Thomas, J; Kumar, G A; Unnikrishnan, N V; Nampoori, V P N; Vallabhan, C P G(Elsevier, 2000)
[+]
[-]
Abstract:
Optical absorption and emission spectral studies of various phthalocyanine (Pc) molecules in PVA matrix have been reported for the first time. The recorded spectra are analyzed to get the important spectral parameters, such as optical absorption cross-section (σa), emission cross-section (σe), oscillator strength (f), fluorescence bandwidth (Δλ), emission wavelength (λ), radiative decay time (τ) and optical gain (G). Analysis shows that the emission cross-section and optical gain are maximum in the NdHPc2-doped PVA matrix. However, a comparison of the calculated emission parameters with that of borate glass matrix show that they are many times smaller in the present matrix.
Krishnamoorthy, A; Vishwanath C, Narayanan; Deepak, T G(Korean Society for Computational & Applied mathematics, 2007)
[+]
[-]
Abstract:
In this paper, we study a k-out-of-n system with single server
who provides service to external customers also. The system consists of
two parts:(i) a main queue consisting of customers (failed components of
the k-out-of-n system) and (ii) a pool (of finite capacity M) of external
customers together with an orbit for external customers who find the pool
full. An external customer who finds the pool full on arrival, joins the orbit
with probability
and with probability 1−
leaves the system forever. An
orbital customer, who finds the pool full, at an epoch of repeated attempt,
returns to orbit with probability (< 1) and with probability 1 − leaves
the system forever. We compute the steady state system size probability.
Several performance measures are computed, numerical illustrations are
provided.
Jude Martin, Mendez; Dr.George, K E(Cochin University of Science & Technology, October , 2009)
[+]
[-]
Abstract:
This study was undertaken in order to upgrade blends of HDPE and
PP, two of the most widely used standard plastics so as to widen their
application spectrum. Dicumyl peroxide was used as the modifier for the
upgradation. Optimum concentration of dicumyl peroxide required for
modification was detennined by measurement of mechanical, rheological,
thermal and morphological properties. Selected blends were used to prepare
recyclable composites with nylon clothes by compression moulding. The
composites were characterized by measurement of mechanical and thermal
properties. The composites were recycled and the mechanical propertics of
the recycled material were determined.
Description:
Dept.of Polymer Science and Rubber Technology,
Cochin University of Science and technology
Rosamma, Philip; Preetha, R; Jayaprakash, N S; Bright Singh, I S(The Society for Applied Microbiology, 2007)
[+]
[-]
Abstract:
Aim: To develop a new medium for enhanced production of biomass of an
aquaculture probiotic Pseudomonas MCCB 103 and its antagonistic phenazine
compound, pyocyanin.
Methods and Results: Carbon and nitrogen sources and growth factors, such as
amino acids and vitamins, were screened initially in a mineral medium for the
biomass and antagonistic compound of Pseudomonas MCCB 103. The selected
ingredients were further optimized using a full-factorial central composite
design of the response surface methodology. The medium optimized as per the
model for biomass contained mannitol (20 g l)1), glycerol (20 g l)1), sodium
chloride (5 g l)1), urea (3Æ3 g l)1) and mineral salts solution (20 ml l)1), and
the one optimized for the antagonistic compound contained mannitol (2 g l)1),
glycerol (20 g l)1), sodium chloride (5Æ1 g l)1), urea (3Æ6 g l)1) and mineral
salts solution (20 ml l)1). Subsequently, the model was validated experimentally
with a biomass increase by 19% and fivefold increase of the antagonistic
compound.
Conclusion: Significant increase in the biomass and antagonistic compound
production could be obtained in the new media.
Significance and Impact of the Study: Media formulation and optimization are
the primary steps involved in bioprocess technology, an attempt not made so
far in the production of aquaculture probiotics.
Rosamma, Philip; Preetha, R; Jayaprakash, N S; Bright Singh, I S(KSBB, 2007)
[+]
[-]
Abstract:
A marine isolate of Micrococcus MCCB 104 has been identified as an aquaculture probiotic antagonistic to VIbrio. In the
present study different carbon and nitrogen sources and growth factors in a mineral base medium were optimized for enhanced
biomass production and antagonistic activity against the target pathogen, Vibrio harveyi, following response surface
methodology (RSM). Accordingly the minimum and maximum limits of the selected variables were determined and a set of
fifty experiments programmed employing central composite design (CCD) of RSM for the final optimization. The response
surface plots of biomass showed similar pattern with that of antagonistic activity, which indicated a strong correlation between
the biomass and antagonism. The optimum concentration of the carbon sources, nitrogen sources, and growth factors
for both biomass and antagonistic activity were glucose (17.4 g/L), lactose (17 g/L), sodium chloride (16.9 g/L),
ammonium chloride (3.3 g/L), and mineral salts solution (18.3 mL/L).
Rani, Joseph(Indian Academy of Sciences, February 24, 2003)
[+]
[-]
Abstract:
Significant results of our experimental investigations on the dependence of pH on real time
transmission characteristics on recording media fabricated by doping PVC with complexed methylene blue
are presented. The optimum pH value for faster bleaching was found to be 4 . 5. In typical applications, the
illumination from one side, normal to the surface of this material, initiates a chemical sequence that records
the incident light pattern in the polymer. Thus direct imaging can be successfully done on this sample. The
recorded letters were very legible with good contrast and no scattering centres. Diffraction efficiency
measurements were also carried out on this material.
Sudha Kartha,C(Indian academy of science, February 24, 2003)
[+]
[-]
Abstract:
Significant results of our experimental investigations on the dependence of pH on real time
transmission characteristics on recording media fabricated by doping PVC with complexed methylene blue
are presented. The optimum pH value for faster bleaching was found to be 4×5. In typical applications, the
illumination from one side, normal to the surface of this material, initiates a chemical sequence that records
the incident light pattern in the polymer. Thus direct imaging can be successfully done on this sample. The
recorded letters were very legible with good contrast and no scattering centres. Diffraction efficiency
measurements were also carried out on this material.
Sreekumar,K(Indian academy of science, February 24, 2003)
[+]
[-]
Abstract:
Significant results of our experimental investigations on the dependence of pH on real time
transmission characteristics on recording media fabricated by doping PVC with complexed methylene blue
are presented. The optimum pH value for faster bleaching was found to be 4×5. In typical applications, the
illumination from one side, normal to the surface of this material, initiates a chemical sequence that records
the incident light pattern in the polymer. Thus direct imaging can be successfully done on this sample. The
recorded letters were very legible with good contrast and no scattering centres. Diffraction efficiency
measurements were also carried out on this material.
Rinku Mariam, Thomas; Dr.George, K E; Dr. Mathew, K T; Dr.Prathapan, S(Cochin University of Science & Technology, May , 2005)
[+]
[-]
Abstract:
The thesis deals with the preparation and dielectric characterization of
Poly aniline and its analogues in ISM band frequency of 2-4 GHz that includes part
of the microwave region (300 MHz to 300 GHz) of the electromagnetic spectrum
and an initial dielectric study in the high frequency [O.05MHz-13 MHz].
PolyaniIine has been synthesized by an in situ doping reaction under different
temperature and in the presence of inorganic dopants such as HCl H2S04, HN03,
HCl04 and organic dopants such as camphorsulphonic acid [CSA],
toluenesulphonic acid {TSA) and naphthalenesulphonic acid [NSA]. The variation
in dielectric properties with change in reaction temperature, dopants and
frequency has been studied. The effect of codopants and microemulsions on the dielectric properties has also been studied in the ISM band. The ISM band of
frequencies (2-4 GHz) is of great utility in Industrial, Scientific and Medical (ISM)
applications. Microwave heating is a very efficient method of heating dielectric
materials and is extensively used in industrial as well as household heating
applications.
Description:
Department of
Polymer Science and Rubber Technology,Cochin University of Science and
Technology
Rahana, Yoosuf; Dr.Jayaraj, M K(Cochin University of Science & Technology, October , 2007)
[+]
[-]
Abstract:
Two stage processes consisting of precursor preparation by thermal
evaporation followed by chalcogenisation in the required atmosphere is
found to be a feasible technique for the PV materials such as n-Beta In2S3,
p-CulnSe2, p-CulnS2 and p-CuIn(Sel_xSx)2. The growth parameters such as
chalcogenisation temperature and duration of chalcogenisation etc have been
optimised in the present study.Single phase Beta-In2S3 thin films can be obtained by sulfurising the indium
films above 300°C for 45 minutes. Low sulfurisation temperatures required
prolonged annealing after the sulfurisation to obtain single phase Beta-1n2S3,
which resulted in high material loss. The maximum band gap of 2.58 eV was
obtained for the nearly stoichiometric Beta-In2S3 film which was sulfurised at
350°C. This wider band gap, n type Beta-In2S3 can be used as an alternative to
toxic CdS as window layer in photovoltaics .The systematic study on the structural optical and electrical properties of
CuInSe2 films by varying the process parameters such as the duration of
selenization and the selenization temperature led to the conclusion that for
the growth of single-phase CuInSe2, the optimum selenization temperature is
350°C and duration is 3 hours. The presence of some binary phases in films
for shorter selenization period and lower selenization temperature may be
due to the incomplete reaction and indium loss. Optical band gap energy of
1.05 eV obtained for the films under the optimum condition.In order to obtain a closer match to the solar spectrum it is desirable to
increase the band gap of the CulnSe2 by a few meV . Further research
works were carried out to produce graded band gap CuIn(Se,S)2 absorber
films by incorporation of sulfur into CuInSe2. It was observed that when the
CulnSe2 prepared by two stage process were post annealed in sulfur atmosphere, the sulfur may be occupying the interstitial positions or forming
a CuInS2 phase along with CuInSe2 phase. The sulfur treatment during the
selenization process OfCu11 ln9 precursors resulted in Culn (Se,S)2 thin films.
A band gap of 1.38 eV was obtained for the CuIn(Se,S)2.The optimised thin films n-beta 1n2S3, p-CulnSe2 and p-Culn(Sel-xSx)2 can be
used for fabrication of polycrystalline solar cells.
Description:
Department of Physics,
Cochin University of Science and Technology
Ajitha, S; Dr. Sugunan, S(Cochin University of Science and Technology, September , 2008)
[+]
[-]
Abstract:
Mesoporous materials are of great interest to the materials community because of their potential applications for catalysis,separation of large molecules,medical implants,semiconductors,magnetoelectric devices.The thesis entitled 'Ordered Mesoporous Silica as supports for immobilization of Biocatalyst' presents how the pore size can be tuned without the loss in ordered structure for the entrapment of an industially important biocatalyst-amylase.Immobilization of enzymes on ordered mesoporous material has triggered new ooportunities for stabilizing enzymes with improved intrinsic and operational stabilities.
Description:
Department of Applied Chemistry,
Cochin University of Science and Technology
Kannan, V; Dr. Sreekumar, K(Cochin University of Science & Technology, August , 2011)
[+]
[-]
Abstract:
Catalysis is a technologically important field which determines the quality of life in future. Catalyst research in pharmaceutical industry,fine chemical synthesis and emission control demands supported catalysts in bulk quantities.In the present work it was observed that clay supported catalysts mentioned in various chapters could also be used for the synthesis of similar molecules. The K10Ti catalyst can be used for the synthesis similar substituted imidazole derivatives under solvent free conditions and synthetically important Mannich bases of substrates containing various substitutes.Al-pillared saponite can be used for acetalation of other polyhydroxy compounds like glycerol,mannitol etc.Cu-Pd KSF catalyst has found application in C-C bond forming reactions which can be applied to other reactions and similar methods can be adopted for the synthesis of other catalyst by changing the transition metals. Montmorillonite K10 catalysed synthesis of triarylpyridines can be extended to the synthesis tetrasubstuted pyroles.K10Ti can also be utilized for the synthesis of similar heterocycles.
Description:
Dept.of Applied Chemistry,Cochin University of Science and Technology
Knoevenagel condensation between carbonyl compounds and active methylene compounds as well as three component Mannich reaction between aldehydes, ketones and amines proceeded smoothly in water with good to excellent yield and high selectivity in the presence of zero and first generation poly(amidoamine) (PAMAM) dendrimers. The products and the catalyst were separated by simple biphasic extraction. The catalyst was found to be reusable.
Abdul Rasheed, T M; Nampoori, V P N; Sathianandan, K(Chemical Physics, 1986)
[+]
[-]
Abstract:
The vibrational overtone spectra 0f the liquid phase 1,2-dichloroethane and 1,2-dibromoethane in the spectral regions of
CH stretching local mode overtones corresponding to delta v CH= = 2 to delta v CH=5 are reported. The observed spectral features are
assigned using the local mode model. LocaI mode frequencies WCH and diagonal local mode anharmonicities XCH are
obtained from an analysis of the spectra. The local-local combinations observed are interpreted on the basis of a coupled CH
oscillator model hamiltonian. Local-normal combinations show complex structures and their possible assignments are given.
Abdul Rasheed, T M; Moosad, K P B; Nampoori, V P N; Sathianandan, K(Springer, September , 1989)
[+]
[-]
Abstract:
Vibrational overtone spectra of styrene (liquid) and polystyrene (solid), studied by the laser-induced thermal lens (for ΔV=6) and the conventional near infrared absorption (for ΔV=3–5) techniques, are reported. For polystyrene, the overtone energy-bond length correlation predicts that the aryl CH bonds are ∼0.0005 Å longer than that in benzene, while no such conclusions could be drawn on styrene. Thesp 3 CH overtones in polystyrene are observed on the low energy side of the aryl CH overtones.
Mohammed Yusuff, K K; Robinson, P P; Arun, Vasudevan; Manju, Sebastian; Ummer Aniz, Chennampilly(Springer, June 5, 2009)
[+]
[-]
Abstract:
The metal complex, [Ni(en)2(H2O)2](NO3)2
(en = ethylenediamine), was decomposed in a static furnace
at 200 C by autogenous decomposition to obtain
phase pure metallic nickel nanocrystallites. The nickel
metal thus obtained was studied by XRD, IR spectra, SEM
and CHN analysis. The nickel crystallites are in the
nanometer range as indicated by XRD studies. The IR
spectral studies and CHN analyses show that the surface is
covered with a nitrogen containing species. Thermogravimetric
mass gain shows that the product purity is high
(93%). The formed nickel is stable and resistant to oxidation
up to 350 C probably due to the coverage of nitrogen
containing species. Activation energy for the oxidation of
the prepared nickel nanocrystallites was determined by
non-isothermal methods and was found to depend on the
conversion ratio. The oxidation kinetics of the nickel
crystallites obeyed a Johnson–Mehl–Avrami mechanism
probably due to the special morphology and crystallite
strain present on the metal.