Abstract: | This paper presents the design and development of a compact CPW fed quad band antenna. This low profile antenna has a dimension of 32mmx31mm when printed on a substrate of dielectric constant 4.4 and height 1.6mm. The antenna covers GSM 900, DCS 1800, IEEE802.11.a, IEEE802.11.b and HiperLAN2 bands. The antenna exhibits good radiation characteristics with moderate gain |
Description: | Applied Electromagnetics Conference (AEMC), 2009 |
URI: | http://dyuthi.cusat.ac.in/purl/4344 |
Files | Size |
---|---|
CPW-Fed Quad-Ba ... t Wireless Application.pdf | (2.805Mb) |
Abstract: | A new geometry (semiannular) for Josephson junction has been proposed and theoretical studies have shown that the new geometry is useful for electronic applications [1, 2]. In this work we study the voltage‐current response of the junction with a periodic modulation. The fluxon experiences an oscillating potential in the presence of the ac‐bias which increases the depinning current value. We show that in a system with periodic boundary conditions, average progressive motion of fluxon commences after the amplitude of the ac drive exceeds a certain threshold value. The analytic studies are justified by simulating the equation using finite‐difference method. We observe creation and annihilation of fluxons in semiannular Josephson junction with an ac‐bias in the presence of an external magnetic field. |
URI: | http://dyuthi.cusat.ac.in/purl/2908 |
Files | Size |
---|---|
Dyuthi-P00407.pdf | (881.0Kb) |
Abstract: | Cryptosystem using linear codes was developed in 1978 by Mc-Eliece. Later in 1985 Niederreiter and others developed a modified version of cryptosystem using concepts of linear codes. But these systems were not used frequently because of its larger key size. In this study we were designing a cryptosystem using the concepts of algebraic geometric codes with smaller key size. Error detection and correction can be done efficiently by simple decoding methods using the cryptosystem developed. Approach: Algebraic geometric codes are codes, generated using curves. The cryptosystem use basic concepts of elliptic curves cryptography and generator matrix. Decrypted information takes the form of a repetition code. Due to this complexity of decoding procedure is reduced. Error detection and correction can be carried out efficiently by solving a simple system of linear equations, there by imposing the concepts of security along with error detection and correction. Results: Implementation of the algorithm is done on MATLAB and comparative analysis is also done on various parameters of the system. Attacks are common to all cryptosystems. But by securely choosing curve, field and representation of elements in field, we can overcome the attacks and a stable system can be generated. Conclusion: The algorithm defined here protects the information from an intruder and also from the error in communication channel by efficient error correction methods. |
URI: | http://dyuthi.cusat.ac.in/xmlui/purl/2007 |
Files | Size |
---|---|
A Cryptosystem using....pdf | (93.25Kb) |
Abstract: | A new electronically reconfigurable dual frequency microstrip patch antenna with highly simplified varactor tuning circuitry is presented. The proposed design allows relatively independent selection of the two operating frequencies. Tuning ranges of 7.1 and 4.1% are realised for the two resonant frequencies without the use of any matching circuits. |
URI: | http://dyuthi.cusat.ac.in/purl/2758 |
Files | Size |
---|---|
Dyuthi-P00377.pdf | (94.62Kb) |
Abstract: | Thin film solar cells having structure CuInS2/In2S3 were fabricated using chemical spray pyrolysis (CSP) technique over ITO coated glass. Top electrode was silver film (area 0.05 cm2). Cu/In ratio and S/Cu in the precursor solution for CuInS2 were fixed as 1.2 and 5 respectively. In/S ratio in the precursor solution for In2S3 was fixed as 1.2/8. An efficiency of 0.6% (fill factor -37.6%) was obtained. Cu diffusion to the In2S3 layer, which deteriorates junction properties, is inevitable in CuInS2/In2S3 cell. So to decrease this effect and to ensure a Cu-free In2S3 layer at the top of the cell, Cu/In ratio was reduced to 1. Then a remarkable increase in short circuit current density was occurred from 3 mA/cm2 to 14.8 mA/cm2 and an efficiency of 2.13% was achieved. Also when In/S ratio was altered to 1.2/12, the short circuit current density increased to 17.8 mA/cm2 with an improved fill factor of 32% and efficiency remaining as 2%. Thus Cu/In and In/S ratios in the precursor solutions play a crucial role in determining the cell parameters |
Description: | Energy Procedia 15 ( 2012 ) 283 – 290 |
URI: | http://dyuthi.cusat.ac.in/purl/4722 |
Files | Size |
---|---|
CuInS2In2S3 Cel ... ios on Cell Parameters.pdf | (1.060Mb) |
Abstract: | Blends of styrene butadiene rubber (SBR) with maleic anhydride grafted whole tire reclaim (MA-g-WTR) have been prepared and the cure and mechanical properties have been studied with respect to the reclaim content. The grafting was carried out in the presence of dicumylperoxide (DCP) in a Brabender Plasticorder at 150'C. The presence of anhydride group on the WTR was confirmed by infrared spectrometry (IR) study. The properties were compared with those of the blends containing unmodified WTR. Though the cure time was marginally higher, the mechanical properties of the blends containing grafted WTR were better than that of the unmodified blends. |
URI: | http://dyuthi.cusat.ac.in/purl/886 |
Files | Size |
---|---|
NELSON P A, S. ... aracteristics and......PDF | (5.257Mb) |
Abstract: | Ultra fine nickel ferrite have been synthesized by the sol-gel method. By heat treating different portions of the prepared powder separately at different temperatures, nano-sized particles of nickel ferrite with varying particle sizes were obtained. These powders were characterised by the X-ray diffraction and then incorporated in the nitrile rubber matrix according to a specific recipe for various loadings. The cure characteristics and the mechanical properties of these rubber ferrite composites (RFCs) were evaluated. The effect of loading and the grain size of the filler on the cure characteristics and tensile properties were also evaluated. It is found that the grain size and porosity of the filler plays a vital role in determining the mechanical properties of the RFCs |
Description: | Journal ofAppliedPolymer Science,Vol. 119, 3019–3025 (2011) |
URI: | http://dyuthi.cusat.ac.in/purl/4424 |
Files | Size |
---|---|
Cure Characteri ... n Nano-Nickel Ferrites.pdf | (692.2Kb) |
Abstract: | Cure characteristics and mechanical properties of short nylon fiber reinforced acrylonitrile butadiene rubber-reclaimed rubber composites were studied. Minimum torque, (maximum-minimum) torque and cure rate increased with fiber concentration. Scorch time and cure time decreased by the addition of fibers. Properties like tensile strength, tear strength, elongation at break, abrasion loss and heat build up were studied in both orientations of fibers. Tensile and tear properties were enhanced by the addition of fibers and were higher in the longitudinal direction. Heat build up increased with fiber concentration and were higher in the longitudinal direction. Abrasion resistance was improved in presence of short fibers and was higher in the longitudinal direction. Resilience increased on the introduction of fibers. Compression set was higher for blends. |
URI: | http://dyuthi.cusat.ac.in/purl/897 |
Files | Size |
---|---|
sreeja T D, S. ... teristics and .........PDF | (4.832Mb) |
Abstract: | Cure characteristics of short polyester fiber-polyurethane composites with respect to different bonding agents (MD resins) based on 4, 4' diphenylmethanediisocyanate (MDI) and various diols like propyleneglycol (PG), polypropyleneglycol (PPG) and glycerol (GL) were studied. Tmax. - Tmin. of composites having MD resin were found to be higher than the composite without MD resin. Minimum torque and Tmax. - Tmin., scorch time and optimum cure time were increased with the increase of MDI equivalence. Optimum ratio of MDI / -of in the resin was found to be within the range of 1-1.5. It was observed from the cure characteristics that for getting better adhesion between short polyester fiber and the polyurethane matrix the best choice of MD resin was one based on MDI and 1:1 equivalent mixture of polypropyleneglycol and glycerol. |
URI: | http://dyuthi.cusat.ac.in/purl/902 |
Files | Size |
---|---|
Suhara, F S K N ... polyester..............PDF | (7.438Mb) |
Abstract: | Rubber ferrite composites were prepared by incorporating nickel ferrite in a neoprene rubber matrix. Kinetics of the cure reaction were determined from the rheometric torque values and found to follow first-order kinetics. Analysis of the swelling behavior of the rubber ferrite composites in toluene elucidates the mechanism of solvent penetration and sorption characteristics, and reveals the extent of the physical interaction of the ferrite particles with the neoprene rubber matrix. Mechanical properties of rubber ferrite composites were determined, which support the reinforcing nature of nickel ferrite to the neoprene rubber matrix. These results show that magnetic composites with the required processing safety can be prepared economically by incorporating higher amounts of nickel ferrite in the neoprene rubber matrix |
Description: | International Journal of Polymeric Materials, 59:173–183, 2010 |
URI: | http://dyuthi.cusat.ac.in/purl/4425 |
Files | Size |
---|---|
Cure Kinetics a ... ber Ferrite Composites.pdf | (327.4Kb) |
Abstract: | The South West (S.W.) coast of India is blessed with a series of wetland systems popularly referred to as backwaters covering a total area of 46128.94 ha. These backwaters are internationally renowned for their aesthetic and scientific values including being a repository for several species fish and shell fishes. This is more significant in that three wetlands (Vembanad, Sasthamcotta and Ashtamudi) have recently been designated as Ramsar sites of international importance. Thirty major backwaters forming the crux of the coastal wetlands form an abode for over 200 resident or migratory fish and shellfish species. The fishing activities in these water bodies provide the livelihood to about 200,000 fishers and also provide full-time employment to over 50,000 fishermen. This paper describes the changes on the environmental and biodiversity status of selected wetlands, during 1994-2005 period. The pH was generally near neutral to alkaline in range. The salinity values indicated mixohaline condition ranging from 5.20-32.38 ppt. in the 12 wetlands. The productivity values were generally low in most of the wetlands during the study, where the gross production varied from 0.22 gC/m3/day in Kadinamkulam to 1.10 gC/m3/day in the Kayamkulam. The diversity of plankton and benthos was more during the pre-monsoon compared to the monsoon and post-monsoon periods in most of the wetlands. The diversity of plankton and benthos was more during the pre-monsoon compared to the monsoon and post-monsoon periods in most of the wetlands. The average fish yield per ha. varied from 246 kg. in Valapattanam to 2747.3 kg. in Azhikode wetland. Retting of coconut husk in most of the wetlands led to acidic pH conditions with anoxia resulting in the production of high amounts of sulphide, coupled with high carbon dioxide values leading to drastic reduction in the incidence and abundance of plankton, benthic fauna and the fishery resources. The major fish species recorded from the investigation were Etroplus suratensis, E. maculatus, Channa marulius, Labeo dussumieri, Puntius sp. Lutianus argentimaculatus, Mystus sp., Tachysurus sp. and Hemiramphus sp. The majority of these backwaters are highly stressed, especially during the pre monsoon period when the retting activity is at its peak. The study has clearly reflected that a more restrained and cautious approach is needed to manage and preserve the unique backwater ecosystems of South-west India |
Description: | Proceedings of the Conserv-Vision Conference, University of Waikato, 2-4 July 2007 |
URI: | http://dyuthi.cusat.ac.in/purl/4454 |
Files | Size |
---|---|
Current status ... sustainable management.pdf | (915.0Kb) |
Description: | Current Trends in Wireless Networking. DigitalLibrary@CUSAT. ... |
URI: | http://dyuthi.cusat.ac.in/purl/4181 |
Files | Size |
---|---|
Current Trends in WirelessNetworking.pdf | (7.463Mb) |
Abstract: | Photothermal deflection technique was used for determining the laser damage threshold of polymer samples of teflon (PTFE) and nylon. The experiment was conducted using a Q-switched Nd-YAG laser operating at its fundamental wavelength (1-06μm, pulse width 10 nS FWHM) as irradiation source and a He-Ne laser as the probe beam, along with a position sensitive detector. The damage threshold values determined by photothermal deflection method were in good agreement with those determined by other methods. |
URI: | http://dyuthi.cusat.ac.in/purl/2629 |
Files | Size |
---|---|
Dyuthi-P0188.pdf | (288.5Kb) |
Abstract: | While conducting surveys for potential ornamental fishes in the fresh water bodies of the river Periyar, three specimens of Danio fraseri Hora and Mukerji, were collected from a stream joining to the river Periyar, at Desom, near Alwaye on 6 October 2001. It is the only species so far known under the genus Danio with a hypertrophied lower lip forming a loose flap along the lower jaw. This is a new locality record for Kerala and southern Western Ghats. |
Description: | Zoos print journal 18(6):1111-1112 |
URI: | http://dyuthi.cusat.ac.in/purl/4133 |
Files | Size |
---|---|
Danio Fraseri H ... Southern Western Ghats.pdf | (186.0Kb) |
Abstract: | Four distinct peaks are observed at 140, -26, -132 and -140°C in the sigma x* against T-1 plot between 200 and - 196°C for (NH4)3H(SO4)2, corresponding to four different phase transitions of which the one at -26°C is reported here for the first time. Data on doped samples reveal the charge transport mechanism in the crystal. |
URI: | http://dyuthi.cusat.ac.in/purl/2424 |
Files | Size |
---|---|
Dyuthi-P0278.pdf | (326.3Kb) |
Abstract: | Decimal multiplication is an integral part offinancial, commercial, and internet-based computations. The basic building block of a decimal multiplier is a single digit multiplier. It accepts two Binary Coded Decimal (BCD) inputs and gives a product in the range [0, 81] represented by two BCD digits. A novel design for single digit decimal multiplication that reduces the critical path delay and area is proposed in this research. Out of the possible 256 combinations for the 8-bit input, only hundred combinations are valid BCD inputs. In the hundred valid combinations only four combinations require 4 x 4 multiplication, combinations need x multiplication, and the remaining combinations use either x or x 3 multiplication. The proposed design makes use of this property. This design leads to more regular VLSI implementation, and does not require special registers for storing easy multiples. This is a fully parallel multiplier utilizing only combinational logic, and is extended to a Hex/Decimal multiplier that gives either a decimal output or a binary output. The accumulation ofpartial products generated using single digit multipliers is done by an array of multi-operand BCD adders for an (n-digit x n-digit) multiplication. |
Description: | Electronic Design, 2008. ICED 2008. International Conference on |
URI: | http://dyuthi.cusat.ac.in/purl/3860 |
Files | Size |
---|---|
Decimal Multipl ... compact BCD Multiplier.pdf | (1.493Mb) |
Abstract: | The demand for new telecommunication services requiring higher capacities, data rates and different operating modes have motivated the development of new generation multi-standard wireless transceivers. A multi-standard design often involves extensive system level analysis and architectural partitioning, typically requiring extensive calculations. In this research, a decimation filter design tool for wireless communication standards consisting of GSM, WCDMA, WLANa, WLANb, WLANg and WiMAX is developed in MATLAB® using GUIDE environment for visual analysis. The user can select a required wireless communication standard, and obtain the corresponding multistage decimation filter implementation using this toolbox. The toolbox helps the user or design engineer to perform a quick design and analysis of decimation filter for multiple standards without doing extensive calculation of the underlying methods. |
Description: | World Academy of Science, Engineering and Technology Vol:3 2009-11-22 |
URI: | http://dyuthi.cusat.ac.in/purl/3890 |
Files | Size |
---|---|
Decimation Filt ... nsceivers using MATLAB.pdf | (488.1Kb) |
Abstract: | In the present study dopamine was measured in the hypothalamus, brainstem, pancreatic islets and plasma, using HPLC. Dopamine D2 receptor changes in the hypothalamus, brainstem and pancreatic islets were studied using [3H] YM-09151-2 in streptozotocin-induced diabetic and insulintreated diabetic rats. There was a significant decrease in dopatnine content in the hypothalamus (P<0.001), brainstem (P<0.001), pancreatic islets (P<0.001) and plasma (P<0.00I) in diabetic rats when compared to control. Scatchard analysis of [3H] YM-09151-2 in the hypothalamus of diabetic rats showed a significant decrease in Bax (P<0.001) and Kd, showing an increased affinity of D2 receptors when compared to control. Insulin treatment did not completely reverse the changes that occurred during diabetes. There was a significant decrease in B,nax (P<0.01) with decreased affinity in the brainstem of diabetic rats. The islet membrane preparation of diabetic rats showed a significant decrease (P<0.001) in the binding of [3H] YM-09 151-2 with decreased Kd (P<0.001) compared to control. The increase in affinity of D2 receptors in hypothalamus and pancreatic islets and the decreased affinity in brainstem were confirmed by competition analysis. Thus our results suggest that the decreased dopamine D, receptor function in the hypothalamus, brainstem and pancreas affects insulin secretion in diabetic rats, which has immense clinical relevance to the management of diabetes. |
URI: | http://dyuthi.cusat.ac.in/purl/589 |
Files | Size |
---|---|
P N Eswar shankar and others(2006)15nov..PDF | (6.618Mb) |
Abstract: | The present study was to investigate the rote of central 5-11T and 5-HT,:v receptor Lindin4o and acne expression in it 'at mo(lel of pancreatic regeneration using 60" -, pancreatcutumy. The pancreatic regeneration was evaluated by 5-HT content and 5-HT,,receptor gene expression in the cerebral cortex (CC) and brain stem MS) of Alain opcrate,t, 7 It utd 7 (.lays panereatectomised rats. 5-11T content significantly increased in the CC' (I' 1.1)11 and 13S (P 0.05) of 72 Ii p.ntcreateetomiscd rats. Sympathetic activity was decreased as indicated by the significantly decreased norcpiuephrine (NIi) and epinephrine (FTI) Icvcl (1' < 0.001 and P < 0.05) in the plasma of 72 h panereateetomised rats. 5-111 ,^, receptor density and affinity was decreased in the CC (P < 0.01) and BS (P < 0.01). These rh:)nge; correlated with a diminished 5-IITIA receptor mRNA expression in the brain region. studied. Our resuils suggest that the brain 5-11T through 5-HTin receptor has it funcuon:0 rule iii 11w pi+ncreatic regcner:ttion through the sympathetic regulation. |
URI: | http://dyuthi.cusat.ac.in/purl/528 |
Files | Size |
---|---|
Valiyaveetil Mohanan and others(2004)aug30.PDF | (6.620Mb) |
Abstract: | The purpose of this study was to investigate the role of central 5-HT2C receptor binding in rat model of pancreatic regeneration using 60-70% pancreatectomy. The 5-HT and 5-HT2c receptor kinetics were studied in cerebral cortex and brain stem of sham operated, 72 h pancreatectomised and 7 days pancreatectomised rats. Scatchard analysis with [3H] mesulergine in cerebral cortex showed a significant decrease (p < 0.05) in maximal binding (B^,ax) without any change in Kd in 72 h pancreatectomised rats compared with sham. The decreased Bmax reversed to sham level by 7 days after pancreatectomy. In brain stem , Scatchard analysis showed a significant decrease (p < 0.01) in Bax with a significant increase (p < 0.01) in Kd. Competition analysis in brain stem showed a shift in affinity towards a low affinity. These parameters were reversed to sham level by 7 days after pancreatectomy. Thus the results suggest that 5-HT through the 5-HT2C receptor in the brain has a functional regulatory role in the pancreatic regeneration. (Mol Cell Biochem 272: 165-170, 2005) |
URI: | http://dyuthi.cusat.ac.in/purl/527 |
Files | Size |
---|---|
Valiyaveetil Mohanan and others(2004)dec30.PDF | (4.745Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.