| Abstract: | Microwave dielectric ceramics based on RETiTaO6 (RE = La, Cc, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Y, Er, Yb, Al, and In) were prepared using a conventional solid-state ceramic route. The structure and microstructure of the samples were analyzed using x-ray diffraction and scanning electron microscopy techniques. The sintered samples were characterized in the microwave frequency region. The ceramics based on Ce, Pr, Nd, Sm, Eu, Gd, Tb, and Dy, which crystallize in orthorhombic aeschynite structure, had a relatively high dielectric constant and positive T f while those based on Ho, Er, and Yb, with orthorhombic euxenite structure, had a low dielectric constant and negative Tf. The RETiTaO6 ceramics had a high-quality factor. The dielectric constant and unit cell volume of the ceramics increased with an increase in ionic radius of the rare-earth ions, but density decreased with it. The value of Tf increased with an increase in RE ionic radii, and a change in the sign of Tf occurred when the ionic radius was between 0.90 and 0.92 A. The results indicated that the boundary of the aeschynite to euxenite morphotropic phase change lay between DyTiTaO6 and HoTiTaO6. Low-loss ceramics like ErTiTaO6 (Er = 20.6, Qxf = 85,500), EuTiTaO6 (Er = 41.3, Qxf = 59,500), and YTiTaO6 (Er = 22.1, Q„xf = 51,400) are potential candidates for dielectric resonator applications |
| URI: | http://dyuthi.cusat.ac.in/purl/1451 |
| Files | Size |
|---|---|
| Microwave diele ... , Al, and In) ceramics.PDF | (3.601Mb) |
| Abstract: | Dielectric resonator ceramics with composition formula Ba[(D3+0.3 Bi0.2)Nb0.5]O3,where D3+=Y,Pr,Sm,Gd,Dy and Er,were prepared by the conventional ceramic preparation route |
| URI: | http://dyuthi.cusat.ac.in/purl/1441 |
| Files | Size |
|---|---|
| Microwave diele ... Y, Pr, Sm, Gd, Dy, Er).PDF | (2.529Mb) |
| Abstract: | Graphene has captured the attention of scientific community due to recently emerging high performance applications. Hence, studying its reinforcing effects on epoxy resin is a significant step. In this study, microwave exfoliated reduced graphene oxide (MERGO) was prepared from natural graphite for subsequent fabrication of epoxy nanocomposites using triethylenetetramine (TETA) as a curing agent via insitu polymerization. Thermogravimetric analysis (TGA), X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), C13 NMR spectroscopy, X-ray photoelectron spectroscopy (XPS) and ultravioletevisible (UVevis) spectroscopy were employed to confirm the simultaneous reduction and exfoliation of graphene oxide. The reinforcing effect of MERGO on epoxy resin was explored by investigating its static mechanical properties and dynamic mechanical analysis (DMA) at MERGO loadings of 0 to 0.5 phr. The micro-structure of epoxy/MERGO nanocomposites was investigated using scanning electron microscope (SEM), transmission electron microscope (TEM) and XRD techniques. The present work reports an enhancement of 32%, 103% and 85% in tensile, impact and flexural strength respectively of epoxy by the addition of even 0.25 phr MERGO. At this loading elastic and flexural moduli also increased by 10% and 65%, respectively. Single-edge-notch three-point-Bending (SEN-TPB) fracture toughness (KIC) measurements were carried out where a 63% increase was observed by the introduction of 0.25 phr MERGO. The interfacial interactions brought about by graphene also benefited the dynamic mechanical properties to a large extent in the form of a significant enhancement in storage modulus and slightly improved glass transition temperature. Considerable improvements were also detected in dielectric properties. The epoxy nanocomposite also attained an ac conductivity of 10 5 S/m and a remarkable increase in dielectric constant. The simple and cost effective way of graphene synthesis for the fabrication of epoxy/MERGO nanocomposites may be extended to the preparation of other MERGO based polymer nanocomposites. This remarkable class of materials has thrown open enormous opportunities for developing conductive adhesives and in microelectronics |
| Description: | Polymer 55 (2014) 3614e3627 |
| URI: | http://dyuthi.cusat.ac.in/purl/4694 |
| Files | Size |
|---|---|
| Microwave exfol ... rformance applications.pdf | (4.632Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/5478 |
| Files | Size |
|---|---|
| Dyuthi T-2520.pdf | (17.54Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/5452 |
| Files | Size |
|---|---|
| Dyuthi T-2495.pdf | (11.64Mb) |
| Abstract: | The semiconductor industry's urge towards faster, smaller and cheaper integrated circuits has lead the industry to smaller node devices. The integrated circuits that are now under volume production belong to 22 nm and 14 nm technology nodes. In 2007 the 45 nm technology came with the revolutionary high- /metal gate structure. 22 nm technology utilizes fully depleted tri-gate transistor structure. The 14 nm technology is a continuation of the 22 nm technology. Intel is using second generation tri-gate technology in 14 nm devices. After 14 nm, the semiconductor industry is expected to continue the scaling with 10 nm devices followed by 7 nm. Recently, IBM has announced successful production of 7 nm node test chips. This is the fashion how nanoelectronics industry is proceeding with its scaling trend. For the present node of technologies selective deposition and selective removal of the materials are required. Atomic layer deposition and the atomic layer etching are the respective techniques used for selective deposition and selective removal. Atomic layer deposition still remains as a futuristic manufacturing approach that deposits materials and lms in exact places. In addition to the nano/microelectronics industry, ALD is also widening its application areas and acceptance. The usage of ALD equipments in industry exhibits a diversi cation trend. With this trend, large area, batch processing, particle ALD and plasma enhanced like ALD equipments are becoming prominent in industrial applications. In this work, the development of an atomic layer deposition tool with microwave plasma capability is described, which is a ordable even for lightly funded research labs. |
| URI: | http://dyuthi.cusat.ac.in/purl/5101 |
| Files | Size |
|---|---|
| Dyuthi-T 2167 .pdf | (21.87Mb) |
| Abstract: | A phantom that exhibits complex dielectric properties similar to low-water-content biological tissues over the electromagnetic spectrum of 2000–3000 MHz has been synthesized from carbon black, graphite powder, and poly vinyl acetate (PVA)-based adhesive. The material overcomes various problems that are inherent in conventional phantoms such as decomposition and deterioration due to the invasion of bacteria or mold. The absorption coefficients of the material for various concentrations of carbon and graphite are studied. A combination of 50% poly-vinyl-acetate-based adhesive, 20% carbon, and 30% graphite exhibits a high absorption coefficient, which suggests another application of the material as a good microwave absorber for the interior lining of tomographic chamber in microwave imaging. The cavity-perturbation technique is adopted to study the dielectric properties of the material. |
| URI: | http://dyuthi.cusat.ac.in/purl/2734 |
| Files | Size |
|---|---|
| Dyuthi-P00368.pdf | (140.7Kb) |
| URI: | http://dyuthi.cusat.ac.in/purl/5557 |
| Files | Size |
|---|---|
| Dyuthi T-2599.pdf | (3.405Mb) |
| Abstract: | Continental shelf is of particular significance in marine geology , because it links the two basically different structural zones in the earth's crust; the continents and ocean basins. The shelf area has much wider importance in many fields of activity such as scientific, economic, social, political and strategic. The pace of development has ultimately put pressure on mankind to look for exploitable resources and accessibility to the continental shelf area and beyond. Added to the above, the developmental activities in the coastal area would readily and directly influence the innershelf sediments. This situation demands a thorough geological knowledge of the continental shelf area. Moreover, a successful management of the continental shelf zone requires an optimum data base on the physico-chemical nature of the shelf sediments. Although sedimentological studies were carried out along the western continental shelf of India, a well documented systematic study of the inner shelf off Trivandrum coast is still found to be lacking. Considering the physiographic settings and the vicinity of two renowned placer deposits at Chavara and Manavalakurichi, such a sedimetological inventory has become all the more vital. In view of the above, a research programme has been drawn up to account the salient sedimentological and mineralogical aspects of the innershelf and beach sediments between Paravur and Kovalam, Trivandrum district, Kerala (latitudes 8° 7'00" to 8° 47'45" and longitudes 76°43'00" to 77° 40'45"). The findings are presented in six chapters formatted to address the aim of this research. |
| Description: | Marine Geology Division School of Marine Sciences Cochin University of Science And Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3731 |
| Files | Size |
|---|---|
| Dyuthi-T1696.pdf | (10.46Mb) |
| URI: | http://dyuthi.cusat.ac.in/xmlui/purl/1893 |
| Files | Size |
|---|---|
| Dyuthi-T0361.pdf | (10.64Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/5603 |
| Files | Size |
|---|---|
| Dyuthi T-2644.pdf | (6.026Mb) |
| Abstract: | Mi ni -trawls are operated by the artisanal fishermen from small wooden non-motorised canoes. Shrimp, fish and crab trawls wi th head rope length rang ing from 3.5-8 m, made of Po lyethy lene mon ofila ment (PE) twisted and Polyamide mullifilament (PA) rigged to 6-7 kll fla t rectangular wooden otter boards are common in the lower reaches of Kariango de and Chandrag iri rive rs. Since the trawling speed is less, ca tch is do minated by crus taceans. Less scope ratio also may be affecting the catching efficiency of the gear. This pape r deals with the design, operation and economics of mini traw ling carried out by a group of fisherme n in the above rivers of Kasargod district Kerala state. |
| Description: | Fishery Technology 2005, Vol. 42(1) PP 41 - 46 |
| URI: | http://dyuthi.cusat.ac.in/purl/4125 |
| Files | Size |
|---|---|
| Mini-trawls for ... hing Kasargod District.pdf | (1.214Mb) |
| Abstract: | In this thesis, a detailed attempt has been made to understand the general hydrography of the upper 300m of the water column, in the eastern Arabian Sea and the western Bay of Bengal, the two contrasting basins in the northern Indian Ocean, using recently collected data sets of Marine Research-Living Resources (MR-LR) assessment programme, funded by Department of Ocean Development, from various cruises, pertaining to different seasons. Initially it discuss the general hydrography of the west and east coasts of India are covered, in the context of mixed layer processes. The study describes the materials and methods . To compare the hydrography of the AS and BOB, a unique MLD(Mixed Layer Depth) definition for AS and BOB is essential, for which the 275 CTD profiles were used. A comparison has been made among the various MLD criteria with the actual MLD. The monthly evolution of MLD, barrier layer thickness and the role of atmospheric forcing on the dynamics of the mixed layer in the AS and BOB were studied. The general hydrography along the west coast of India is described. The upwelling/downwelling, winter cooling processes, in the context of chemical and biological parameters, are also addressed. Finally the general hydrography of the Bay of Bengal is covered. The most striking feature in the hydrography are the signature of an anticyclonic subtropical gyre during spring intermonsoon and a cold core eddy during winter monsoon. The TTS(Typical Tropical Structure) of the euphotic layer was also investigated. |
| URI: | http://dyuthi.cusat.ac.in/purl/779 |
| Files | Size |
|---|---|
| Dyuthi-T0192.pdf | (5.648Mb) |
| URI: | http://dyuthi.cusat.ac.in/xmlui/purl/2021 |
| Files | Size |
|---|---|
| Dyuthi-T0432.pdf | (2.889Mb) |
| Abstract: | The magnetic properties of Mn-doped ZnO (ZnO:Mn) nanorods grown by hydrothermal process at a temperature of 200 8C and a growth time of 3 h have been studied. The samples were characterized by using powder X-ray diffraction with Rietveld refinement, scanning electron microscopy, energy-dispersive X-ray analysis and SQUID magnetometry. Mn (3 wt%) and (5 wt%)-doped ZnO samples exhibit paramagnetic and ferromagnetic behavior, respectively, at room temperature. The spin-glass behavior is observed from the samples with respect to the decrease of temperature. At 10 K, both samples exhibit a hysteresis loop with relatively low coercivity. The room-temperature ferromagnetism in 5 wt% Mn-doped ZnO nanorods is attributed to the increase in the specific area of grain boundaries, interaction between dopant Mn2þ ions substituted at Zn2þ site and the interaction between Mn2þ ions and Zn2þ ions from the ZnO host lattice |
| Description: | Phys. Status Solidi A 211, No. 5, 1155–1161 (2014) |
| URI: | http://dyuthi.cusat.ac.in/purl/4558 |
| Files | Size |
|---|---|
| Mn2þ-induced ro ... ermally grown Mn-doped.pdf | (986.9Kb) |
| Abstract: | Mn(II) complexes derived from a set of acylhydrazones were synthesised and characterized by elemental analyzes, IR, UV–vis and X-band EPR spectral studies as well as conductivity and magnetic susceptibility measurements. In the reported complexes, the hydrazones exist either in the keto or enolate form, as evidenced by IR spectral data. Crystal structures of two complexes are well established using single crystal X-ray diffraction studies. In both of these complexes two equivalent monoanionic ligands are coordinated in a meridional fashion using cis pyridyl, trans azomethine nitrogen and cis enolate oxygen atoms positioned very nearly perpendicular to each other. EPR spectra in DMF solutions at 77 K show hyperfine sextets and in some of the complexes the low intensity forbidden lines lying between each of the two hyperfine lines are also observed |
| Description: | Polyhedron 29 (2010) 3318–3323 |
| URI: | http://dyuthi.cusat.ac.in/purl/4706 |
| Files | Size |
|---|---|
| Mn(II) complexe ... and crystal structures.pdf | (466.6Kb) |
| Abstract: | Cluster based protocols like LEACH were found best suited for routing in wireless sensor networks. In mobility centric environments some improvements were suggested in the basic scheme. LEACH-Mobile is one such protocol. The basic LEACH protocol is improved in the mobile scenario by ensuring whether a sensor node is able to communicate with its cluster head. Since all the nodes, including cluster head is moving it will be better to elect a node as cluster head which is having less mobility related to its neighbours. In this paper, LEACH-Mobile protocol has been enhanced based on a mobility metric “remoteness” for cluster head election. This ensures high success rate in data transfer between the cluster head and the collector nodes even though nodes are moving. We have simulated and compared our LEACH-Mobile-Enhanced protocol with LEACHMobile. Results show that inclusion of neighbouring node information improves the routing protocol. |
| Description: | Advanced Computing and Communications, 2008. ADCOM 2008. 16th International Conference on |
| URI: | http://dyuthi.cusat.ac.in/purl/4135 |
| Files | Size |
|---|---|
| Mobility Metric based LEACH-Mobile Protocol.pdf | (272.3Kb) |
| Abstract: | Cluster based protocols like LEACH were found best suited for routing in wireless sensor networks. In mobility centric environments some improvements were suggested in the basic scheme. LEACH-Mobile is one such protocol. The basic LEACH protocol is improved in the mobile scenario by ensuring whether a sensor node is able to communicate with its cluster head. Since all the nodes, including cluster head is moving it will be better to elect a node as cluster head which is having less mobility related to its neighbours. In this paper, LEACH-Mobile protocol has been enhanced based on a mobility metric “remoteness” for cluster head election. This ensures high success rate in data transfer between the cluster head and the collector nodes even though nodes are moving. We have simulated and compared our LEACH-Mobile-Enhanced protocol with LEACHMobile. Results show that inclusion of neighbouring node information improves the routing protocol. |
| Description: | ADCOM 2008 |
| URI: | http://dyuthi.cusat.ac.in/purl/3857 |
| Files | Size |
|---|---|
| Mobility Metric based LEACH-Mobile Protocol.pdf | (272.3Kb) |
| Abstract: | The thesis is the outcome of the theoretical and experimental investigations on mocrostrip-fed printed strip monopole antenna.Finite ground plane has been effectively utilized to excite a new resonance near the fundamental mode by introducing another extended strip from the ground plane,without affecting compactness.Further size reduction was achieved by carrying out folding analysis on dual strip antenna and a compact folded dual strip antenna has been designed.Design methodologies for both the compact dual band antennas are presented.The proposed antennas can be used for mobile and WLAN applications due to wide bandwidth,moderate gain and omnidirectional radiation coverage. |
| Description: | Department of Electronics, Cochin University of Science and Technology. |
| URI: | http://dyuthi.cusat.ac.in/purl/2345 |
| Files | Size |
|---|---|
| Dyuthi-T0620.pdf | (11.95Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.