| Abstract: | The main aim of this study is to examine the deficiencies of the export development process and strategy in India and, to suggest, in the light of the findings of the above, measures for improvement. The marine products industry has been chosen as a case for a detailed investigation. The researcher conducts an evaluative study on the export potential for India’s marine products and trends in the international market for marine products. The thesis tries to identify the major hurdles in increasing exports of marine products from India. The evaluation of the adequacy and effectiveness of the measures taken to promote marine products exports is also undertaken |
| Description: | School of Management Studies, Cochin University of Science & Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3175 |
| Files | Size |
|---|---|
| Dyuthi-T1149.pdf | (5.493Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/1318 |
| Files | Size |
|---|---|
| Muhamed kutty K B 1989.PDF | (362.1Kb) |
| Abstract: | This thesis is a study in sales tax law, a study on the triple concept of export, import and inters—State sales. It is in seventeen chapters spread in five parts. The introductory is an overview. It presents the thematic thrust of what follows. Part two deals with incidence of sales tax on export and import and the scope of exemption. Part three focuses attention on the various dimensions of the problem of inter—State sale. Part four is an inquiry into parliamentary control on taxes over sales and purchases and highlights inter—State and intra-State implications of discriminatory tax. Part five contains the results of empirical study and the general conclusions of the thesis. In the past no attempt has been made to analyse on identical lines the problems dealt with in this thesis |
| Description: | Department of Law, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3219 |
| Files | Size |
|---|---|
| Dyuthi-T1193.pdf | (5.843Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/1598 |
| Files | Size |
|---|---|
| Dyuthi-T0112.pdf | (4.899Mb) |
| Abstract: | Export has assumed an important place in the development of any country and considered as the engine of economic growth. India requires huge amount of foreign exchange for its essential import and for achieving rapid growth. Millions of job opportunities have to be created to utilise the youth for nation building. Even though the country has different sources of foreign exchange, export earning is the safe way of obtaining it in the long run. Export of high valued traditional products not only gives foreign exchange, but also employment to large number of people. Spices are the traditional products of India whose production process is highly intensive in semi and unskilled labour, and high domestic and foreign market prices compared to other traditional products. The new world trade scenario with the establishment of WTO has affected India’s spices export considerably. The study examines the export performance of Indian spices in the WTO regime taking the export of major spices from 1985 to 2013 using the growth of export, trend and instability in growth rate, changes in the composition and direction of spices, export performance ratio and the prospects of spices in earning foreign exchange during the WTO period and Pre-WTO period. The analysis reveals that the overall performance of Indian spices exports during the WTO regime are satisfactory. Export volume and value increased much during this period. But the decrease in market share of spices export during the WTO period reflects that, the favourable conditions in the international market are not exploited by India. High Revealed Comparative Advantage (RCA) and Value Elasticity (EV) of major spices amidst the low export shares shows that export performance of Indian spices during the WTO regime was not mainly affected by external demand factors as suggested by Ragnar Nurkse in his Demand Deficiency Thesis, but because of internal supply factors as suggested in Supply Deficiency Thesis, (supported by K.S Dhinsha, Dacosta, Goddamwar,etc.). But the fluctuations of export during the recession and prosperity periods show that external demand is also a determinant of Indian spices export. From this one can conclude that both the domestic supply factors and foreign demand factors influence the export performance of Indian spices. The long term performance of Indian spices exports are mainly influenced by domestic supply factors as suggested by Supply Deficiency Thesis and short term performance is mostly influenced by external demand factors as suggested by Demand Deficiency Thesis. |
| Description: | Department of Applied Economics |
| URI: | http://dyuthi.cusat.ac.in/purl/5013 |
| Files | Size |
|---|---|
| Dyuthi-T2080.pdf | (5.204Mb) |
| Abstract: | Inspite of having two hotspots of biodiversity India is way long back in the ornamental fish trade. Large number of species can only foster the needs of the industry. The study aims to (1) to find the various indigenous, exotic ornamental fish species and ornamental shrimp species being exported from India, (2) to provide an overview of the trends in the Indian ornamental fish export industry. 287 indigenous fish species, 92 exotic fish species and 44 ornamental shrimps have been found to get exported from India. The export trend of the industry for the past ten years shows a declining state which is also reflected in the annual and compound annual growth rate. Ornamental fish industry has enormous potential in tropical countries like India. To expand trade, new technologies and policies will have to be developed which will help in attaining a sustainable industry. |
| Description: | Agric. Biol. J. N. Am., 2012, 3(11): 439-451 |
| URI: | http://dyuthi.cusat.ac.in/purl/4122 |
| Files | Size |
|---|---|
| Export trend of ... namental fish industry.pdf | (291.4Kb) |
| Abstract: | In the present environment, industry should provide the products of high quality. Quality of products is judged by the period of time they can successfully perform their intended functions without failure. The cause of the failures can be ascertained through life testing experiments and the times to failure due to different cause are likely to follow different distributions. Knowledge of this distribution is essential to eliminate causes of failures and thereby to improve the quality and the reliability of products. The main accomplishment expected to the study is to develop statistical tools that could facilitate solution to lifetime data arising in such and similar contexts |
| URI: | http://dyuthi.cusat.ac.in/purl/1011 |
| Files | Size |
|---|---|
| Dyuthi-T0111.pdf | (1.141Mb) |
| Abstract: | In Statistical Machine Translation from English to Malayalam, an unseen English sentence is translated into its equivalent Malayalam sentence using statistical models. A parallel corpus of English-Malayalam is used in the training phase. Word to word alignments has to be set among the sentence pairs of the source and target language before subjecting them for training. This paper deals with certain techniques which can be adopted for improving the alignment model of SMT. Methods to incorporate the parts of speech information into the bilingual corpus has resulted in eliminating many of the insignificant alignments. Also identifying the name entities and cognates present in the sentence pairs has proved to be advantageous while setting up the alignments. Presence of Malayalam words with predictable translations has also contributed in reducing the insignificant alignments. Moreover, reduction of the unwanted alignments has brought in better training results. Experiments conducted on a sample corpus have generated reasonably good Malayalam translations and the results are verified with F measure, BLEU and WER evaluation metrics. |
| Description: | 2012 International Conference on Advances in Computing and Communications |
| URI: | http://dyuthi.cusat.ac.in/purl/4160 |
| Files | Size |
|---|---|
| Extension schem ... cal Machine Translator.pdf | (219.2Kb) |
| Abstract: | The beta-glucosidase enzyme purified from the marine fungus, Aspergillus sydowii BTMFS 55 showed a good yield of enzyme production under solid state fermentation. The statistical optimization of the media components revealed that moisture content, concentration of peptone and inoculum are the major parameters which supported the maximal enzyme production. The purified enzyme showed low pH activity and stability, glucose tolerance and activation by ethanol. It could produce ethanol from wheat bran and rice straw by simultaneous saccharification and fermentation with yeast.The glucosidase purified from Aspergillus sydowii BTMFS 55 shows great potential for several biotechnological applications such as the production of bio-ethanol from agricultural biomass and improvement in the aromatic character of wines and fruit juices through the hydrolysis of flavour glucosidic precursors. There is immense scope for the application of this marine fungus in the biofuel production besides in other industries provided further studies are pursued in exploiting this enzyme and the organism particularly scale up studies with respect to application. There is also ample scope for cloning of the gene encoding beta-glucosidase in domesticated hosts such as Pichia pastoris or S. cerevisiae that can produce ethanol directly from cellulosic biomass. |
| Description: | Department of Biotechnology, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2807 |
| Files | Size |
|---|---|
| Dyuthi-T0828.pdf | (7.739Mb) |
| Abstract: | Four species of bacteria which included Pseudomonas fluorescens, Vibrio cho!erae and Vibrio costicola were observed to produce glutaminase both as extracellular and intracellular fractions. Comparatively both the fractions were higher in mineral media supplemented with 1% glutamine than in nutrient broth added with or without glutamine. Extracellular glutaminase production was about 2.6-6.8 times greater than the intracellular production by all the tested strains |
| Description: | BIOTECHNOLOGY LETTERS Volume 14 No.6 (june 1992) pp.471-474 |
| URI: | http://dyuthi.cusat.ac.in/purl/4248 |
| Files | Size |
|---|---|
| Extracellular L ... ion By Marine Bacteria.pdf | (201.2Kb) |
| Abstract: | Beauveria sp. BTMF S10 isolated from marine sediment produced extracellular L-glutaminase. Maximal L- glutaminase yield (46.9 U/ml) was obtained in a medium supplemented with 1% (w/v) yeast extract and sorbitol, 9% (w/v) sodium chloride and 0.2% (w/v) methionine, initial pH 9.0 and at 27 °C after 108 h. This enzyme was inducible and growth-associated. |
| Description: | World Journal of Microbiology & Biotechnology 15: 751±752, 1999. |
| URI: | http://dyuthi.cusat.ac.in/purl/4247 |
| Files | Size |
|---|---|
| Extracellular p ... d from marine sediment.pdf | (70.09Kb) |
| Abstract: | A potential fungal strain producing extracellular β-glucosidase enzyme was isolated from sea water and identified as ^ëéÉêJ Öáääìë=ëóÇçïáá BTMFS 55 by a molecular approach based on 28S rDNA sequence homology which showed 93% identity with already reported sequences of ^ëéÉêÖáääìë=ëóÇçïáá in the GenBank. A sequential optimization strategy was used to enhance the production of β-glucosidase under solid state fermentation (SSF) with wheat bran (WB) as the growth medium. The two-level Plackett-Burman (PB) design was implemented to screen medium components that influence β-glucosidase production and among the 11 variables, moisture content, inoculums, and peptone were identified as the most significant factors for β-glucosidase production. The enzyme was purified by (NH4)2SO4 precipitation followed by ion exchange chromatography on DEAE sepharose. The enzyme was a monomeric protein with a molecular weight of ~95 kDa as determined by SDS-PAGE. It was optimally active at pH 5.0 and 50°C. It showed high affinity towards éNPG and enzyme has a hã and sã~ñ of 0.67 mM and 83.3 U/mL, respectively. The enzyme was tolerant to glucose inhibition with a há of 17 mM. Low concentration of alcohols (10%), especially ethanol, could activate the enzyme. A considerable level of ethanol could produce from wheat bran and rice straw after 48 and 24 h, respectively, with the help of p~ÅÅÜ~êçãóÅÉë=ÅÉêÉîáëá~É in presence of cellulase and the purified β-glucosidase of ^ëéÉêÖáääìë=ëóÇçïáá BTMFS 55. |
| Description: | Biotechnology and Bioprocess Engineering 2009, 14: 457-466 DOI/10.1007/s12257-008-0116-2 |
| URI: | http://dyuthi.cusat.ac.in/purl/4256 |
| Files | Size |
|---|---|
| Extracellular β ... al Experimental Design.pdf | (390.7Kb) |
| Abstract: | Present work is aimed at development of an appropriate microbial technology for protection of larvae of macrobrachium rosenbergii from disease and to increase survival rate in hatcheries. Application of immunostimulants to activate the immune system of cultured animals against pathogen is the widely accepted alternative to antibiotics in aquaculture. The most important immunostimulant is glucan. Therefore a research programme entitled as extraction of glucan from Acremonium diospyri and its application in macrobrachium rosenbergii larval rearing system along with bacterians as microspheres. The main objectives of the study are development of aquaculture grade glucan from acremonium diospyri, microencapsulated drug delivery system for the larvae of M. rosenbergii and microencapsulated glucan with bacterian preparation for the enhanced production of M. rosenbergii in larval rearing system. Based on the results of field trials microencapsulated glucan with bacterin preparation, it is concluded that the microencapsulated preparation at a concentration of 25g per million larvae once in seven days will enhance the production and quality seed of M. rosenbergii. |
| URI: | http://dyuthi.cusat.ac.in/purl/83 |
| Files | Size |
|---|---|
| Dyuthi-T0105.pdf | (2.104Mb) |
| Description: | International School of Photonics, Cohin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2690 |
| Files | Size |
|---|---|
| Dyuthi-T0742.pdf | (3.973Mb) |
| Abstract: | The thesis presented the fabrication and characterisation of polymer optical fibers in their applications as optical amplifier and smart sensors.Optical polymers such as PMMA are found to be a very good host material due to their ability to incorporate very high concentration of optical gain media like fluorescent dyes and rare earth compounds. High power and high gain optical amplification in organic dye-doped polymer optical fibers is possible due to extremely large emission cross sections of oyes. Dye doped (Rhodamine 6G) optical fibers were fabricated by using indigenously developed polymer optical fiber drawing tower. Loss characterization of drawn dye doped fibers was carried out using side illumination technique. The advantage of the above technique is that it is a nondestructive method and can also be used for studying the uniformity in fiber diameter and doping. Sensitivity of the undoped polymer fibers to temperature and microbending were also studied in its application in smart sensors.Optical amplification studies using the dye doped polymer optical fibers were carried out and found that an amplification of l8dB could be achieved using a very short fiber of length lOcm. Studies were carried out in fibers with different dye concentrations and diameter and it was observed that gain stability was achieved at relatively high dye concentrations irrespective of the fiber diameter.Due to their large diameter, large numerical aperture, flexibility and geometrical versatility of polymer optical fibers it has a wide range of applications in the field of optical sensing. Just as in the case of conventional silica based fiber optic sensors, sensing techniques like evanescent wave, grating and other intensity modulation schemes can also be efficiently utilized in the case of POF based sensors. Since polymer optical fibers have very low Young's modulus when compared to glass fibers, it can be utilized for sensing mechanical stress and strain efficiently in comparison with its counterpart. Fiber optic sensors have proved themselves as efficient and reliable devices to sense various parameters like aging, crack formation, weathering in civil structures. A similar type of study was carried out to find the setting characteristics of cement paste used for constructing civil structures. It was found that the measurements made by using fiber optic sensors are far more superior than that carried out by conventional methods. More over,POF based sensors were found to have more sensitivity as well. |
| Description: | International School of Photonics, Cochin University of Science & Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2333 |
| Files | Size |
|---|---|
| Dyuthi-T0607.pdf | (5.013Mb) |
| Abstract: | This Thesis deals with the fabrication and characterization of novel all-fiber components for access networks. All fiber components offer distinctive advantages due to low forward and backward losses, epoxy free optical path and high power handling. A novel fabrication method for monolithic 1x4 couplers, which are vital components in distributed passive optical networks, is realized. The fabrication method differs from conventional structures with a symmetric coupling profile and hence offers ultra wideband performance and easy process control. New structure for 1x4 couplers, by fusing five fibers is proposed to achieve high uniformity, which gives equivalent uniformity performance to 1x4 planar lightwave splitters, isolation in fused fiber WDM is improved with integration of long period gratings. Packaging techniques of fused couplers are analyzed for long term stability. |
| Description: | International School of Photonics, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/xmlui/purl/1917 |
| Files | Size |
|---|---|
| Dyuthi-T0408.pdf | (2.489Mb) |
| Abstract: | In this context,in search of new materials based on chalcogenide glasses,we have developed a novel technique for fabrication of chalcogenide nano composites which are presented in this theis.The techniques includes the dissolution of bulk chalcogenide glasses in amine solvent.This solution casting method allows to retain the attractive optical properties of chalcogenide glasses enabling new fabrication routes for realization of large area thick-thin films with less cost. Chalcogenide glass fiber geometry opens new possibilities for a large number of applications in optics,like remote temperature measurements ,CO2 laser power delivery, and optical sensing and single mode propagation of IR light.We have fabricated new optical polymer fibers doped with chalcogenide glasses which can be used for many optical applications.The present thesis also describes the structural,thermal and optical characterization of certain chalocogenide based materials prepared for different methods and its applications. |
| Description: | International School of Photonics, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2780 |
| Files | Size |
|---|---|
| Dyuthi-T0803.pdf | (10.61Mb) |
| Abstract: | The fabrication and characterization of a Rhodamine 6G-doped polymer optical fiber amplifier have been carried out. Two different schemes were employed to characterize the optical fiber: the stripe illumination technique to study the fiber as a gain medium and another technique to study its performance as an amplifier. We observed a spectral narrowing from 42 to 7 nm when the pump energy was increased to 6 mJ in the stripe illumination geometry. A gain of 18 dB was obtained in the amplifier configuration. The effects of pump power and dye concentration on the performance of the fiber as an amplifier were also studied. |
| URI: | http://dyuthi.cusat.ac.in/purl/2466 |
| Files | Size |
|---|---|
| Dyuthi-P0263.pdf | (749.2Kb) |
| Abstract: | Rhodamine 6G and Rhodamine B dye mixture doped polymer optical fiber amplifier (POFA), which can operate in a broad wavelength region (60 nm), has been successfully fabricated and tested. Tunable operation of the amplifier over a broad wavelength region is achieved by mixing different ratios of the dyes. The dye doped POFA is pumped axially using 532 nm, 10 ns laser pulses from a frequency doubled Q-switched Nd: YAG laser and the signals are taken from an optical parametric oscillator. A maximum gain of 22.3 dB at 617 nm wavelength has been obtained for a 7 cm long dye mixture doped POFA. The effects of pump energy and length of the fiber on the performance of the fiber amplifier are also studied. There exists an optimum length for which the amplifier gain is at a maximum value. |
| URI: | http://dyuthi.cusat.ac.in/purl/2500 |
| Files | Size |
|---|---|
| Dyuthi-P0272.pdf | (515.8Kb) |
| Abstract: | Holographic technology is at the dawn of quick evolution in various new areas including holographic data storage, holographic optical elements, artificial intelligence, optical interconnects, optical correlators, commerce, medical practice, holographic weapon sight, night vision goggles and games etc. One of the major obstacles for the success of holographic technology to a large extent is the lack of suitable recording medium. Compared with other holographic materials such as dichromated gelatin and silver halide emulsions, photopolymers have the great advantage of recording and reading holograms in real time and the spectral sensitivity could be easily shifted to the type of recording laser used by simply changing the sensitizing dye. Also these materials possess characteristics such as good light sensitivity, real time image development, large dynamic range, good optical properties, format flexibility, and low cost. This thesis describes the attempts made to fabricate highly economic photopolymer films for various holographic applications. In the present work, Poly (vinyl alcohol) (PVA) and poly (vinyl chloride) (PVC) are selected as the host polymer matrices and methylene blue (MB) is used as the photosensitizing dye. The films were fabricated using gravity settling method. No chemical treatment or pre/post exposures were applied to the films. As the outcome of the work, photopolymer films with more than 70% efficiency, a permanent recording material which required no fixing process, a reusable recording material etc. were fabricated. |
| URI: | http://dyuthi.cusat.ac.in/purl/668 |
| Files | Size |
|---|---|
| Dyuthi-T0409.pdf | (3.806Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.