| Abstract: | Isora fibre-reinforced natural rubber (NR) composites were cured at 80, 100, 120 and 150°C using a low temperature curing accelerator system. Composites were also prepared using a conventional accelerator system and cured at 150°C. The swelling behavior of these composites at varying fibre loadings was studied in toluene and hexane. Results show that the uptake of solvent and volume fraction of rubber due to swelling was lower for the low temperature cured vulcanizates which is an indication of the better fibre/rubber adhesion. The uptake of aromatic solvent was higher than that of aliphatic solvent, for all the composites. As the fibre content increased, the solvent uptake decreased, due to the superior solvent resistance of the fibre and good fibre-rubber interactions. The bonding agent improved the swelling resistance of the composites due to the strong interfacial adhesion. Due to the improved adhesion between the fibre and rubber, the ratio of the change in volume fraction of rubber due to swelling to the volume fraction of rubber in the dry sample (V,) was found to decrease in the presence of bonding agent. At a fixed fibre loading, the alkali treated fibre composite showed a lower percentage swelling than untreated one for both systems showing superior rubber-fibre interactions. |
| URI: | http://dyuthi.cusat.ac.in/purl/806 |
| Files | Size |
|---|---|
| Lovely Mathew a ... of curing...,July2005.PDF | (6.828Mb) |
| Abstract: | Magnetic nanocomposites containing iron oxide particles embedded in a polymer matrix have been synthesized using the method of ion exchange. They have been characterized by using low temperature and room temperature magnetic measurements and Mo¨ ssbauer spectroscopy. The iron content in these samples has also been determined. The results have been analysed and explained. The physical and chemical properties of these nanocomposite materials are different from those of the bulk. Some of the unique properties of these materials find application in information storage, color imaging, ferrofluids and magnetic refrigeration |
| Description: | JOURNAL OF MATERIALS SCIENCE 36 (2001) 821– 824 |
| URI: | http://dyuthi.cusat.ac.in/purl/4367 |
| Files | Size |
|---|---|
| Effect of cycli ... ic nanocomposite based.pdf | (57.94Kb) |
| Abstract: | Effect of delayed icing on the microbial quality and shelf-life of Hilsa toll was studied . Fish iced in rigor condition had a shelf-life of 11 days irrespective of the state of rigor . Fish procured from the landing centre had a shelf-life of only 8 days . It showed the presence of coagulase positive staphylococci, faecal streptococci and E. coli. Total bacterial count was low in all the samples and it increased after spoilage |
| Description: | fishery technology,Vol. 27, 1990 |
| URI: | http://dyuthi.cusat.ac.in/purl/4118 |
| Files | Size |
|---|---|
| Effect of Delay ... Quality of Hilsa Toli.pdf | (422.3Kb) |
| Abstract: | Measurements of dc conductivity and dielectric constant show that deuteration causes an upward shift of the high temperature phase transition point from 186.5 to 191°C and a downward shift of the low temperature transition point from 10 to -1.5°C in LiNH4SO4. Mechanisms of phase transitions and of electrical transport in the crystal are discussed. |
| URI: | http://dyuthi.cusat.ac.in/purl/2503 |
| Files | Size |
|---|---|
| Dyuthi-P0280.pdf | (275.7Kb) |
| Description: | School of Industrial Fisheries, Cochin University of Science and Technology |
| URI: | http://hdl.handle.net/purl/2067 |
| Files | Size |
|---|---|
| Dyuthi-T0401.pdf | (9.038Mb) |
| Abstract: | In this paper we report the preparation and dielectric properties of poly o-toluidine:poly vinyl chloride composites in pellet and film forms. The composites were prepared using ammonium persulfate initiator and HCl dopant. The characterization is done by TGA and DSC. The dielectric properties including dielectric loss, conductivity, dielectric constant, dielectric heating coefficient, absorption coefficient, and penetration depth were studied in the microwave field. An HP8510 vector network analyzer with rectangular cavity resonator was used for the study. Sbands (2-4 GHz), C band (5-8 GHz), and X band (8-12 GHz) frequencies were used in the microwave field. Comparisons between the pellet and film forms of composites were also included. The result shows that the dielectric properties in the microwave field are dependent on the frequency and on the method of preparation. |
| URI: | http://dyuthi.cusat.ac.in/purl/800 |
| Files | Size |
|---|---|
| Honey John and ... ferent forms...Feb2006.PDF | (6.158Mb) |
| Abstract: | The latex industry has expanded over the years to meet the world demands for gloves, condoms, latex thread etc. Because of the strict specifications for the products and the unstable nature of the latex, as high as 15%, of the final latex products are rejected. Since waste latex rubber (WLR) represents a source of high quality rubber hydrocarbon, it is a potential candidate for generating reclaimed rubber of superior quality. Two types of WLR with different amounts of polysulfidic bridges are used in these experiments, which are reclaimed with variation of the concentration of the reclaiming agents, the reclamation temperature and time, Di phenyldisultide, 2-aminophenyldisulfide and 2,2'-dibenzamidodiphenyldisulfide (DBADPDS) are used as reclaiming agents, and the effect of diphenyldisulfides (DPDS) with different substituents, on the reclamation efficiency of WLR is investigated. A kinetic study of the reclamation reaction with the three reclaiming agents is done. The reaction rates and activation energies are calculated and compared with literature values. The comparative study of the three different reclaiming agents shows that (DBADPDS) is able to break the crosslinks at temperature levels 20'C below the temperature levels normally used with DPDS. Another advantage of this reclaiming agent is the reduced smell during the reclamation process and of the final reclaims, one of the most important shortcomings of other disulfides used for this purpose. |
| URI: | http://dyuthi.cusat.ac.in/purl/822 |
| Files | Size |
|---|---|
| V V Rajan,Effec ... isulfides....Sept.2006.PDF | (12.78Mb) |
| Abstract: | The split-pulse laser method is used to reinvestigate the optical attenuation of distilled water in the region from 430 to 630 nm. The studies are then extended to ionic solutions of NaCl, MgCl2, and Na2SO4, these salts forming the major constituents of seawater. The effect of the concentration of these constituents on optical attenuation is investigated. Further, optical attenuation studies are carried out for the region from 430 to 630 nm for an aqueous solution prepared with all the major constituents in the same proportions as in natural seawater. These values are then compared with values obtained for natural seawater. The relative role of dissolved salts and suspended particles on optical attenuation in seawater is discussed. The lowest attenuation is observed at ~450 nm for all solutions and is found to coincide with that for distilled water. |
| URI: | http://dyuthi.cusat.ac.in/purl/2623 |
| Files | Size |
|---|---|
| Dyuthi-P0184.pdf | (929.4Kb) |
| Abstract: | The effect of dopants with different valencies and ionic radii on the densification, structural ordering, and microwave dielectric properties of Ba(Mg1/3Ta2/3)O3 (BMT) is investigated. It is found that dopants such as Sb2O5, MnO, ZrO2, WO3, and ZnO improve the microwave dielectric properties of BMT. Addition of trivalent dopants is detrimental to the cation ordering and dielectric properties of BMT. A correlation between the microwave dielectric properties of BMT and ionic radii of the dopant has been established. The variation of the dielectric properties of pure and doped BMT at cryogenic temperatures is also discussed. |
| URI: | http://dyuthi.cusat.ac.in/purl/964 |
| Files | Size |
|---|---|
| JAP05c.pdf | (654.8Kb) |
| Abstract: | The effect of dopants with different valencies and ionic radii on the densification, structural ordering, and microwave dielectric properties of Ba(Mg1t3Tazt3)O3 (BMT) is investigated. It is found that dopants such as Sb,05, MnO, ZrO,, WO1, and ZnO improve the microwave dielectric properties of BMT. Addition of trivalent dopants is detrimental to the cation ordering and dielectric properties of BMT. A correlation between the microwave dielectric properties of BMT and ionic radii of the dopant has been established. The variation of the dielectric properties of pure and doped BMT at cryogenic temperatures is also discussed |
| URI: | http://dyuthi.cusat.ac.in/purl/1489 |
| Files | Size |
|---|---|
| The effect of d ... o.33Ta0.67)03 ceramics.PDF | (5.114Mb) |
| URI: | http://dyuthi.cusat.ac.in/purl/1491 |
| Files | Size |
|---|---|
| Effect of Nonst ... of Ba(Mgo.33Tao.67)03.PDF | (6.590Mb) |
| Abstract: | ABSTRACT: Polyaniline was synthesized by using ammonium persulfate initiator in the presence of 1M HC1. It was dried under different drying conditions like room temperature drying (for 48 h), oven drying (at 50-60°C for 8 h under a vacuum), and vacuum drying (at room temperature for 16 h). The conductivities of these samples were measured at microwave frequencies. These samples were also pelletized and the measurements were repeated. The cavity perturbation technique was used for the study. |
| URI: | http://dyuthi.cusat.ac.in/purl/852 |
| Files | Size |
|---|---|
| Dyuthi-P00420.pdf | (241.2Kb) |
| Abstract: | Starve feeding of single screw extruder was described as an important means of improving the performance characteristics of the extruder. In addition to such improvement with versatility, the starve feeding technique also may affect the mechanical properties of the extrudate since the heat transfer an(l mixing characteristics in the starve fed and Hood fed extruders are not the same. Since the material is more loosely packed in the channels of the starve fed extruder, there may be greater bed mobility and uniformity. Further, the. thermal an(l shear induced degradation are also less since possibilities of developing local high temperatures are less compared to a densely compacted extruder bed. This study has been undertaken mainly to explore the effect of feeding rate on the mechanical properties of rubber and plastic extrudates since the effect of feeding rate has not been analysed from this angle so far. |
| Description: | Department of Polymer Science and Rubber Technology Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/3896 |
| Files | Size |
|---|---|
| Dyuthi-T1786.pdf | (12.48Mb) |
| Abstract: | Selected grades of low density polyethylene (LDPE) polystyrene (PS) were extruded in a laboratory extruder by varying the feeding rate at different revolutions per minute and temperatures. The mechanical properties of the extruded plastic sheets were determined. LDPE shows a marked variation in mechanical properties with feeding rate while PS shows a marginal change in mechanical properties with feeding rate. However, for both plastics there is a particular feeding rate in the starved region which results in maximum mechanical properties. |
| URI: | http://dyuthi.cusat.ac.in/purl/863 |
| Files | Size |
|---|---|
| P J Joseph Fran ... of feeding..,July1997.PDF | (8.184Mb) |
| Abstract: | Biosocial profile can produce variations in Gender-role Orientation of executives. Biosocial variables are not responsible for the development of Communication Style except in cases of number of children, dual career family and fathers occupation. Gender-role orientation is a function of Communication Style. Executive performance is a function of Communication Style.Gender- role orientation can have a decisive influence on executive performance. The cumulative effect of Communication Style and gender role orientation can produce variations in executive performance. Open Communication Style is predominantly responsible for the creation of a higher level executive performance than other Communication Styles. |
| Description: | School of Management Studies, Cochin University of Science & Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2865 |
| Files | Size |
|---|---|
| Dyuthi-T0862.pdf | (3.807Mb) |
| Abstract: | The effect of glass additives on the densification , phase evolution, microstructure and microwave dielectric properties of Ba(Mg1;3 Ta2i3)03 (BMT) was investigated . Different weight percentages of quenched glass such as B203 , Si02, B203-SiO2, ZnO-B203, 5ZnO-2B2O3, Al203-SiO2, Na20-2B203.10H20, BaO-B203-SiO2, MgO-B203-SiO2, PbO-B203-SiO2 , ZnO-B203-SiO2 and 2MgO-Al203-5SiO2 were added to calcined BMT precursor . The sintering temperature of the glass -added BMT samples were lowered down to 1300 °C compared to solid-state sintering where the temperature was 1650 °C. The formation of high temperature satellite phases such as Ba5Ta4O15 and Ba7Ta6O22 were found to be suppressed by the glass addition . Addition of glass systems such as B203, ZnO-B203, 5ZnO-2B203 and ZnO-B203-SiO2 improved the densification and microwave dielectric properties. Other glasses were found to react with BMT to form low-Q phases which prevented densification . The microwave dielectric properties of undoped BMT with a densification of 93 . 1 % of the theoretical density were Cr = 24 . 8, Tr = 8 ppm/°C and Q„ x f= 80,000 GHz. The BMT doped with 1.0 wt% of B203 has Q„ x f = 124,700GHz, Cr = 24.2, and T f = -1.3 ppm /°C. The unloaded Q factor of 0.2 wt% ZnO-B203-doped BMT was 136,500 GHz while that of 1.0 wt% of 5ZnO-2B203 added ceramic was Q„ x f= 141,800 GHz . The best microwave quality factor was observed for ZnO -B203-SiO2 (ZBS) glass-added ceramics which can act as a perfect liquid-phase medium for the sintering of BMT. The microwave dielectric properties of 0.2wt% ZBS-added BMT dielectric was Q„ x f= 152,800 GHz, F,= 25.5, and Tr = - 1.5 ppm/°C |
| URI: | http://dyuthi.cusat.ac.in/purl/1495 |
| Files | Size |
|---|---|
| Effect of Nonst ... of Ba(Mgo.33Tao.67)03.PDF | (6.590Mb) |
| Abstract: | Organic-inorganic nanocomposites combine unique properties of both the constituents in one material. Among this group of materials, clay based as well as ZnO, TiO2 nanocomposites have been found to have diverse applications. Optoelectronic devices require polymerinorganic systems to meet certain desired properties. Dielectric properties of conventional polymers like poly(ethylene-co-vinyl acetate) (EVA) and polystyrene (PS) may also be tailor tuned with the incorporation of inorganic fillers in very small amounts. Electrical conductivity and surface resistivity of polymer matrices are found to improve with inorganic nanofillers. II-VI semiconductors and their nano materials have attracted material scientists because of their unique optical properties of photoluminescence, UV photodetection and light induced conductivity. Cadmium selenide (CdSe), zinc selenide (ZnSe) and zinc oxide (ZnO) are some of the most promising members of the IIVI semiconductor family, used in light-emitting diodes, nanosensors, non-linear optical (NLO) absorption etc. EVA and PS materials were selected as the matrices in the present study because they are commercially used polymers and have not been the subject of research for opto-electronic properties with semiconductor nanomaterials |
| URI: | http://dyuthi.cusat.ac.in/purl/5111 |
| Files | Size |
|---|---|
| Dyuthi-T 2176.pdf | (17.16Mb) |
| Abstract: | In the present scenario of energy demand overtaking energy supply top priority is given for energy conservation programs and policies. Most of the process plants are operated on continuous basis and consumes large quantities of energy. Efficient management of process system can lead to energy savings, improved process efficiency, lesser operating and maintenance cost, and greater environmental safety. Reliability and maintainability of the system are usually considered at the design stage and is dependent on the system configuration. However, with the growing need for energy conservation, most of the existing process systems are either modified or are in a state of modification with a view for improving energy efficiency. Often these modifications result in a change in system configuration there by affecting the system reliability. It is important that system modifications for improving energy efficiency should not be at the cost of reliability. Any new proposal for improving the energy efficiency of the process or equipments should prove itself to be economically feasible for gaining acceptance for implementation. In order to arrive at the economic feasibility of the new proposal, the general trend is to compare the benefits that can be derived over the lifetime as well as the operating and maintenance costs with the investment to be made. Quite often it happens that the reliability aspects (or loss due to unavailability) are not taken into consideration. Plant availability is a critical factor for the economic performance evaluation of any process plant.The focus of the present work is to study the effect of system modification for improving energy efficiency on system reliability. A generalized model for the valuation of process system incorporating reliability is developed, which is used as a tool for the analysis. It can provide an awareness of the potential performance improvements of the process system and can be used to arrive at the change in process system value resulting from system modification. The model also arrives at the pay back of the modified system by taking reliability aspects also into consideration. It is also used to study the effect of various operating parameters on system value. The concept of breakeven availability is introduced and an algorithm for allocation of component reliabilities of the modified process system based on the breakeven system availability is also developed. The model was applied to various industrial situations. |
| Description: | Division of Mechanical Engineering,Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/purl/2815 |
| Files | Size |
|---|---|
| Dyuthi-T0835.pdf | (1.823Mb) |
| Abstract: | Cochin backwaters, a tropical barbuilt estuary is well known for its prawn, molluscan and demersal fisheries. Also it formed the dumping area for sewage,235 retting of husks and discharge of effluents from industries located on either side of it. As a result the fishery is being gradually dwindled year after year due to the lowering of the water quality. The effect of industrial polution on the benthic community of this tropical estuary was worked out. An area extending over 21 km from the mouth of the estuary to upstream of industrial belt was selected. Temporal and spatial variations of 16 environmental parameters at 9 stations along the area were monitored monthly during 1981. Benthic fauna of these 9 stations consisted of amphipods , polychaetes, isopods, tanaidaceans, molluscs and other crustaceans (Decapods, Acetes, Alpheids, Balanus, insect larvae, chironomid larvae, cumacea and some fresh water forms ). Apart from these, sea anemone, flat worms, nematodes, sipunculoids, echinoderms and fishes were also encountered. 75 species belonging to 31 faunal groups were identified. Of these 31 groups, amphipods, polychaedes, isopods, tanaidaceans and molluscs were numerically abundant. Rest of the 26 groups (including 13 riverine forms) were found less significant due to their rare occurrence/low numerical abundance. Polychaetes and molluscs were the only major groups present at all the stations. |
| Description: | National Institute of Oceanography Regional Centre Cochin |
| URI: | http://dyuthi.cusat.ac.in/purl/3622 |
| Files | Size |
|---|---|
| Dyuthi-T1602.pdf | (9.975Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.