URI: | http://dyuthi.cusat.ac.in/purl/1842 |
Files | Size |
---|---|
Dyuthi-T0263.pdf | (4.978Mb) |
Abstract: | This thesis aims to develop new toughened systems for epoxy resin via physical and chemical modifications. Initially the synthesis of DGEBA was carried out and the properties compared with that of the commercial sample. Subsequently the modifier resins to be employed were synthesized. The synthesized resin were characterized by spectroscopic method (FTIR and H NMR), epoxide equivalent and gel permeation chromatography. Chemical modification involves the incorporation of thermoset resins such a phenolics, epoxy novolacs, cardanol epoxides and unsaturated polyester into the epoxy resin by reactive belnding. The mechanical and thermal properties of the blends were studied. In the physical modification route, elastomers, maleated elastomers and functional elastomers were dispersed as micro-sized rubber phase into the continuous epoxy phase by a solution blending technique as against the conventional mechanical blending technique. The effect of matrix toughening on the properties of glass reinforced composites and the effect of fillers on the properties of commercial epoxy resin were also investigated. The blends were characterized by thermo gravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, scanning electron microscopy and mechanical property measurements. Among the thermoset blends, substantial toughening was observed in the case of epoxy phenolic novolacs especially epoxy para cresol novolac (ECN). In the case of elastomer blending , the toughest blends were obtained in the case of maleic anhydride grafted NBR. Among functional elastomers the best results were obtained with CTBN. Studies on filled and glass reinforced composites employing modified epoxy as matrix revealed an overall improvement in mechanical properties |
URI: | http://dyuthi.cusat.ac.in/purl/759 |
Files | Size |
---|---|
Dyuthi-T0257.pdf | (5.992Mb) |
Abstract: | Industrialisation affects air, water, and soil. Industrial effluents which enter the aquatic environment either by direct disposal or through run off, affect living organisms at morphological and physiological levels. In any living tissue toxic materials exert their effects first at molecular and biochemical levels (Robbins and Angell, 1976). Most of the industrial effluents contain elevated concentrations of organic and inorganic chemicals capable of eliciting stimulatory or inhibitory effects on the metabolism of aquatic organisms. Heavy metals form an important group of environmental pollutants. Effects of pollution on the aquatic environment by heavy metals have received considerable attention in recent years due to their toxicity even at very low levels, persistence in the environment, and chances of getting biomagnified. A pollutant that does not affect a particular process under normal unstressed condition may affect the ability of the animal to adjust to changing environmental conditions which ultimately decrease its chances of survival (Thurberg et al., 1973 |
Description: | School of Environmental Studies, Cochin University of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3737 |
Files | Size |
---|---|
Dyuthi-T1691.pdf | (3.191Mb) |
Abstract: | The present study involved investigation of the lethal and sublethal effects of three pesticides individually. The pesticides are the commercial formulations of DDT (organochlorine).Dime— cron (organophosphate) and Gramoxone (paraquat dichloride).Aspects like individual toxicity, modulations in the activities of some selected enzymes, consequent to exposure to sub lethal levels of pesticides, sub lethal effects onperipheral haematology and alterations caused on the tissue architecture of brain, gills and liver, have been documented. Attempts have been made to analyse the impact of pesticides, added at realistic Levels to the experimental media, on the life and activity of Etroplus maculatus |
Description: | Division of Pkuflxua Biology, Microbiology and Biochemistry, School of Marine Sciences, Cochin University of Science and Tehnology |
URI: | http://dyuthi.cusat.ac.in/purl/3169 |
Files | Size |
---|---|
Dyuthi-T1143.pdf | (9.561Mb) |
Abstract: | The present study was undertaken to evaluate the effectiveness of a few physico-chemical and biological methods for the treatment of effluents from natural rubber processing units. The overall objective of this study is to evaluate the effectiveness of certain physico-chemical and biological methods for the treatment of effluents from natural rubber processing units. survey of the chemical characteristics of the effluents discharged from rubber processing units showed that the effluents from latex concentration units were the most polluting |
Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3486 |
Files | Size |
---|---|
Dyuthi-T1448.pdf | (2.387Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1114 |
Files | Size |
---|---|
Ambika G 1988.pdf | (1.229Mb) |
Abstract: | It has become clear over the last few years that many deterministic dynamical systems described by simple but nonlinear equations with only a few variables can behave in an irregular or random fashion. This phenomenon, commonly called deterministic chaos, is essentially due to the fact that we cannot deal with infinitely precise numbers. In these systems trajectories emerging from nearby initial conditions diverge exponentially as time evolves)and therefore)any small error in the initial measurement spreads with time considerably, leading to unpredictable and chaotic behaviour The thesis work is mainly centered on the asymptotic behaviour of nonlinear and nonintegrable dissipative dynamical systems. It is found that completely deterministic nonlinear differential equations describing such systems can exhibit random or chaotic behaviour. Theoretical studies on this chaotic behaviour can enhance our understanding of various phenomena such as turbulence, nonlinear electronic circuits, erratic behaviour of heart and brain, fundamental molecular reactions involving DNA, meteorological phenomena, fluctuations in the cost of materials and so on. Chaos is studied mainly under two different approaches - the nature of the onset of chaos and the statistical description of the chaotic state. |
Description: | Department of physics, Cochin University of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3315 |
Files | Size |
---|---|
Dyuthi-T1288.pdf | (3.398Mb) |
Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2292 |
Files | Size |
---|---|
Dyuthi-T0584.pdf | (6.990Mb) |
Abstract: | The current research investigates the possibility of using unmodified and modified nanokaolin, multiwalled carbon nanotube (MWCNT) and graphene as fillers to impart enhancement in mechanical, thermal, and electrical properties to the elastomers. Taking advantage of latex blending method, nanoclay, MWCNT and graphene dispersions, prepared by ultra sound sonication are dispersed in polymer latices. The improvement in material properties indicated better interaction between filler and the polymer.MWCNT and graphene imparted electrical conductivity with simultaneous improvement in mechanical properties. Layered silicates prepared by microwave method also significantly improve the mechanical properties of the nanocomposites. The thesis entitled ‘Studies on the use of Nanokaolin, MWCNT and Graphene in NBR and SBR’ consists of ten chapters. The first chapter is a concise introduction of nanocomposites, nanofillers, elastomeric matrices and applications of polymer nanocomposites. The state-of-art research in elastomer based nanocomposites is also presented. At the end of this chapter the main objectives of the work are mentioned. Chapter 2 outlines the specifications of various materials used, details of experimental techniques employed for preparing and characterizing nanocomposites. Chapter3 includes characterization of the nanofillers, optimsation of cure time of latex based composites and the methods used for the preparation of latex based and dry rubber based nanocomposites. Chapter4 presents the reinforcing effect of the nanofillers in XNBR latex and the characterization of the nanocomposites. Chapter5 comprises the effect of nanofillers on the properties of SBR latex and their characterization Chapter 6 deals with the study of cure characteristics, mechanical and thermal properties and the characterization of NBR based nanocomposites. Chapter7 is the microwave studies of MWCNT and graphene filled elastomeric nanocomposites. Chapter 8 gives details of the preparation of layered silicates, their characterization and use in different elastomeric matrices. Chapter 9 is the study of mechanical properties of nanoclay incorporated nitrile gloves .Chapter 10 presents the summary and conclusions of the investigation. |
URI: | http://dyuthi.cusat.ac.in/purl/4940 |
Files | Size |
---|---|
Dyuthi-T2018.pdf.pdf | (6.333Mb) |
Description: | Department of Applied Chemistry, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/xmlui/purl/1964 |
Files | Size |
---|---|
Dyuthi-T0478.pdf | (44.66Mb) |
Abstract: | The thesis describes utilisation of reclaimed rubber, Whole Tyre Reclaim (WTR) produced from bio non- degradable solid pollutant scrap and used tyres. In this study an attempt has made to optimize the substitution of virgin rubber with WTR in both natural and synthetic rubber compounds without seriously compromising the important mechanical properties. The WTR is used as potent source of rubber hydrocarbon and carbon black filler. Apart from natural rubber (NR), Butadiene rubber (BR), Styrene butadiene rubber (SBR), Acrylonitrile butadiene rubber (NBR) and Chloroprene rubber (CR) were selected for study, being the most widely used general purpose and specialty rubbers. The compatibility problem was addressed by functionalisation of WTR with maleic anhydride and by using a coupling agent Si69.The blends were systematically evaluated with respect to various mechanical properties. The thermogravimetric analyses were also carried out to evaluate the thermal stability of the blends.Mechanical properties of the blends were property and matrix dependant. Presence of reinforcing carbon black filler and curatives in the reclaimed rubber improved the mechanical properties with the exception of some of the elastic properties like heat build up, resilience, compression set. When WTR was blended with natural rubber and synthetic rubbers, as the concentration of the low molecular weight, depolymerised WfR was increased above 46-weight percent, the properties deteriorates.When WTR was blended with crystallizing rubbers such as natural rubber and chloroprene rubber, properties like tensile strength, ultimate elongation were decreased in presence of WTR. Where as in the case of blends of WTR with non-crystallizing rubbers reinforcement effect was more prominent.The effect of functionalisation and coupling agent was studied in three matrices having different levels of polarity(NBR, CR and SBR).The grafting of maleic anhydride on to WTR definitely improved the properties of its blends with NBR, CR and SBR, the effect being prominent in Chloroprene rubber.Improvement in properties of these blends could also achieved by using a coupling agent Si69. With this there is apparent plasticizing effect at higher loading of the coupling agent. The optimum concentration of Si69 was 1 phr for improved properties, though the improvements are not as significant as in the case of maleic anhydride grafting.Thermal stability of the blend was increased by using silane-coupling agent. |
Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2191 |
Files | Size |
---|---|
Dyuthi-T0543.pdf | (5.640Mb) |
Abstract: | This thesis Entitled Studies on the Utilization of selected Species of sharks. The present study is the result of work carried out for 5 years, during the period from April, 1983 to March 1988. The materials were collected from the catches of the Government of India vessels, operated along the south west coast of India and landed in the Integrated Fisheries Project, Cochin—16. The sharks were caught by different types of gears such as bottom trawls, pelagic trawls, long line etc. A number of species of sharks were landed during this period and three species were selected for the present study namely Scoliodon palasorra (bleeker 1853, grey Shark), Carcharhinus limbatus (valenciennes 1839,black tip shark ) and centrophorus granulosus (bloch and schneider 1801 ,spiny shark). During this study period the quantity of shark utilized was 12,55,942 kg out of which 9.71% used for the production of Dressed shark; 36.21% for the production of Fillets; 49.09% converted into Dried shark and 4.99% was domesticallyy marketed as whole form. Besides this 526 kg of dried shark fin and 289.25 kg of shark fin rays were produced.The effect of Smoking of shark fillets and minced meat at different temperature were also studied during this period. Canning of cooked shark meat, smoked fillets and fish balls were carried out in media like brine, vegetable oil, tomato sauce etc. The quality of smoked fillets in vegetable oil was found superior to other canned products from shark meat.During this study an attempt was also made to evaluate the commercial processing of shark resources and found feasible. |
Description: | Depatment of marine science.Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3138 |
Files | Size |
---|---|
Dyuthi-T1112.pdf | (7.822Mb) |
Abstract: | The present study on the vertical structure of horizontal wind variability in the surface boundary layer over Sriharikota. Based on clock wind speed and direction measuring meteorological tower facility from seven levels in the 100 m layer. The study on wind variability and elliptical approximation of wind hodographs investigated for this tropical coastal station established that Sriharikota is of meso-scale weather entity. Wind variability ratio increases from lower levels to upper levels. In South West monsoon months the station is of high ratio values and it gets affected with meso-scale weather features like thunderstorms. Average total shears are observed greater values than scalar shears. Scalar shears are high in the lowest shear levels compared to upper levels. Semi diurnal types of oscillation in average total shears are found in south west monsoon months. During cyclonic storm passage it is observed that there can be significant difference in mean wind speed from 10 m to 100 m level, but it is not so for peak wind speeds. The variations in wind variability ratio in different months is clearly depicted its strong link to define meso-scale or synoptic –scale forcing domination for this station. Meso-scale forcing is characterized by diurnal wind variability and synoptic- scale forcing by interdiurnal wind variability. |
URI: | http://dyuthi.cusat.ac.in/purl/28 |
Files | Size |
---|---|
Dyuthi-T0253.pdf | (5.720Mb) |
Abstract: | The ability of aroylhydrazones to bind with transition metals is a developing area of research interest and the coordinating properties of hydrazones can be tuned by the appropriate choice of parent aldehyde or ketone and the hydrazide. So in the present work we selected four different aroylhydrazones as principal ligands. Introduction of heterocyclic bases like 1,10-phenanthroline, 2,2′-bipyridine, 3-picoline and pyridine leads to the syntheses of mixed ligand metal chelates which can cause different bonding modes, spectral properties and geometries in coordination compounds. The importance of aroylhydrazones and their complexes in various fields and their interesting coordinating properties stimulate our interest in the investigation of transition metal chelates with four different aroylhydrazones. The aroylhydrazones selected are 4-benzyloxy-2-hydroxybenzaldehyde-4-nitrobenzoylhydrazone dimethylformamide monosolvate, 5-bromo-2-hydroxy-3-methoxybenzaldehyde nicotinoylhydrazone dihydrate methanol monosolvate, 4-diethylamino-2- hydroxybenzaldehyde nicotinoylhydrazone monohydrate and 2-benzoylpyridine- 4-nitrobenzoylhydrazone. The selection of 4-benzyloxy-2-hydroxybenzaldehyde- 4-nitrobenzoylhydrazone was based on the idea of developing ligands having D-π-A general structure, so that the proligand and metal complexes exhibit NLO activity. Hence it is interesting to explore the coordinating capabilities of the synthesized hydrazones and to study the NLO activity of hydrazones and some of the metal complexes. |
URI: | http://dyuthi.cusat.ac.in/purl/4944 |
Files | Size |
---|---|
Dyuthi-T 2022.pdf | (6.812Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1698 |
Files | Size |
---|---|
Dyuthi-T0259.pdf | (1.520Mb) |
Abstract: | Extensive investigations on the distribution and biology of skipjack tuna are available but less is known of the bait fishes on which this fishery depends and what is known is inadequate, fragmentary and of cursory nature. The information available on tuna livebait fishes of Lakshadweep are mainly cofined to short term surverys aimed at estimating theiravailability and abundance. Reports on the biology of a few species from Minicoy are also present in the literature. This study was, therefore, prompted by a paucity of information on 1) the livebits of Minicoy, 2) livebait fishery of the northern islands and 3) knowledge of livebait ecology |
Description: | School Of Marine Sciences Cochin University Of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3667 |
Files | Size |
---|---|
Dyuthi-T1534.pdf | (5.017Mb) |
Abstract: | Two-photon absorption spectrum of aniline is recorded using thermal lens effect with optical parametric oscillator as the pump source. Studies show that the two-photon absorption spectrum observed corresponds to I Al -. I B2 transition of aniline. |
URI: | http://dyuthi.cusat.ac.in/purl/2471 |
Files | Size |
---|---|
Dyuthi-P0245.pdf | (376.1Kb) |
URI: | http://dyuthi.cusat.ac.in/purl/1702 |
Files | Size |
---|---|
Dyuthi-T0260.pdf | (3.299Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1121 |
Files | Size |
---|---|
Saseendran Pillai P R 1982.PDF | (202.1Kb) |
Abstract: | The thesis presented here includes the designing of underwater transducer arrays, taking into account the ‘interaction effects’ [30] among the closely packed radiators. Methods of minimizing the ‘interaction effects‘ by modifying the radiating aperture, are investigated. The need for this study arises as it is one of the important peculiar limitations that stands in the way of achieving maximum range of transmission of acoustic signals. Application of the modified array format for the generation of narrow beam low frequency sound waves, through nonlinear interactions, is discussed. Other techniques that can be advantageously exploited in array synthesis are also investigated |
Description: | Department of electronics and communication systems, Cochin University of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3285 |
Files | Size |
---|---|
Dyuthi-T1259.pdf | (7.941Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.