Thomas Lee, S; Suresh, Kumar P; Unnikrishnan, K P; Nampoori, V P N; Girijavallabhan, C P; Sugunan, S; Radhakrishnan, P(Department of Applied Chemistry, May 15, 2003)
[+]
[-]
Abstract:
In this communication, we discuss the details of fabricating an off-line fibre
optic sensor (FOS) based on evanescent wave absorption for detecting trace
amounts of Fe3+ in water. Two types of FOS are developed; one type uses
the unclad portion of a multimode silica fibre as the sensing region whereas
the other employs the microbent portion of a multimode plastic fibre as the
sensing region. Sensing is performed by measuring the absorption of the
evanescent wave in a reagent medium surrounding the sensing region. To
evaluate the relative merits of the two types of FOS in Fe3+ sensing, a
comparative study of the sensors is made, which reveals the superiority of
the latter in many respects, such as smaller sensing length, use of a double
detection scheme (for detecting both core and cladding modes) and higher
sensitivity of cladding mode detection at an intermediate range of
concentration along with the added advantage that plastic fibres are
inexpensive. A detection limit of 1 ppb is observed in both types of fibre and
the range of detection can be as large as 1 ppb–50 ppm. All the
measurements are carried out using a LabVIEW set-up.
Nampoori, V P N; Suresh, Kumar P; Unnikrishnan, K P; Thomas Lee, S; Girijavallabhan, C P; Sugunan, S; Radhakrishnan, P(International School of Photonics, May 15, 2003)
[+]
[-]
Abstract:
In this communication, we discuss the details of fabricating an off-line fibre
optic sensor (FOS) based on evanescent wave absorption for detecting trace
amounts of Fe3+ in water. Two types of FOS are developed; one type uses
the unclad portion of a multimode silica fibre as the sensing region whereas
the other employs the microbent portion of a multimode plastic fibre as the
sensing region. Sensing is performed by measuring the absorption of the
evanescent wave in a reagent medium surrounding the sensing region. To
evaluate the relative merits of the two types of FOS in Fe3+ sensing, a
comparative study of the sensors is made, which reveals the superiority of
the latter in many respects, such as smaller sensing length, use of a double
detection scheme (for detecting both core and cladding modes) and higher
sensitivity of cladding mode detection at an intermediate range of
concentration along with the added advantage that plastic fibres are
inexpensive. A detection limit of 1 ppb is observed in both types of fibre and
the range of detection can be as large as 1 ppb–50 ppm. All the
measurements are carried out using a LabVIEW set-up.
Sivasankara Pillai,V N; Radhakrishnan, P; Nampoori, V P N; Girijavallabhan, C P; Suresh, Kumar P(Journal of Optics : A Pure and Applied Optics, March 8, 2002)
[+]
[-]
Abstract:
A fibre optic technique for detecting trace amounts of nitrite compounds in
water is described. The off-line fibre optic sensor outlined here is based on
evanescent field absorption in a test solution formed by the reaction of nitrite
compounds in water with suitable chemical reagents. A short unclad portion
of a plastic clad silica fibre acts as the sensing region. The experimental
results clearly establish the usefulness of the present technique for detecting
very low concentrations of the order of 1 ppb (parts per billion) of nitrite
compounds with a large dynamic range of 1–1000 ppb. Such a high
sensitivity enables the present device to be used for measuring the nitrite
content in drinking water.