materials. The colour was observed to be stable after wash performance studies |
Description: | Proc. Internatl. Conf. Biodiv. Conserv. & Mgt., 2008 : 743 - 4. |
URI: | http://dyuthi.cusat.ac.in/purl/4270 |
Files | Size |
---|---|
Marine Bacteria ... ye In Textile Industry.pdf | (330.1Kb) |
Abstract: | Prodigiosin is known for its immunomodulatory, antibacterial, antimycotic, antimalarial, algicidal and anticancer activities. Here, we reported the evaluation of prodigiosin pigment as a dyeing agent in rubber latex, paper and polymethyl methacrylate (PMMA) so that it can be considered as an alternative to synthetic pigments. Maximum color shade was obtained in rubber sheet prepared with 0.5 parts per hundred gram of rubber (phr) pigment and PMMA sheet incorporated with 0.08 μg pigment. Results indicate scope for utilization of prodigiosin as dye for PMMA and rubber and also prodigiosin dyed paper as a pH indicator. Further, being a natural and water insoluble pigment, it is ecofriendly |
Description: | African Journal of Biotechnology Vol. 12(17), pp. 2266-2269, 24 April, 2013 |
URI: | http://dyuthi.cusat.ac.in/purl/4263 |
Files | Size |
---|---|
Marine bacteria ... ylate sheets and paper.pdf | (156.6Kb) |
Abstract: | marine bacterium, Micrococcus MCCB 104, isolated from hatchery water, demonstrated extracellular antagonistic properties against Vibrio alginolyticus, V. parahaemolyticus, V. vulnificus, V. fluviallis, V. nereis, V. proteolyticus, V. mediterranei, V. cholerae and Aeromonas sp., bacteria associated with Macrobrachium rosenbergii larval rearing systems. The isolate inhibited the growth of V. alginolyticus during co-culture. The antagonistic component of the extracellular product was heat-stable and insensitive to proteases, lipase, catalase and α-amylase. Micrococcus MCCB 104 was demonstrated to be non-pathogenic to M. rosenbergii larvae |
Description: | DISEASES OF AQUATIC ORGANISMS (Dis Aquat Org)Vol. 68: 39–45, 2005 |
URI: | http://dyuthi.cusat.ac.in/purl/4037 |
Files | Size |
---|---|
A marine bacter ... larvalrearing systems.pdf | (120.0Kb) |
Abstract: | 3.4. Lipase (EC-3.1. 1.3) 3.5. Other Known Enzymes 3.6. Extremozymes (Enzymes from extremophiles) 3.7. Recognition of Valuable Extremozymes 4. Enzymes as Tools in Biotechnology 4.1. Restriction Enzymes from Marine Bacteria 4.2. Other Nucleases from Marine Bacteria 4.3. Bacteriolytic Enzyme by Bacteriophage from Seawater 5. Innovations in Enzyme Technology 5.1. Enzyme Engineering 5.2. Immobilization Technology 5.3. Gene Cloning for Marine Enzymes 6. Future Prospects |
Description: | Biotechnology vol 9,pp 1-15 |
URI: | http://dyuthi.cusat.ac.in/purl/4255 |
Files | Size |
---|---|
Marine Microbial Enzymes.pdf | (493.5Kb) |
Abstract: | In the backdrop of issues encountered by the marine product exports from Kerala in the traditional strongholds of the European Union and the United States, there is a need to target newer markets. The ASEAN India Trade in Goods Agreement (TIGA) though proposes to liberalize trade between India and the ASEAN member nations, fails to deliver greater market access for our marine products in the markets of the ASEAN nations. This can be attributed to factors such as the lower prevailing MFN base rate in the ASEAN nations, tariff reduction commitments reciprocated by them being lesser than India’s offers, inclusion of our prominent items of export in the restrictive lists of most of the ASEAN nations etc. Export forecast suggests that this is a market to be reckoned, which in turn stipulates the need to secure greater concessions and preferential treatment for our marine product exports in the ASEAN nations to capitalize on the gains that have been made |
Description: | Journal of Economics and Sustainable Development,Vol.3, No.7, 2012 |
URI: | http://dyuthi.cusat.ac.in/purl/4590 |
Files | Size |
---|---|
Marine Product ... ilities and Challenges.pdf | (388.4Kb) |
Abstract: | Yeasts are ubiquitous in their distribution and populations mainly depend on the type and concentration of organic materials. The distribution of species, as well as their numbers and metabolic characteristics were found to be governed by existing environmental conditions. Marine yeasts were first discovered from the Atlantic Ocean and following this discovery, yeasts were isolated from different sources, viz. seawater, marine deposits, seaweeds, fish, marine mammals and sea birds. Nearshore environments are usually inhabited by tens to thousands of cells per litre of water, whereas low organic surface to deep-sea oceanic regions contain 10 or fewer cells/litre. Aerobic forms are found more in clean waters and fermentative forms in polluted waters. Yeasts are more abundant in silty muds than in sandy sediments. The isolation frequency of yeasts fell as the depth of the sampling site is increased. Major genera isolated in this study were Candida, Cryptococcus, Debaryomyces and Rhodotorula. For biomass estimation ergosterol method was used. Classification and identification of yeasts were performed using different criteria, i.e. morphology, sexual reproduction and physiological/biochemical characteristics. Fatty acid profiling or molecular sequencing of the IGS and ITS regions and 28S gene rDNA ensured accurate identification. |
URI: | http://dyuthi.cusat.ac.in/xmlui/purl/2035 |
Files | Size |
---|---|
Marine yeasts-a rewiew.pdf | (214.2Kb) |
Abstract: | A lucrative export market and high domestic demand has made ornamental fish industry in West Bengal a potential source for income generation. The study aimed to identify: (i) the commercially important size groups of main ornamental fish varieties available in the state; (ii) the existing supply chain; (iii) major constraints for development of the industry; (iv) and to anlayse price spread of commercially important varieties; and (v) to evaluate the profitability of operation at different stakeholder levels in the marketing chain. Export market of ornamental fishes in the state followed a single supply channel while three different distribution channels existed in the domestic market. High electricity charges was the major problem faced by breeders (producers/rearers) whereas lack of technical knowledge regarding transportation was the major constraint for wholesalers. Lack of knowledge on proper health management inhibited the growth of retail industry. The fresh water catfish, angel, molly, arowana, gold fish, tetras, and gouramis showed comparatively higher breeders’ share in consumers’ rupee. Wholesalers were earning comparatively higher annual profit than the other stakeholders due to moderate initial investment and also due to the comparatively lower risk involved. |
Description: | Fishery Technology 2011, Vol. 48(2) pp : 163 - 170 |
URI: | http://dyuthi.cusat.ac.in/purl/4130 |
Files | Size |
---|---|
Marketing Chann ... sh Trade inWest Bengal.pdf | (534.2Kb) |
Abstract: | Marketing of information services is now an important goal of librarians all over the ~orld t? attract mor~ users to the libr~ry. thereby promoting user satisfaction. Marketing IS considered ~s ~n Integr~1 part of libraries and information centres mainly due to the developments In information t.echnology, information explosion, and declining library budgets. Kotler defines marketing as the "analysis, planning, implementation and control o~ carefully formulated programs designed to bring about voluntary exchanges of values WIth target markets fo~ the ~~rpos~ of~chievingorganizational objectives". Organizations suc.h as museums, unrversittes, libraries, and charities need to market their causes and their products to gain. political and social support as well as economic support (Kotler, 1995). In the marketing world people are now migrating from the traditional Four P ~lodelto th~ S~VE mode! (Alt~ns~n, 2013). According to the SAVE model, marketing III an orgarusanon must grve pnonty to 'Solutions' instead of the features or functions of~he.'Product" Similarily it is to focus on 'Access', instead of ,Place'; 'Value' instead of Price" so that the benefits are more stressed, rather than production costs. Instead of :Proliloti.on', marketi~g has. to conc~ntrate on 'Educating' the customers, providing lJlfo~mahol~ about t~eJr specific req~lrements, instead of relying on advertising, public rel~tlons, direct selling etc. From a library point ofview, to ensure maximum utilization of library ~ervices there is an increasing need for definite marketing plans to exploit the techn.ologlcal dcvelop",len~s so ~s to entice the users. By anticipating their changing needs and ~y co.mmulllcatl~g WIth them it should be possible to devise strategies to present various library services and products in a perceptive style. |
Description: | E-Infrastructure In Libraries,2013 |
URI: | http://dyuthi.cusat.ac.in/purl/3983 |
Files | Size |
---|---|
Marketing of Li ... anAcademic Environment.pdf | (1.292Mb) |
Abstract: | Two distinct nitrifying bacterial consortia, namely an ammonia oxidizing non-penaeid culture (AMO NPCU-1) and an ammonia oxidizing penaeid culture (AMOPCU-1), have been mass produced in a nitrifying bacterial consortia production unit (NBCPU). The consortia, maintained at 4 C were activated and cultured in a 2 l fermentor initially. At this stage the net biomass (0.105 and 0.112 g/l), maximum specific growth rate (0.112 and 0.105/h) and yield coefficients (1.315 and 2.08) were calculated respectively, for AMONPCU-1 and AMOPCU-1 on attaining stationary growth phase. Subsequently on mass production in a 200 l NBCPU under optimized culture conditions, the total amounts of NH4 ?–N removed by AMONPCU-1 and AMOPCU-1 were 1.948 and 1.242 g/l within 160 and 270 days, respectively. Total alkalinity reduction of 11.7–14.4 and 7.5–9.1 g/l were observed which led to the consumption of 78 and 62 g Na2CO3. The yield coefficient and biomass of AMONPCU-1 were 0.67 and 125.3 g/l and those of AMOPCU-1 were 1.23 and 165 g/l. The higher yield coefficient and growth rate of AMOPCU-1 suggest better energy conversion efficiency and higher CO2 fixation potential. Both of the consortia were dominated by Nitrosomonas-like organisms. The consortia may find application in the establishment of nitrification within marine and brackish water culture systems. |
Description: | World J Microbiol Biotechnol (2009) 25:407–414 DOI 10.1007/s11274-008-9905-1 |
URI: | http://dyuthi.cusat.ac.in/purl/4046 |
Files | Size |
---|---|
Mass production ... ng aquaculture systems.pdf | (377.2Kb) |
Abstract: | The focus of this paper is to develop computationally efficient mathematical morphology operators on hypergraphs. To this aim we consider lattice structures on hypergraphs on which we build morphological operators. We develop a pair of dual adjunctions between the vertex set and the hyperedge set of a hypergraph 𝐻, by defining a vertex-hyperedge correspondence. This allows us to recover the classical notion of a dilation/erosion of a subset of vertices and to extend it to subhypergraphs of 𝐻. This paper also studies the concept of morphological adjunction on hypergraphs for which both the input and the output are hypergraphs |
Description: | ISRN Discrete Mathematics Volume 2014, Article ID 436419, 6 pages |
URI: | http://dyuthi.cusat.ac.in/purl/4222 |
Files | Size |
---|---|
Mathematical Mo ... peredge Correspondence.pdf | (2.544Mb) |
Abstract: | In this paper we propose a cryptographic transformation based on matrix manipulations for image encryption. Substitution and diffusion operations, based on the matrix, facilitate fast conversion of plaintext and images into ciphertext and cipher images. The paper describes the encryption algorithm, discusses the simulation results and compares with results obtained from Advanced Encryption Standard (AES). It is shown that the proposed algorithm is capable of encrypting images eight times faster than AES. |
Description: | Recent Advances in Intelligent Computational Systems (RAICS), 2011 IEEE |
URI: | http://dyuthi.cusat.ac.in/purl/4518 |
Files | Size |
---|---|
Matrix based Cr ... cient image encryption.pdf | (1.210Mb) |
Abstract: | In symmetric block ciphers, substitution and diffusion operations are performed in multiple rounds using sub-keys generated from a key generation procedure called key schedule. The key schedule plays a very important role in deciding the security of block ciphers. In this paper we propose a complex key generation procedure, based on matrix manipulations, which could be introduced in symmetric ciphers. The proposed key generation procedure offers two advantages. First, the procedure is simple to implement and has complexity in determining the sub-keys through crypt analysis. Secondly, the procedure produces a strong avalanche effect making many bits in the output block of a cipher to undergo changes with one bit change in the secret key. As a case study, matrix based key generation procedure has been introduced in Advanced Encryption Standard (AES) by replacing the existing key schedule of AES. The key avalanche and differential key propagation produced in AES have been observed. The paper describes the matrix based key generation procedure and the enhanced key avalanche and differential key propagation produced in AES. It has been shown that, the key avalanche effect and differential key propagation characteristics of AES have improved by replacing the AES key schedule with the Matrix based key generation procedure |
Description: | International Conference on VLSI, Communication & Instrumentation (ICVCI) 2011 |
URI: | http://dyuthi.cusat.ac.in/purl/4519 |
Files | Size |
---|---|
Matrix based Ke ... ed Encryption Standard.pdf | (236.1Kb) |
Abstract: | Laser‐induced damage and ablation thresholds of bulk superconducting samples of Bi2(SrCa)xCu3Oy(x=2, 2.2, 2.6, 2.8, 3) and Bi1.6 (Pb)xSr2Ca2Cu3 Oy (x=0, 0.1, 0.2, 0.3, 0.4) for irradiation with a 1.06 μm beam from a Nd‐YAG laser have been determined as a function of x by the pulsed photothermal deflection technique. The threshold values of power density for ablation as well as damage are found to increase with increasing values of x in both systems while in the Pb‐doped system the threshold values decrease above a specific value of x, coinciding with the point at which the Tc also begins to fall. |
URI: | http://dyuthi.cusat.ac.in/purl/2577 |
Files | Size |
---|---|
Dyuthi-P0137.pdf | (947.3Kb) |
Abstract: | The dual-beam thermal lens technique has been found to be very effective for the measurement of fluorescence quantum yields of dye solutions. The concentration-dependence of the quantum yield of rhodamine B in methanol is studied here using this technique. The observed results are in line with the conclusion that the reduction in the quantum yield in the quenching region is essentially due to the non-radiative relaxation of the absorbed energy. The thermal lens has been found to become abberated above 40 mW of pump laser power. This low value for the upper limit of pump power is due to the fact that the medium is a resonantly absorbing one. |
URI: | http://dyuthi.cusat.ac.in/purl/2453 |
Files | Size |
---|---|
Dyuthi-P0314.pdf | (115.8Kb) |
URI: | http://dyuthi.cusat.ac.in/purl/2658 |
Files | Size |
---|---|
Dyuthi-P0339.pdf | (198.7Kb) |
Abstract: | A simple experimental set-up is described to measure the electromagnetic shielding property of high Tc superconducting samples. Measurements were performed using HTSC materials in the form of laser ablated thin films, powders and sintered pellets. Samples used were Gd-123 in pure and doped form as well as a few Bi-based superconducting ceramics. For comparison, similar measurements were carried out on metals like aluminium, copper and μ metal. Very effective shielding was observed for HTSC materials compared to the conventional materials mentioned above. However it also depended on the sample types and poor shielding was observed for powdered HTSC material in comparison to thin films prepared by laser ablation. |
URI: | http://dyuthi.cusat.ac.in/purl/2657 |
Files | Size |
---|---|
Dyuthi-P0338.pdf | (195.2Kb) |
Abstract: | High strength and high performance concrete are being widely used all over the world. Most of the applications of high strength concrete have been found in high rise buildings, long span bridges etc. The potential of rice husk ash as a cement replacement material is well established .Earlier researches showed an improvement in mechanical properties of high strength concrete with finely ground RHA as a partial cement replacement material. A review of literature urges the need for optimizing the replacement level of cement with RHA for improved mechanical properties at optimum water binder ratio. This paper discusses the mechanical properties of RHA- High strength concrete at optimized conditions |
Description: | American Journal of Engineering Research (AJER),Volume-3 pp-14-19 |
URI: | http://dyuthi.cusat.ac.in/purl/4643 |
Files | Size |
---|---|
Mechanical Prop ... High strength Concrete.pdf | (444.0Kb) |
Abstract: | A series of short-isora-fiber-reinforced natural rubber composites were prepared by the incorporation of fibers of different lengths (6, 10, and 14 mm) at 15 phr loading and at different concentrations (10, 20, 30, and 40 phr) with a 10 mm fiber length. Mixes were also prepared with 10 mm long fibers treated with a 5% NaOH solution. The vulcanization parameters, processability, and stress-strain properties of these composites were analyzed. Properties such as tensile strength, tear strength, and tensile modulus were found to be at maximum for composites containing longitudinally oriented fibers 10 mm in length. Mixes containing fiber loadings of 30 phr with bonding agent (resorcinol-formaldehyde [RF] resin) showed mechanical properties superior to all other composites. Scanning electron microscopy (SEM) studies were carried out to investigate the fiber surface morphology, fiber pullout, and fiber-rubber interface. SEM studies showed that the bonding between the fiber and rubber was improved with treated fibers and with the use of bonding agent. |
URI: | http://dyuthi.cusat.ac.in/purl/808 |
Files | Size |
---|---|
Lovely Mathew a ... roperties...,April2006.PDF | (8.573Mb) |
Abstract: | This paper presents the results from an experimental program and an analytical assessment of the influence of addition of fibers on mechanical properties of concrete. Models derived based on the regression analysis of 60 test data for various mechanical properties of steel fiber-reinforced concrete have been presented. The various strength properties studied are cube and cylinder compressive strength, split tensile strength, modulus of rupture and postcracking performance, modulus of elasticity, Poisson’s ratio, and strain corresponding to peak compressive stress. The variables considered are grade of concrete, namely, normal strength 35 MPa , moderately high strength 65 MPa , and high-strength concrete 85 MPa , and the volume fraction of the fiber Vf =0.0, 0.5, 1.0, and 1.5% . The strength of steel fiber-reinforced concrete predicted using the proposed models have been compared with the test data from the present study and with various other test data reported in the literature. The proposed model predicted the test data quite accurately. The study indicates that the fiber matrix interaction contributes significantly to enhancement of mechanical properties caused by the introduction of fibers, which is at variance with both existing models and formulations based on the law of mixtures |
Description: | Journal of Materials in Civil Engineering, Vol. 19, No. 5, May 1, 2007. |
URI: | http://dyuthi.cusat.ac.in/purl/4537 |
Files | Size |
---|---|
Mechanical Prop ... er-Reinforced Concrete.pdf | (143.9Kb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.