| URI: | http://dyuthi.cusat.ac.in/purl/5550 |
| Files | Size |
|---|---|
| Dyuthi T-2592.pdf | (6.380Mb) |
| Abstract: | Salient pole brushless alternators coupled to IC engines are extensively used as stand-by power supply units for meeting in- dustrial power demands. Design of such generators demands high power to weight ratio, high e ciency and low cost per KVA out- put. Moreover, the performance characteristics of such machines like voltage regulation and short circuit ratio (SCR) are critical when these machines are put into parallel operation and alterna- tors for critical applications like defence and aerospace demand very low harmonic content in the output voltage. While designing such alternators, accurate prediction of machine characteristics, including total harmonic distortion (THD) is essential to mini- mize development cost and time. Total harmonic distortion in the output voltage of alternators should be as low as possible especially when powering very sophis- ticated and critical applications. The output voltage waveform of a practical AC generator is replica of the space distribution of the ux density in the air gap and several factors such as shape of the rotor pole face, core saturation, slotting and style of coil disposition make the realization of a sinusoidal air gap ux wave impossible. These ux harmonics introduce undesirable e ects on the alternator performance like high neutral current due to triplen harmonics, voltage distortion, noise, vibration, excessive heating and also extra losses resulting in poor e ciency, which in turn necessitate de-rating of the machine especially when connected to non-linear loads. As an important control unit of brushless alternator, the excitation system and its dynamic performance has a direct impact on alternator's stability and reliability. The thesis explores design and implementation of an excitation i system utilizing third harmonic ux in the air gap of brushless al- ternators, using an additional auxiliary winding, wound for 1=3rd pole pitch, embedded into the stator slots and electrically iso- lated from the main winding. In the third harmonic excitation system, the combined e ect of two auxiliary windings, one with 2=3rd pitch and another third harmonic winding with 1=3rd pitch, are used to ensure good voltage regulation without an electronic automatic voltage regulator (AVR) and also reduces the total harmonic content in the output voltage, cost e ectively. The design of the third harmonic winding by analytic methods demands accurate calculation of third harmonic ux density in the air gap of the machine. However, precise estimation of the amplitude of third harmonic ux in the air gap of a machine by conventional design procedures is di cult due to complex geome- try of the machine and non-linear characteristics of the magnetic materials. As such, prediction of the eld parameters by conven- tional design methods is unreliable and hence virtual prototyping of the machine is done to enable accurate design of the third har- monic excitation system. In the design and development cycle of electrical machines, it is recognized that the use of analytical and experimental methods followed by expensive and in exible prototyping is time consum- ing and no longer cost e ective. Due to advancements in com- putational capabilities over recent years, nite element method (FEM) based virtual prototyping has become an attractive al- ternative to well established semi-analytical and empirical design methods as well as to the still popular trial and error approach followed by the costly and time consuming prototyping. Hence, by virtually prototyping the alternator using FEM, the important performance characteristics of the machine are predicted. Design of third harmonic excitation system is done with the help of results obtained from virtual prototype of the machine. Third harmonic excitation (THE) system is implemented in a 45 KVA ii experimental machine and experiments are conducted to validate the simulation results. Simulation and experimental results show that by utilizing third harmonic ux in the air gap of the ma- chine for excitation purposes during loaded conditions, triplen harmonic content in the output phase voltage is signi cantly re- duced. The prototype machine with third harmonic excitation system designed and developed based on FEM analysis proved to be economical due to its simplicity and has the added advan- tage of reduced harmonics in the output phase voltage. |
| Description: | School of Engineering |
| URI: | http://dyuthi.cusat.ac.in/purl/5024 |
| Files | Size |
|---|---|
| Dyuthi-2090.pdf | (7.056Mb) |
| Abstract: | This work envisages the fermentation of prawn shell waste into a more nutritious product with simpler components for application as a feed ingredient in aquaculture. This product would be a rich source of protein along with chitin, minerals, vitamins and N-acetyl glucosamine. A brief description of the various processing (chemical and bioprocess) methods employed for chitin, chitosan and single sell protein preparations from shell waste. It deals with the isolation of micro flora associated with prawn shell degradation. It describes the methods adopted for fermentation of prawn shell degradation and fermentation of prawn shell waste with the selected highly chitinoclastic strains. The comparison of SSF and SmF for each selected strain in terms of enrichment of protein, lipid and carbohydrate in the fermented product was done. Detailed analysis of product quality is discussed. The feed for mulation and feeding experiment explained in detail. Statistical analysis of various biogrowth parameters was done with Duncan’s multiple range test. Very briefly explains 28 days of feeding experiment. A method for the complete utilization of shell waste explains with the help of experiments. |
| URI: | http://dyuthi.cusat.ac.in/purl/82 |
| Files | Size |
|---|---|
| Dyuthi-T0104.pdf | (5.690Mb) |
| Abstract: | Recently’ recognition cnf immobilization ‘technology for the rapid conversion of several substrates into metabolites and repeated reuse of the biocatalysts have drawn the attention of the fermentation scientists and technologists to try these new technologies for the rapid production of pnxkmt and enhancement of the efficiencies of the systems Hence in the present study rice was selected,as a substrate since it is a rich source of starch, available and cultivated throughout the year almost in all part of our country. Rice although known for its use as a staple food in many forms as rice, idli, dosai etc., has not been used in industry extensively. However, it ii; a potential resource for’ the production of alcohol, high protein food anui for sugar and sugar syrups as it is evidenced by the few reports mentioned in the review of literature. Of the several microorganisms available, Bacillus sp, is a known candidate for the production of amylases. Hence in the present study Bacillus sp, was desired for its known efficiencies in starch conversion |
| Description: | Department of Applied Chemistry, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3658 |
| Files | Size |
|---|---|
| Dyuthi-T1578.pdf | (3.142Mb) |
| Abstract: | Many finite elements used in structural analysis possess deficiencies like shear locking, incompressibility locking, poor stress predictions within the element domain, violent stress oscillation, poor convergence etc. An approach that can probably overcome many of these problems would be to consider elements in which the assumed displacement functions satisfy the equations of stress field equilibrium. In this method, the finite element will not only have nodal equilibrium of forces, but also have inner stress field equilibrium. The displacement interpolation functions inside each individual element are truncated polynomial solutions of differential equations. Such elements are likely to give better solutions than the existing elements.In this thesis, a new family of finite elements in which the assumed displacement function satisfies the differential equations of stress field equilibrium is proposed. A general procedure for constructing the displacement functions and use of these functions in the generation of elemental stiffness matrices has been developed. The approach to develop field equilibrium elements is quite general and various elements to analyse different types of structures can be formulated from corresponding stress field equilibrium equations. Using this procedure, a nine node quadrilateral element SFCNQ for plane stress analysis, a sixteen node solid element SFCSS for three dimensional stress analysis and a four node quadrilateral element SFCFP for plate bending problems have been formulated.For implementing these elements, computer programs based on modular concepts have been developed. Numerical investigations on the performance of these elements have been carried out through standard test problems for validation purpose. Comparisons involving theoretical closed form solutions as well as results obtained with existing finite elements have also been made. It is found that the new elements perform well in all the situations considered. Solutions in all the cases converge correctly to the exact values. In many cases, convergence is faster when compared with other existing finite elements. The behaviour of field consistent elements would definitely generate a great deal of interest amongst the users of the finite elements. |
| Description: | Department of Ship Technology, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2121 |
| Files | Size |
|---|---|
| Dyuthi-T0411.pdf | (1.799Mb) |
| Abstract: | Important issues related to femtosecond (fs) pulses and its relevance to this thesis are discussed. A fundamental characteristic, like the timebandwidth product for fs pulses is decribed in detail. A brief review of generation of ultrashort pulses and its propagation through an optically transparent media are presented. Interaction of strong pulses with matter and different ionization processes are also described. An overview of the thesis is presented at the end |
| URI: | http://dyuthi.cusat.ac.in/purl/5097 |
| Files | Size |
|---|---|
| Dyuthi- T 2163.pdf | (11.76Mb) |
| Description: | Dept.of Applied Economics,Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2783 |
| Files | Size |
|---|---|
| Dyuthi-T0806.pdf | (2.129Mb) |
| Abstract: | Financial inclusion for inclusive growth is central to the developmental philosophy of most of the nations over the past decade. It has been a priority for policy makers and regulators in financial sector development for improving access and usage of financial services to achieve comprehensive financial inclusion. The initiatives taken towards financial inclusion can promote a more effective and efficient process to achieve significant improvements in financial inclusion are to establish and achieve shared and sustainable development and growth. Realising this, an increasing number of countries are committing to promote financial inclusion, encouraged by the growing body of country level experiences (World Bank, 2012). Financial inclusion basically means, broad based growth through participation as well as sharing the benefits from the growth process along with the under privileged and marginal segments of the economy. Evidence suggests that it has substantial benefits for equitable and sustainable growth. Inclusive growth ensures that while economy grows rapidly, all segments of society are involved in this growth process, ensuring equal opportunities, devoid of any regional or sectoral disparitiesIt is widely acknowledged that the objective ofinclusive growth is accomplished through the process of financial inclusion. Financial inclusion envisages bringing everyone, irrespective of financial status, into the banking fold for the individual progress and development and thereby achieving comprehensive growth with equity |
| URI: | http://dyuthi.cusat.ac.in/purl/5085 |
| Files | Size |
|---|---|
| Dyuthi- 2151.pdf.pdf | (2.971Mb) |
| Abstract: | Today India is seeking a speedy transformation of her semi-stagnant economy to a dynamic one by means of economic planning in a democratic set up. In the context of this growth oriented endeavour public sector has a vital role to play. After three decades of planned development, it has become important that India must make fresh appraisals on the role of public sector in the economic renaissance of the country. Almost no comprehensive study has been made on this vital segment of the economy vis-a-vis the growth economics. This study is an attempt to fill this need in a very modest way. It presents the subject in a new perspective. An earnest attempt is made to reveal the critical problems inhibiting the growth of the public sector from a new angle which focusses the spot-light on the economics of development. |
| Description: | School of management studies, Cochin University of Science And Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3311 |
| Files | Size |
|---|---|
| Dyuthi-T1285.pdf | (33.10Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/1247 |
| Files | Size |
|---|---|
| Wilson P R 1982.PDF | (552.0Kb) |
| URI: | http://dyuthi.cusat.ac.in/purl/5221 |
| Files | Size |
|---|---|
| Dyuthi T-2256.pdf | (5.469Mb) |
| Abstract: | Mangrove forests are the most productive and bio-diverse wetlands on earth. It generate a large amount of litter in the form of leaves, branches, twigs, inflorescence and other debris and provides habitat for diverse flora and fauna of marine and terrestrial origin such as bacteria, fungi, algae, lichens, zooplankton, benthos, birds, reptiles and mammals. These systems act as nursery for many fishes and shellfishes. The other sources may also provide important organic carbon inputs; including allochthonous riverine or marine material, autochthonous production by benthic or epiphytic micro- or macroalgae, and local water column production by phytoplankton. Since mangrove sediments are very complex which receives autochthonous and allochthonous organic matter inputs, the information extracted from the analysis of mangrove sediments is the fingerprint of both natural and human-induced changes. |
| URI: | http://dyuthi.cusat.ac.in/purl/5077 |
| Files | Size |
|---|---|
| Dyuthi- T 2140.pdf | (33.15Mb) |
| Abstract: | Warships are generally sleek, slender with V shaped sections and block coefficient below 0.5, compared to fuller forms and higher values for commercial ships. They normally operate in the higher Froude number regime, and the hydrodynamic design is primarily aimed at achieving higher speeds with the minimum power. Therefore the structural design and analysis methods are different from those for commercial ships. Certain design guidelines have been given in documents like Naval Engineering Standards and one of the new developments in this regard is the introduction of classification society rules for the design of warships.The marine environment imposes subjective and objective uncertainties on ship structure. The uncertainties in loads, material properties etc.,. make reliable predictions of ship structural response a difficult task. Strength, stiffness and durability criteria for warship structures can be established by investigations on elastic analysis, ultimate strength analysis and reliability analysis. For analysis of complicated warship structures, special means and valid approximations are required.Preliminary structural design of a frigate size ship has been carried out . A finite element model of the hold model, representative of the complexities in the geometric configuration has been created using the finite element software NISA. Two other models representing the geometry to a limited extent also have been created —- one with two transverse frames and the attached plating alongwith the longitudinal members and the other representing the plating and longitudinal stiffeners between two transverse frames. Linear static analysis of the three models have been carried out and each one with three different boundary conditions. The structural responses have been checked for deflections and stresses against the permissible values. The structure has been found adequate in all the cases. The stresses and deflections predicted by the frame model are comparable with those of the hold model. But no such comparison has been realized for the interstiffener plating model with the other two models.Progressive collapse analyses of the models have been conducted for the three boundary conditions, considering geometric nonlinearity and then combined geometric and material nonlinearity for the hold and the frame models. von Mises — lllyushin yield criteria with elastic-perfectly plastic stress-strain curve has been chosen. ln each case, P-Delta curves have been generated and the ultimate load causing failure (ultimate load factor) has been identified as a multiple of the design load specified by NES.Reliability analysis of the hull module under combined geometric and material nonlinearities have been conducted. The Young's Modulus and the shell thickness have been chosen as the variables. Randomly generated values have been used in the analysis. First Order Second Moment has been used to predict the reliability index and thereafter, the probability of failure. The values have been compared against standard values published in literature. |
| Description: | Department of Ship Technology, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2877 |
| Files | Size |
|---|---|
| Dyuthi-T0874.pdf | (12.19Mb) |
| Abstract: | A general introduction to the problems faced in the shrimp culture due to waste formation and its consequent environmental hazards and production problems of Giant tiger shrimp, Penaeus monodon is highlighted by the author in this thesis. The objective of the present work was to assess the potential of brackish water finfish to improve bottom soil conditions and thereby increase the growth and production of Penaeus monodon. The salient findings of the present study are summarized in chapter 7. This is followed by the references cited in the thesis and list ofpublications originated from the present study. |
| Description: | School of Industrial Fisheries, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3379 |
| Files | Size |
|---|---|
| Dyuthi-T1356.pdf | (4.121Mb) |
| Abstract: | Elasmobranchs comprising sharks, skates and rays have traditionally formed an important fishery along the Indian coast. Since 2000, Indian shark fishermen are shifting their fishing operations to deeper/oceanic waters by conducting multi-day fishing trips, which has resulted in considerable changes in the species composition of the landings vis- a-vis those reported during the 1980’s and 1990’s. A case study at Cochin Fisheries Harbour (CFH), southwest coast of India during 2008-09 indicated that besides the existing gillnet–cum- hooks & line and longline fishery for sharks, a targeted fishery at depths >300-1000 m for gulper sharks (Centrophorus spp.) has emerged. In 2008, the chondrichthyan landings (excluding batoids) were mainly constituted by offshore and deep-sea species such as Alopias superciliosus (24.2%), Carcharhinus limbatus (21.1%), Echinorhinus brucus (8.2%), Galeocerdo cuvier (5.4%), Centrophorus spp. (7.3%) and Neoharriotta pinnata (4.2%) while the contribution by the coastal species such as Sphyrna lewini (14.8%), Carcharhinus sorrah (1.4%) and other Carcharhinus spp. has reduced. Several deep-sea sharks previously not recorded in the landings at Cochin were also observed during 2008-09. It includes Hexanchus griseus, Deania profundorum, Zameus squamulosus and Pygmy false catshark (undescribed) which have been reported for the first time from Indian waters. Life history characteristics of the major fished species are discussed in relation to the fishery and its possible impacts on the resource |
| URI: | http://dyuthi.cusat.ac.in/purl/4951 |
| Files | Size |
|---|---|
| Dyuthi-T2027.pdf | (8.112Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/4957 |
| Files | Size |
|---|---|
| Dyuthi-T2033.pdf | (13.25Mb) |
| Abstract: | This thesis entitled Fish habitats and species assemblage in the selected rivers of kerala and investigation on life history traits of puntius carnaticus (JERDON,1849). Ecology is a new and exceedingly complex field of study, even though its concept was recognized by the Apostles in their use of the phrase ‘all flesh is grass.central role to play both in order to understand better the biodiversity phenomenon and to be able to draw up clear guidelines for careful resource management. In a review by WWF, IUCN and UNEP on the ways of conserving genetic diversity of freshwater fish it was recommended that the best way to conserve species diversity is to conserve habitat.The habitat studies in freshwater ecosystems are very essential for the proper understanding and management of human impact on fish diversity, to study the relationship between habitat variables and fish species assemblage structure, quantification of ecosystem degradation, habitat quality and biotic integrity of the ecosystems, development of habitat suitability index (I-ISI) models and classification of river reaches based on their physico-chemical properties. Therefore in the present study an attempt was made to assess the biodiversity potential and the relationship between habitat variables and fish species assemblage structure in six major river systems of Kerala which would be very useful in impressing upon the seriousness of habitat degradIn the present study, in Kabbini river system 15 locations encompassing between 721 946m above MSL were surveyed.ation and biotic devastation undergone in the major river systems of Kerala.During the present study the Habitat Quality Score (HQ) developed by the Ohio EPA was applied for the first time in India.The result of the present study revealed that, among various variables analysed, altitude has a very significant influence in deciding the fish diversity in six major river systems of Kerala. The fish diversity studied on the basis of Shanon-Weiner and Simpson diversity indices revealed that even though some minor variations occur with the suitability and complexity of habitats, the altitude showed inverse relationship with fish diversity.The present study revealed that the National Policy on the interlinking of rivers would permanently alter the HSI indices of the above mentioned fish species, which are now solely protected by the individuality of the rivers where their limited occurrence was notice. |
| Description: | School of Industrial Fisheries,Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3077 |
| Files | Size |
|---|---|
| Dyuthi-T1051.pdf | (11.09Mb) |
| Abstract: | importance of fishing and other allied industries in the economy was realised only very recently. Consequently only very few studies are available on the subject. Here an attempt is made to survey the available literature on the subject. |
| Description: | Department Of Applied Economics Cochin University Of Science And Technoogy |
| URI: | http://dyuthi.cusat.ac.in/purl/3843 |
| Files | Size |
|---|---|
| Dyuthi-T1774.pdf | (5.616Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/1333 |
| Files | Size |
|---|---|
| Rajasenan D 1987.PDF | (690.7Kb) |
| Abstract: | In this thesis the author has presented qualitative studies of certain Kdv equations with variable coefficients. The well-known KdV equation is a model for waves propagating on the surface of shallow water of constant depth. This model is considered as fitting into waves reaching the shore. Renewed attempts have led to the derivation of KdV type equations in which the coefficients are not constants. Johnson's equation is one such equation. The researcher has used this model to study the interaction of waves. It has been found that three-wave interaction is possible, there is transfer of energy between the waves and the energy is not conserved during interaction. |
| Description: | Department of mathematics, Cochin University of Science And Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3348 |
| Files | Size |
|---|---|
| Dyuthi-T1306.pdf | (3.402Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.