| Abstract: | Kerala was the pioneer in modern seafood processing and exporting. But now the industry is Iacingalot of problems due to low productivity and deterioration in the quality of the products. only about 17% of the installed freezing capacity in sea food processing industry was reported to be utilised during 1979-80. The price of the export commodities its decided by the buyers based on international supply and demand pattern and based on the strength and weakness of dollar/yen. The only way to increase the profitability of the processors is to reduce the cost of production to the possible extent. The individual processors find it difficult to continue in this field due to low productivity and quality problems. The main objectives of the research are to find out how the production is being managed in the seafood processing(freezing) 17industry in Kerala and the reasons for low productivity and poor quality of the products. The study includes a detailed analysis of Location of the factories. Layout Purchase, production and storage patterns. Production planning and scheduling. Work Measurement of the processing of important products. Quality Control and Inspection. Management Information System |
| Description: | Department of Industrial fisheries, Cochin University of Science And Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3584 |
| Files | Size |
|---|---|
| Dyuthi-T1591.pdf | (6.421Mb) |
| Abstract: | Latex protein allergy is a serious problem faced by users of natural rubber latex products. This is severe in health care workers, who are constantly using latex products like examination gloves, surgical gloves etc. Out of the total proteins only a small fraction is extractable and only these proteins cause allergic reactions in sensitized people. Enzymic deproteinisation of latex and leaching and chlorination of latex products are the common methods used to reduce the severity of the problem.Enzyme deproteinisation is a cubersome process involving high cost and process loss.Physical properties of such films are poor. Leaching is a lengthy process and in leached latex products presence of extractable proteins is observed on further storing. Chlorination causes yellowing of latex products and reduction in tensile properties.In this context a more simple process of removal of extractable proteins from latex itself was investigated. This thesis reports the application of poly propylene glycol (PPG) to displace extractable proteins from natural latex. PPG is added to 60 % centrifuged natural latex to the extent of 0.2 % m/rn, subssequently diluted to 30 % dry rubber content and again concentrated to obtain a low protein latex.Dilution of concentrated latex and subsequent concentration lead to a total reduction in non - rubber solids in the concentrate, especially proteins and reduction in the ionic concentration in the aqueous phase of the latex. It has been reported that proteins in natural rubber / latex affect its behaviour in the vulcanisation process. Ionic concentration in the aqueous phase of latex influence the stability, viscosity and flow behaviour of natural latex. Hence, a detailed technological evaluation was carried out on this low protein latex. In this study, low protein latex was compared with single centrifuged latex ( the raw material to almost every latex product), double centrifuged latex ( because dilution and second concentration of latex is accompanied by protein removal to some extent and reduction in the ionic concentration of the aqueous phase of latex.). Studies were conducted on Sulphur cure in conventional and EV systems under conditions of post ~ cure and prevulcanisation of latex. Studies were conducted on radiation cure in latex stage. Extractable protein content in vulcanised low protein latex films are observed to be very low. lt is observed that this low protein latex is some what slower curing than single centrifuged latex, but faster than double centrifuged latex. Modulus of low protein latex films were slightly low. In general physical properties of vulcanised low protein latex films are only siightly lower than single centrifuged latex. Ageing properties of the low protein latex films were satisfactory. Viscosity and flow behaviour of low protein latex is much better than double centrifuged latex and almost comparable to single centrifuged latex. On observing that the physical properties and flow behaviour of low protein latex was satisfactory, it was used for the preparation of examination gloves and the gloves were evaluated. It is observed that the properties are conforming to the Indian Standard Specifications. It is thus observed that PPG treatment of natural latex is a simple process of preparing low protein latex. Extractable protein content in these films are very low.The physical properties of the films are comparable to ordinary centrifuged latex and better than conventionally deprotenized latex films. This latex can be used for the production of examination gloves. |
| Description: | Rubber Research Institute |
| URI: | http://dyuthi.cusat.ac.in/purl/3130 |
| Files | Size |
|---|---|
| Dyuthi-T1104.pdf | (6.697Mb) |
| Abstract: | The results of an investigation on the limits of the random errors contained in the basic data of Physical Oceanography and their propagation through the computational procedures are presented in this thesis. It also suggest a method which increases the reliability of the derived results. The thesis is presented in eight chapters including the introductory chapter. Chapter 2 discusses the general theory of errors that are relevant in the context of the propagation of errors in Physical Oceanographic computations. The error components contained in the independent oceanographic variables namely, temperature, salinity and depth are deliniated and quantified in chapter 3. Chapter 4 discusses and derives the magnitude of errors in the computation of the dependent oceanographic variables, density in situ, gt, specific volume and specific volume anomaly, due to the propagation of errors contained in the independent oceanographic variables. The errors propagated into the computed values of the derived quantities namely, dynamic depth and relative currents, have been estimated and presented chapter 5. Chapter 6 reviews the existing methods for the identification of level of no motion and suggests a method for the identification of a reliable zero reference level. Chapter 7 discusses the available methods for the extension of the zero reference level into shallow regions of the oceans and suggests a new method which is more reliable. A procedure of graphical smoothening of dynamic topographies between the error limits to provide more reliable results is also suggested in this chapter. Chapter 8 deals with the computation of the geostrophic current from these smoothened values of dynamic heights, with reference to the selected zero reference level. The summary and conclusion are also presented in this chapter. |
| Description: | School of marine sciences, Cochin University of Science And Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3346 |
| Files | Size |
|---|---|
| Dyuthi-T1305.pdf | (7.288Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/1168 |
| Files | Size |
|---|---|
| Neelakandan Namboodiripad K S 1984.PDF | (436.5Kb) |
| Abstract: | In this study the quality and process control factors during the production and storage of salted dried fish products. The study reveals that quantity of dry fish production in the state is decreasing and dry fish processing industry should be encouraged by central and state governments. The dry and wet salting may be carried out to a period of 4 to 8 hours respectively and time may depend on temperature, size, and concentration of medium. Demand is an unavoidable factor for sale of fish. The packed dry salted lots kept at room temperature are useful only for 20 days. The refrigerator- stored lots had more storage life and nutritional content are good up to 3 months. The cold storage stored dry salted lot had more storage life than the wet salted lot. The use of preservatives in salting is encouraged to reduce pH. The low temperature preservation maintains the nutritional value and quality for long period. It further encourages the labeling of nutritional value of dry fish as in tinned products. |
| URI: | http://dyuthi.cusat.ac.in/purl/87 |
| Files | Size |
|---|---|
| Dyuthi-T0254.pdf | (13.47Mb) |
| Abstract: | The present study focused on the quality of rainwater at various land use locations and its variations on interaction with various domestic rainwater harvesting systems.Sampling sites were selected based upon the land use pattern of the locations and were classified as rural, urban, industrial and sub urban. Rainwater samples were collected from the south west monsoon of May 2007 to north east monsoon of October 2008, from four sampling sites namely Kothamangalam, Emakulam, Eloor and Kalamassery, in Ernakulam district of the State of Kerala, which characterized typical rural, urban, industrial and suburban locations respectively. Rain water samples at various stages of harvesting were also collected. The samples were analyzed according to standard procedures and their physico-chemical and microbiological parameters were determined. The variations of the chemical composition of the rainwater collected were studied using statistical methods. It was observed that 17.5%, 30%, 45.8% and 12.1% of rainwater samples collected at rural, urban, industrial and suburban locations respectively had pH less than 5.6, which is considered as the pH of cloud water at equilibrium with atmospheric CO,.Nearly 46% of the rainwater samples were in acidic range in the industrial location while it was only 17% in the rural location. Multivariate statistical analysls was done using Principal Component Analysis, and the sources that inf1uence the composition of rainwater at each locations were identified .which clearly indicated that the quality of rain water is site specific and represents the atmospheric characteristics of the free fall The quality of harvested rainwater showed significant variations at different stages of harvesting due to deposition of dust from the roof catchment surface, leaching of cement constituents etc. Except the micro biological quality, the harvested rainwater satisfied the Indian Standard guide lines for drinking water. Studies conducted on the leaching of cement constituents in water concluded that tanks made with ordinary portland cement and portland pozzolana cement could be safely used for storage of rain water. |
| Description: | School of Engineering, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2123 |
| Files | Size |
|---|---|
| Dyuthi-T0474.pdf | (4.023Mb) |
| Abstract: | From the point of view of rational exploitation and proper management of the fishery resources as well as for the development of intensive aquaculture of fishes through selective breeding, brood stock development, domestication and genetic improvement, a sound knowledge of reproductive biology and physiology of the candidate species is of great importance. In recent times, a wealth of information on maturity, spawning habits, spawning periodicity, spawning season, size at maturity and fecundity of commercially important fishes has been generated. Gametogenesis involves the transformation of Primordial germ cells in the gonads into specialised cells or gametes, namely ova in the female and sperms in male, through a series of complex morphological and cytological events. The formation of male gamete is known as spermatogenesis. In the female, the primary growth phase involving the formation of primary oocyte from oogonia is known as oogenesis, which would be followed by the secondary growth phase, in which considerable increase in the size of the oocyte occurs, due mainly to accumulation of yolk. This process is known as vitellogenesis, which would be followed by final maturation and ovulation of the ova. In the present work, basic aspects of maturation and spawning, salient features of gametogenesis and associated biochemical changes occurring during these processes in an important cultivable fish, Sillago sihama belonging to the family Sillaginidae have been investigated. |
| Description: | Department of Marine Sciences,Cochin University Of Science And Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3767 |
| Files | Size |
|---|---|
| Dyuthi-T1728.pdf | (7.364Mb) |
| Abstract: | The present investigation has been carried out to understand the process and events leading to maturation of the ovary and testis in the Indian white prawn Penaeus indicus. The study includes the classification of the ovarian maturity stages based on its colour, gonadosomatic index, oocyte diameter and morphological changes in the oocyte. Further the process of oogenesis has been investigated using light and electron microscopic techniques. A histochemical study of the ovary has also been carried out to determine the sequence in which yolk substances are synthesized or sequestered in the oocytes and also to elicit the nature of the penaeid yolk material. The process of spermatogenesis and the development of the spermatophore has been studied in detail using light and electron microscopic methods. In addition a brief histochemical study on the testis was also made to understand the nature of the organic reserves in the sperm cells. |
| Description: | Centre of Advanced Studies in Mariculture, Central Marine Fisheries Research Institute |
| URI: | http://dyuthi.cusat.ac.in/purl/3234 |
| Files | Size |
|---|---|
| Dyuthi-T1208.pdf | (5.814Mb) |
| Description: | School of Industrial Fisheries,Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2890 |
| Files | Size |
|---|---|
| Dyuthi-T0887.pdf | (17.62Mb) |
| Abstract: | At present, there is paucity of information regarding the breeding biology, especially from southeastern region, which differs in its climatic features from northeastern coastal areas, where some attempts have been made to study the biology of the fish, though not documented in detail (Jhingran and Natarajan, I969; Patnaik and Jena, 1976; Kowtal, 1977; Roy e_t _a_l_., I977). The present work, first to undertake detailed investigation into reproductive aspects of the fish from India is not only confined to biology, but extend to the study on histological as well as physiological changes in the processes associated with natural reproductive cycle. The main objective of the study is to develop a background for the standardisation of subsequent artificial propagation techniques for the Sea Dass The thesis is presented in three chapters. The first chapter; general introduction, surveys the literature pertaining to the status of research on Lates calcarifer with specific reference to reproduction and acquaculture. The second chapter entitled, materials and methods gives description regarding collection of specimens as well as samples in addition to the various analytical methodologies employed during the study. |
| Description: | School of marine sciences, Central institute of fisheries technology, Cochin University of Science And Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3449 |
| Files | Size |
|---|---|
| Dyuthi-T1408.pdf | (8.614Mb) |
| Abstract: | A study of the reproductive physiology of P. (P). semisulcatus wasundertaken as this information is an essential prerequisite for brood stock development for hatchery operations, and the results are embodied in this thesis. The thesis is presented in seven chapters. The protein, lipid and carbohydrate contents of ovary were estimated for the different vitellogenic phases. The protein, lipid, carbohydrate and cholesterol contents were estimated in testes and spermatophore.The thesis present the results of induced maturation experiments by eyestalk ablation, CNS extract injection and UV rays application on immature female prawns. |
| Description: | Central Marine Fisheries Research Institute |
| URI: | http://dyuthi.cusat.ac.in/purl/3197 |
| Files | Size |
|---|---|
| Dyuthi-T1171.pdf | (6.299Mb) |
| Abstract: | Latex waste products contain rubber hydrocarbon of very high quality, which is only lightly cross linked. Selected wastes such as thread waste and glove waste were modified into processable materials by a novel economic process and thermoplastic elastomers were prepared by blending these modified waste materials with high density polyethylene in various proportions. The mechanical properties as well as the rheological behaviour of these blends were evaluated and compared with those of the natural rubber-high density polyethylene blends. |
| URI: | http://dyuthi.cusat.ac.in/purl/869 |
| Files | Size |
|---|---|
| S Rajalekshmi a ... chanical.........,2002.PDF | (5.540Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/1193 |
| Files | Size |
|---|---|
| Gopalakrishna Murthy 1987.PDF | (416.4Kb) |
| Abstract: | The thesis entitled Studies on Thermal Structure in the Seas Around India. An attempt is made in this study to document the observed variability of thermal structure, both on seasonal and short-term scales, in the eastern Arabian Sea and southwestern Bay of Bengal, from the spatial and time series data sets from a reasonably strong data base. The present study has certain limitations. The mean temperatures are based on an uneven distribution of data in space and time. Some of the areas, although having a ‘full annual coverage, do not have adequate data for some months. Some portions in the area under study are having data gaps. The consistency and the coherence in the internal wave characteristics could not be examined due to non-availability of adequate data sets. The influence of generating mechanisms; other than winds and tides on the observed internal wave fields could not be ascertained due to lack of data. However, a comprehensive and intensive data collection can overcome these limitations. The deployment of moored buoys with arrays of sensors at different depths at some important locations for about 5 to 10 years can provide intensive and extensive data sets. This strong data base can afford to address the short-term and seasonal variability of thermal field and understand in detail the individual and collective influences of various physical and dynamical mechanisms responsible for such variability. |
| Description: | Naval Physical and Oceanographic Laboratory |
| URI: | http://dyuthi.cusat.ac.in/purl/3249 |
| Files | Size |
|---|---|
| Dyuthi-T1223.pdf | (4.602Mb) |
| Description: | Department of Physics, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2572 |
| Files | Size |
|---|---|
| Dyuthi-T0701.pdf | (6.292Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/5244 |
| Files | Size |
|---|---|
| Dyuthi T-2280.pdf | (646.7Kb) |
| Abstract: | Latex waste like glove waste was effectively modified using a new reclaiming agent, thiocarbanilide. This modified waste was blended with linear low-density polyethylene (LLDPE) to develop a novel thermoplastic elastomer. Both uncrosslinked and dynamically crosslinked blends were prepared and their properties were studied. The results were found to be comparable to those of conventional thermoplastic elastomers. |
| URI: | http://dyuthi.cusat.ac.in/purl/810 |
| Files | Size |
|---|---|
| S Rajalekshmi and Rani Joseph,studies on...PDF | (7.257Mb) |
| Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology. |
| URI: | http://dyuthi.cusat.ac.in/purl/2296 |
| Files | Size |
|---|---|
| Dyuthi-T0588.pdf | (5.071Mb) |
| Abstract: | Thermoplastic elastomers are a relatively new class of materials which compete with thermoset rubbers in some areas and thermoplastic materials in other areas. The main thrust of the present investigation is a comparative study’ on commercially .available triblock. styrene thermoplastic elastomers and those derived from blends of acrylonitrile-butadiene rubber and poly(vinyl chloride). The styrene—based thermoplastic elastomers are gaining acceptance as a replacement for both natural and synthetic rubber‘ in many‘ applications. TPEs based on blends of elastomers and plastics ix: the fastest growing segment of the broad class of thermoplastic elastomers. Broad applicability and simple technology of production are the attractive features of this class of TPES. NBR/PVC thermoplastic elastomers were selected for this investigation due to the versatility of PVC, its number one position, low cost. ability to Ina compounded into various flexible and rigid form with good physical and chemical and weathering properties etc., which will be passed over to PVC blends especially NBR/PVC blends which are known to form miscible systems |
| Description: | Department of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3576 |
| Files | Size |
|---|---|
| Dyuthi-T1551.pdf | (9.682Mb) |
| Abstract: | In the present study the nutrient dynamics and fertility of Kuttanad waters is addressed. Kuttanad represent a wetland system with considerable agricultural activities. The hydrographical features of the Kuttanad waters are controlled by discharges from Manimala, Meenachil, Pamba, Achencoil and Muvattupuzha rivers and also by tidal intrusions of saline waters from Cochin backwaters during summers. The fertility of these water bodies were significantly high and supported good agricultural production. Kuttanad water forms the southern part of this aquatic systems and is considered as the most productive zones. As a part of the management scheme for a higher agricultural activity, the Thannermukkam bund was constructed to block and regulate the intrusion of saline water. The increased use of artificial fertilizers along with stagnant character of the water body in this area has resulted in sharp decline in the water quality, productivity and aquatic resources. |
| URI: | http://dyuthi.cusat.ac.in/purl/79 |
| Files | Size |
|---|---|
| Dyuthi-T0359.pdf | (6.958Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.